Owner's Manual

Precautions in using the touch buttons

• Use the touch buttons with clean and dry hands.

- In a humid environment, wipe out any moisture on the touch buttons

before using.

• Do not press the touch buttons hard to make it work.

- If you apply too much strength, it can damage the sensor of the

touch buttons.

• Touch the button that you want to work in order to operate the function

correctly.

• Be careful not to have any conductive material such as metallic object

on the touch buttons, and it can cause malfunctions.

Contents

Setting up 4

Main Unit 5

Remote control 6

Listening to CDs 7

Listening to the radio 8

Listening to the DAB radio 9

Listening to music from your portable player 9

Playing the iPod 10

Using an USB device 11

Setting the Clock 11

Recording to USB 12

Troubleshooting 13

Specifications 13

POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz.

WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused at 5 amp.

When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA approved type. Never use

this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer. If

the type of plug supplied is not suitable for the mains sockets in your home, then the plug should

be removed and a suitable type fitted. Please refer to the wiring instructions below:

WARNING: A mains plug removed from the mains lead of this unit must be destroyed. A mains

plug with bared wires is hazardous if inserted in a mains socket.

Do not connect either wire to the earth pin, marked with the letter E or with the earth symbol

or coloured green or green and yellow. If any other plug is fitted, use a 5 amp fuse, either in the

plug, or at the distribution board.

IMPORTANT: The wires in this mains lead are coloured in accordance with the following codes:

- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains lead of this unit

may not correspond with the coloured marking identifying the terminals in your plug, proceed as

follows: The wire which is coloured blue must be connected to the terminal which is marked with

the letter N or coloured black. The wire which is coloured brown must be connected to the

terminal which is marked with the letter L or coloured red.

FA164DAB-M0P_DGBRLL_ENG 9/21/09 1:59 PM Page 3