Operation Manual

Care and Maintenance
ww
Don’t separate the screw and tube from the cap
assembly tank. Please clean the out surface.
1. Turn the knob shutter to open.
And pull out the water tank assembly.
2. After unlocking the clamp and remove it, clean
and fully rinse the inside/outside part of the
water tank by using neutral cleansing agent.
Water Tank
Clean and fully rinse the cap assembly tank & cap
tank by using neutral cleansing agent.
Especially for the groove part of the cap tank, it is
convenient to cleanse it by using a small brush.
Cap assembly tank & Cap tank
Cleaning
Be sure to unplug the power.
Before Cleaning
Clean the outside of the fridge-freezer with a soft
cloth soaked with hot water or liquid detergent.
If you use a detergent, be sure to wipe it with a
clean wet cloth.
Exterior
Same as above.
Interior
Wipe moisture out of dispenser and on the
dispenser pad using a cloth.
Exterior Dispenser
Check that the power cord is not damaged, power
plug has not overheated, and that the power plug
is tightly inserted into the outlet.
After Cleaning
Wipe moisture out around the door part and the
drip tray using a clean cloth.
Drip Tray
ww
Be sure to dry the appliance with a cloth after
washing it with water.
Do not use abrasive, petroleum, benzene,
thinner, hydrochloride acid, boiling water, rough
brush, etc, as they may damage parts of the
fridge-freezer.
32
WARNING
CAUTION