Owner's Manual

Connections
10
otes
If the audio format of the
digital output
does not
match the
capabilities
of
your
unit,
the receiver will
produce
a
strong,
distorted sound or no sound at all.
To see the audio format of the current unit in the
On-Screen
Display, press
AUDIO.
Connecting
to
Optional Equipment
Connecting
to
an
amplifier equipped
with two
chan-
nel
digital
stereo
(PCM)
or
to
an Audio/ Video
receiver
equipped
with
a
multi-channel
decoder
(Dolby DigitalTM,
MPEG 2 or
DTS)
Connect the OPTICAL OUT connector of this unit to the
corresponding
in
jack
on
your Amplifier
or Receiver.
AUX IN
R
L
COMPONENT
Pr
Pb
Y MONITOR OPTICAL
OUT
OUT
S-VIDEO
OUT
VIDEO OUT
(PROGRESSIVE SCAN)
Connecting
to USB
1
Connect the
USB
port
of USB
memory (or
MP3
player, etc)
to the
USB
connector
on
the front
panel.
2
Select
USB
function
pressing
the
USB
button
on
the front
panel
or on
the remote control.
"USB" will be shown on the
display
window.
otes
The DivX files in
your memory
card will not be able
to be
played.
Don't insert the more than one
memory
card in the
multi card reader.
The unit
may
not be
supported
a
part
of
memory
card or multi card reader.
Don't insert or
pull
out the
memory
card from the
card reader when
using
the card reader.
If there is no
memory
card in the card
reader,
it will
be
displayed
"NO USB". In this status
you
should
pull
out card reader and
pull
into the set
again
with
memory
card.
USB
Memory,
MP3
Player (or
Memory
Card
Reader,
etc.)