User's Guide L1717S Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached dealer when you on the product and quote this information to your require service.
Precautions Important This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety power cord supplied with the unit.
On Installation Do not allow anything to rest upon or roll over the power cord, and do not the display where the power cord is subject to damage. Do not use this display sink, laundry tub, in near water a wet such basement, as near a or near a place bathtub, washbowl, kitchen swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation.
Connecting Before the Display setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Unfolding 1. the stand base Place the monitor with its front Expand the stand base facing upward to its first on a cushion or soft cloth. step degree (70˚), pulling it apart with two hands. 2. Place the monitor with its front downward and then further expand degrees.
Connecting the Display Folding the stand 1. base Face the front of the monitor and push the monitor backwards, following the sequence shown in the picture. Be careful not to squash your hands while you fold the stand base. This illustration differ from the depicts the general model items shown in the picture. Do not touch folding or apply force of connection. Your monitor may to the monitor screen while the stand base.
Connecting the Display Using the Computer 1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a proper power outlet that is easily accessible and close to the display. NOTE simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. This is a Signal Cable Power Cord Analog signal D-sub Varies according to model.
Control Panel Functions Front Panel Controls + - Control Function MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for 5 seconds. The message "OSD LOCKED" should appear. You unlock the OSD controls at any time by pushing the MENU button for 5 seconds. The message "OSD can UNLOCKED" should appear.
Control Panel Functions Control Function AUTO/SET Use this button to enter Button Display. a selection in the On Screen AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode).
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, and setting menus.
On Screen Display(OSD) Selection and Adjustment procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. You were introduced to the Press the MENU Menu Name Button, then the main menu of the OSD appears.
On Screen Selection and Display(OSD) Main menu Sub Adjustment Description menu PICTURE PICTURE of the BRIGHTNESS To adjust the CONTRAST To adjust the contrast of the GAMMA Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. brightness screen. screen. MENU : Exit : Decrease + : Increase SET : Select another sub-menu - COLOR Select the screen color. 6500K: Slightly reddish white.
Main Sub menu Description menu TRACKING TRACKING CLOCK To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. PHASE To the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.
Troubleshooting Check the No following before calling for service. image appears Is the power cord of the display connected? Check and Is the power indicator light on? Press the Power button. Is the power on and the power indicator blue or Adjust the brightness properly if the power cord is connected to the power outlet. see and the contrast. green? Is the power indicator amber? saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.
Troubleshooting Display image Display is incorrect Position is incorrect. Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
Troubleshooting Have you installed the driver? display Have you installed the display driver? display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. Do you Make see an "Unrecognized monitor, Plug&Play (VESA DDC) Be sure to install the sure to check if the video card Plug&Play function.
Specifications Display 17 inches (43.2cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0.264 mm pixel pitch Sync Input Video Input Resolution Horizontal Freq. Vertical Freq. Input Form 30 Signal Input Input Form pin D-Sub Connector RGB Analog (0.
Specifications PRESET MODE Display Modes (Resolution) 123456789 10 11 *12 13 VGA VGA VGA VESA VESA VESA MAC VESA VESA MAC VESA VESA VESA Horizontal 31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.023 68.681 61.805 63.981 79.976 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 LED Color On Mode Green Sleep Mode Amber Off Mode Vertical Freq.
Specifications Optional - VESA wall mounting Connected to another object (stand type and wall- mounted type. This monitor accepts a VESAcompliant mounting interface pad.- optional) For further Mounting information, refer to the VESA Wall Instruction Guide.
Digitally yours