OWNER’S MANUAL Sound Bar System Please read this manual carefully before operating your set and retain it for future reference. NB2020A www.lg.com NB2020A-N0.DUSALLK.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: IMPORTANT SAFETY INSTRUCTIONS (1) This device may not cause harmful interference, and 1. Read these instructions. (2) This device must accept any interference received, including interference that may cause undesired operation. 3. Heed all warnings.
Table of Contents Table of Contents 1 Getting Started 2 6 6 6 7 8 8 9 9 Safety Information Accessories Introduction – Symbols Used in this Manual Remote control Top panel Rear panel Installing the sound bar Installing the cover foot 2 Connecting 10 11 11 Mounting the main unit on a wall Optional Equipment Connection – OPTICAL In connection NB2020A-N0.DUSALLK.
Table of Contents 4 Troubleshooting 14 Troubleshooting 5 Appendix 15 15 16 17 Maintenance – Handling the Unit Trademarks and Licenses Specifications 5 1 2 3 4 5 NB2020A-N0.DUSALLK.
Getting Started Accessories Introduction Please check and identify the supplied accessories. Symbols Used in this Manual 1 Getting Started ,,Note Indicates special notes and operating features. >>Caution Remote control (1) Batteries_ size AAA (1) Wall Mount Bracket Installation Template (1) Wall mount bracket (2) Optical cable (1) Cover foot (2) NB2020A-N0.DUSALLK.indd 6 Indicates cautions for preventing possible damages from abuse.
Getting Started Remote control 7 • • • • • • • • • • a • • • • • • • • • • 1 (Power): Switches the unit ON or OFF. DOLBY DRC (ON/ OFF) : Sets the Dobly DRC. • • • • • • • • • • b • • • • • • • • • • VOL -/+ : Adjusts speaker volume. AV SYNC -/+ : Synchronizes the audio and video. ,,Note 1 Getting Started : Mutes the sound.
Getting Started Top panel 1 Getting Started A 1 (Standby/On) B – / + (Volume) Adjusts speaker volume. Rear panel A S/W Download Connector - Only for service. NB2020A-N0.DUSALLK.
Getting Started Installing the sound bar Installing the cover foot You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc. You can extend the height of the unit. 9 1 Getting Started Place the unit in front of the TV and connect it to the device. (Refer to page11) 1. Turn the unit upside down. 2. After detaching a release layer on the cover foot, Put it on the foot of the unit. 3. Attached the foot firmly to the unit by pressing it on.
Connecting Mounting the main unit on a wall You can mount the main unit on a wall. Prepare screws and brackets. 2. When you mount it on a wall (concrete), use the wall plugs (Not supplied). You should drill holes. A guide sheet (Wall Mount Bracket Installation Template) is supplied to drill. Use the sheet to check the point to drill. Wall Mount Brac ket Installation Unit 2 Connecting Wall Mount Bracket Installation Template Template Wall mount bracket ,,Note 1.
Connecting 3. Remove the Wall Mount Bracket Installation Template. 11 ,,Note Detach the unit from the bracket as shown below. 4. Fix the brackets with screws (not supplied) as shown in the illustration below. 2 Connecting Optional Equipment Connection OPTICAL In connection Connect an optical output of external devices to the OPTICAL IN connector. 5. Hang the main unit onto the bracket as shown below.
Operating Operations DOLBY DRC (Dynamic Range Control) Makes the sound clear when the volume is turned down (Dolby Digital only). Set to DOLBY DRC by pressing DOLBY DRC ON. To cancel DOLBY DRC, press DOLBY DRC OFF. AV Sync 3 When receiving audio signals from TV, sound and images may not match. In that case, this function can adjust the delay time. Operating Use AV SYNC -/+ to scroll up and down through the delay amount, which you can set between 0 and 300ms.
Operating 13 Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. (LG TV only.) 3 Operation MUTE Turn the TV’s volume on or off INPUT Switch the TV’s input source between the TV and other input sources. 1 (TV POWER) Turn the TV on or off. VOL +/– Adjust the volume of the TV. PR/CH w/s Scan up or down through memorized channels.
Troubleshooting Troubleshooting PROBLEM CORRECTION Plug in the power cord. No Power No sound Check the condition by operating other electronic devices. Check the OPTICAL IN connection. The remote control is too far from the unit. The remote control does not work properly. Operate the remote control within about 23 ft (7m). There is an obstacle in the path of the remote control and the unit. Remove the obstacle. The battery in the remote control is exhausted. Replace the batteries with new one.
Appendix 15 Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
Appendix Trademarks and Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. 5 Appendix NB2020A-N0.DUSALLK.
Appendix 17 Specifications General Power requirements Refer to main label. Power consumption Refer to main label. Dimensions (W x H x D) (35.4 x 2.3 x 3.3) inches Net Weight (Approx.) 5.7 lbs Operating temperature 41 °F to 95 °F (5 °C to 35 °C) Operating humidity 5 % to 90 % Inputs DIGITAL IN (OPTICAL IN) 3 V (p-p), Optical jack x 1 Amplifier Stereo mode 20 W + 20 W (6 Ω at 1 kHz) Designs and specifications are subject to change without prior notice. 5 Appendix NB2020A-N0.DUSALLK.
LG Customer Information Center 1-800-243-0000 1-888-865-3026 USA, Consumer USA, Commercial Register your product Online! www.lg.com Printed in China NB2020A-N0.DUSALLK.