Owner's Manual

5
Introduction
Before Use
(Continued)
Maintenance and Service
Refer to the information in this
chapter
before
contacting
a service
technician.
Handling
the Unit
When
shipping
the
unit
Please save the
original
shipping
carton and
packing
materials. If
you
need to
ship
the
unit,
for maximum
protection, re-pack
the unit as it was
originally
packed
at
the
factory.
Keeping
the exterior
surfaces clean
?
Do not use volatile
liquids
such as insecticide
spray
near the unit.
?
Do not leave rubber or
plastic products
in contact with the unit for a
long
period
of time. since
they
leave marks on the surface.
Cleaning
the
unit
To clean the
player,
use a
soft,
dry
cloth. If the surfaces are
extremely dirty,
use a
soft cloth
lightly
moistened with a mild
detergent
solution.
Do not use
strong
solvents such as
alcohol, benzine,
or
thinner,
as these
might
damage
the surface of the unit.
Maintaining
the
Unit
The DVD
player
is a
high-tech,
precision
device. If the
optical pick-up
lens and
disc drive
parts
are
dirty
or
worn,
the
picture quality
could be diminished.
Depending
on the
operating
environment,
regular
inspection
and maintenance are
recommended after
every
1,000
hours of use.
For
details,
please
contact
your
nearest authorized service center.
Types
of
Playable
Discs
This unit
plays
DVD,
Video
CD,
Audio
CD, DVD±R, DVD±RW, SVCD,
and CD-R or CD-RW that contains audio
titles, MP3,
WMA or JPEG files.
Manufactured under license
from
Dolby
Laboratories.
"Dolby",
"Pro
Logic",
and the
double-D
symbol
are
trademarks
of
Dolby
Laboratories.
NOTES
?
Depending
on the conditions of the
recording
equipment
or the
CD-R/RW
(or DVD±R/±RW)
disc
itself,
some
CD-R/RW
(or DVD±R/±RW)
discs cannot be
played
on the unit.
?
Do not attach
any
seal or label to either side
(the
labeled side or the recorded
side)
of a disc.
?
Do not use
irregularly
shaped
CDs
(e.g.,
heart-shaped
or
octagonal)
since
they
may
result in malfunctions.
Notes
on
DVDs
and
Video CDs
Some
playback operations
of DVDs and Video CDs
may
be
intentionally
programmed
by
software manufacturers. This unit
plays
DVDs and Video CDs
according
to disc content
designed by
the software
manufacturer,
therefore some
playback
features
may
not be available or other functions
may
be added.
Regional
code
This DVD
player
is
designed
and manufactured for
playback
of
region
"3" encoded DVD software. This unit can
play only
DVD discs labeled "3" or "ALL".
If
you try
to
play
a DVD with a different
region
code from
your player,
the
message
"Check
Regional
Code"
appears
on
the TV screen.
3