Owner's Manual

Operating24
Operating
4
Screen Saver
The screen saver appears when you leave the unit
in stop mode for about ve minutes.
System Select - Optional
You must select the appropriate system mode for
your TV system. If “NO DISC” appears in the display
window, press and hold PAUSE/STEP (
M
) for more
than ve seconds to select a system.
Displaying file information
(ID3 TAG )
While playing an MP3 le containing le
information, you can display the information by
pressing DISPLAY.
Radio Operations
Be sure that both FM/AM aerials are connected.
(Refer to the page 15)
Listening to the Radio
1. Press FUNCTION until FM/AM appears in the
display window.
The last received station is tuned in.
2. Press and hold TUN.(-/+) for about two seconds
until the frequency indication starts to change,
then release. Scanning stops when the unit
tunes in a station.
or
Press TUN.(-/+) repeatedly.
3. Adjust the volume by rotating VOL on the front
panel or by pressing VOL + or - on the remote
control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM/AM.
Before tuning, make sure that you have turned
down the volume.
1. Press FUNCTION until FM/AM appears in the
display window.
2. Select the desired frequency by using TUN.
(-/+).
3. Press PROG./MEMO. a preset number will ash
in the display window.
4. Press PRESET (
WS
) to select the preset
number you want.
5. Press PROG./MEMO.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
Deleting all the saved stations
1. Press and hold PROG./MEMO. for two seconds.
“ERASE ALL” will ash up on the unit display.
2. Press PROG./MEMO. to erase all of the saved
radio stations.
Improving poor FM reception
Press PLAY (
d
) (MO./ST.) on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception.
HT356SD-A2_DPERLLK_ENG_3810.indd 24 2010-12-09 �� 3:00:42