Owner's Manual

14
Connecting to the AV IN 3 Jacks
Connect the input jacks (AV IN 3) on the recorder to
the audio/video out jacks on your accessory
component, using audio/video cables.
Connecting a Digital Camcorder
Using the front panel DV IN jack, it is possible to
connect a DV digital camcorder and digitally transfer
DV tapes to DVD.
Use a DV cable (not supplied) to connect the DV
in/out jack of your DV camcorder to the front panel DV
IN jack of this recorder.
Note:
This jack is for connection to DV digital camcorder
only. It is not compatible with digital satellite tuners or
D-VHS video deccks.
Connecting to the Aerial
Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder. Plug one end of the aerial cable into the TV
socket on the recorder and the other end into the
aerial input socket on your TV set.
RF coaxial connection
Connect the OUT jack on the unit to the aerial input
jack on the TV using the 75-ohm Coaxial Cable
supplied (R). The OUT jack passes the signal through
from the AERIAL jack.
DV Digital Camcorder
Front of the unit
DV
IN/OUT
L
R
VIDEO
OUTPUT
AUDIO
OUTPUT
Rear of the unit
ANTENNA
INPUT
Aerial
Rear of the unit
Rear of TV
L
R
AUDIO INPUT
VIDEO
INPUT
SCART INPUT
R