Owner's Manual

22
Operation
with
DVD
and Video
CD
Playing
a
DVD
and Video
CD
Playback Setup
Turn on the TV and select the video
input
source con-
nected to the DVD receiver.
Audio
system:
Turn on the audio
system
and select
the
input
source connected to the DVD receiver.
1
Press
OPEN/CLOSE
to
open
the disc
tray.
2
Load
your
chosen disc
in
the
tray,
with the
playback
side
facing
down.
3
Press
OPEN/CLOSE
to close the
tray.
READING
appears
on the TV
screen,
and
playback
starts
automatically.
If
playback
does not
start,
press
PLAY.
In some
cases,
the disc menu
might appear
instead.
If
a menu screen is
displayed
The menu screen
may
be
displayed
first after
loading
a
DVD or Video CD which offers a menu.
Use the
1
234
buttons to select the
title/chapter you
want to
view,
then
press
ENTER to start
playback.
Press TITLE or MENU to return to the menu screen.
Use the
1 2
3
4
buttons to select an
option you
want,
then
press
ENTER to view the
option.
Use the number buttons to select the track
you
want
to view.
Press RETURN to return to the menu screen.
Menu
setting
and the exact
operating procedures
for
using
the menu
may
differ
depending
on the disc.
Follow the instructions on the each menu screen.
You also
may
set PBC to Off under
setup.
See
page
20.
otes
--
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
(see
"Parental
Control",
on
page 21).
--
DVDs
may
have a
regional
code.
Your receiver will not
play
discs that have a
regional
code different from
your
receiver. The
regional
code
for this receiver is 4
(four).
General Features
ote
Unless stated
otherwise,
all
operations
described use
the remote control. Some features
may
also be
available on the
Setup
menu.
Moving
to another
TITLE
/GROUP
When a disc has more than one
title/group, you
can
move to another title as follows:
Press
DISPLAY,
then
press
the
appropriate
number
button
(0-9)
to select a
title/group
number.
Moving
to another CHAPTER/TRACK
When a title on a disc has more than one
chapter
or a
disc has more than one
track,
you
can move to another
chapter/track
as follows:
Press SKIP/SCAN . or >
briefly during
playback
to select the next
chapter/track
or to return to the
beginning
of the current
chapter/track.
Press . twice
briefly
to
step
back to the
previous chap-
ter/group/track.
To
go directly
to
any chapter during
DVD
playback, press
DISPLAY.
Then,
press
3/4 to select the
chapter/group/track
icon.
Then,
enter the
chapter/track
number
using
the numbered buttons
(0-9).
ote
For
two-digit
numbers,
press
the numbered buttons
(0-9)in rapid
succession.
Search
1 Press and hold SKIP/SCAN . or > for about
two seconds
during playback.
The receiver will now
go
into SEARCH mode.
2 Press and hold SKIP/SCAN . or >
repeatedly
to select the
required speed:
mX2, mX4, mX16,
mX100
(backward)
or
MX2, MX4, MX16,
MX100
(forward).
With a Video
CD,
the Search
speed changes:
mX2,
mX4, mX8,
(backward)
or
MX2, MX4, MX8,
(forward).
3 To return to normal
play, press
PLAY.
ote
When
using
a DVD audio disc that includes
pictures,
this
operation may
be
permitted
in some
picture
segments.
Pause
1 Press PAUSE/STEP
during playback.
2 To return to
playback, press
PLAY.
VCD1.1 VCD2.0 DVD-V
VCD1.1 VCD2.0 DVD-V
1 /12
1/6
1/3
1 /12
VCD1.1 DVD-A DVD-V
1/6 1/3
DVD-A DVD-V
VCD2.0
DVD-A
DVD-V
VCD1.1 VCD2.0 DVD-A DVD-V