Owner's Manual

Operating18
Operating
2
Other Operations
Using Your Unit as an Alarm
Clock
1. Make sure that you have set the clock correctly.
(See“SettingtheClock”onpage9-10.)
2. PressandholdAlarm On/O on the back
panel.
3. The alarm sound sources blink. (FM (Tuner)/
USB/IPOD) While each of sound sources blinks,
select the one you want by pressing . If you
select FM (Tuner) mode, you can select the
station you preset by pressing / and
then press to save.
4. “ON(Time)”settingisdisplayed.
The hour setting blinks. Press / to select
the hour and then press to save.
5. Theminutesettingblinks.Press / to
select the minute and then press to save.
6. The volume setting blinks. Press / to
change the volume and then press to save.
• Alarm function only works when this unit is
turned o.
• You can check the setting status by pressing
Alarm On/O on the back panel two times.
• If you want to reset the alarm, repeat steps
2-6.
,
Note
Activate and Deactivate the
Alarm Timer
Press Alarm On/O repeatedly on the back panel
to activate or deactivate the timer.
-
If the timer is activated, “ ” is displayed.
-
If the timer is deactivated, “ ” is not displayed.
Stop Alarm Ring
-
When the alarm rings, press Alarm On/O on
the back panel or press
1
.
-
The alarm stops but the alarm settings remain.
• If you don’t set clock on your iPod/iPhone/
iPad, the unit will not be synchronized for
the clock with your iPod/iPhone/iPad.
• If you unplug the cord from an outlet, the
alarm setting you set is not stored.
• After setting a clock function, you can set
alarm function.
• Ifyoudonotpressanybuttonfor30
minutes after the alarm goes o, the alarm
will shut o automatically.
• If you set the clock and alarm, you can
check the time and alarm icon “
“ by
pressing Alarm On/O although the unit is
standby mode.
• If the time you set is up, the unit will be
turned on automatically.
,
Note
Snoozing
Thesnoozingfunctionwakesyouupevery10
minutes if you tap anywhere on the control panel
while the alarm activates.
“ZZZ” appears and “ ” blinks. To cancel the
snoozing function, press Alarm On/O or
1
.
Resume Playback
The unit memorizes the point where you pressed
. Press to resume playback.
Playing Repeatedly or
Randomly (USB only)
Press
h
repeatedly. Then the current le will be
played back repeatedly or randomly. (ONE/DIR/ALL/
RAND(RANDOM)/OFF)
ND5520-FM.BTWNLL_ENG.indd 18 12. 7. 11. �� 9:30