Use & Care Guide

29
MAINTENANCE
ENGLISH
Thawing a Frozen Drain Line
1
Pour hot water in the washer tub and close the
door.
- Leave it for 10 minutes.
2
Press the Power button after 10 minutes.
3
Press the Spin Speed button for draining and
spinning.
4
Press the Start/Pause button.
- Check if the water drains.
Cleaning
Periodically clean the washing machine to help
maintain its performance and to minimize the
chance of malfunction.
Tub Clean
Improper installation or use of the washing
machine in a humid space for a long period of time
could lead to a buildup of detergent residue in the
washing machine that may produce mildew or
musty smells. If you clean the washer tub regularly
on a monthly basis using Tub Clean it will minimize
the possibility that detergent residue will build up
and mildew or musty smells may occur.
1
Add tub cleaner or lime scale remover into the
detergent dispenser drawer.
- Do not exceed the maximum detergent limit
line when you add it. Detergent may remain
in the washer tub after cleaning.
-
When you use liquid chlorine bleach,
load it
into the liquid chlorine bleach compartment.
-
When you use a powdered cleaner,
pull out
the liquid detergent cup and add it into the
main wash detergent compartment.
-
When you use cleaning tablets,
place them
directly into the washer tub. (Do not add tablet
cleaner to the drawer.)
2
Press the Power button.
3
Turn the cycle selector knob to select Tub Clean.
- message appears in the display.
- The indicator light for Tub Clean turns on.
4
Press the Start/Pause button.
NOTE
Never load laundry while using Tub Clean. The
y
laundry may be damaged. Make sure to clean
the washer tub when it is empty.
Leave the door open after finishing the laundry
y
to help keep the tub clean.
Repeat the Tub Clean cycle monthly.
y
If you notice mildew or musty smells, run Tub
y
Clean once a week for three consecutive weeks.
Safely and conveniently secure the door
y
slightly ajar with the magnetic door plunger.
This will promote air circulation and help the
machine to dry.