Owner's Manual

11
Listening to Music Disc or files - more you
can do
Creating your own program
You can play the contents of a disc in the order you want by arranging the order
of the musics on the disc. To add a music(s) on the program list, press
PROGRAM to enter the program edit mode ( mark appears on the menu).
Select a desired music on the [List] then press ENTER to add the music to the
program list. Select a music from the program list then press ENTER to start
programmed playback. To clear a music from the program list, select the music
you want to clear then press CLEAR in program edit mode. To clear all music
from the program list, select [Clear All] then press ENTER in program edit
mode. The program is cleared when the disc is removed or the unit is turned
off.
Playing a CD-G disc
Once you insert an CD-G disc, a menu appears on the screen. Use vV to
select a track then press PLAY (
NN
). To display the CD-G menu during
playback, press STOP (
xx
) twice.
You can display the setup menu by pressing SETUP only when CD-G menu
appears on the TV screen.
Displaying file information (ID3 TAG)
While playing a MP3 file containing file information, you can display the
information by pressing DISPLAY repeatedly.
MP3/WMA music file requirement
MP3/WMA compatibility with this unit is limited as follows:
• File extensions: “.mp3”, “.wma”
• Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA)
• CD-R/RW, DVD±R/RW Format: ISO 9660
• Maximum Files/Folders: Less than 600 (total number of files and folders)
E
Listening to Music Disc or files
ON REMOTE
1 Open the disc tray:
ZZ
OPEN/CLOSE
2 Insert a disc: -
3Close the disc tray:
ZZ
OPEN/CLOSE
4 Select a music from the menu:
vv VV
, DVD MENU
To go directly to track/file, enter the track/file number
using the numbered buttons (0-9).
5 Start playback:
NN
PLAY
6To stop playback:
xx
STOP
DV440.450.452-P.BPOLLLK_7408ENG 9/24/09 5:59 PM Page 11