Owner's Manual

Introduction

Connect the Automotive adapter

This unit and its automotive adapter are designed for use in vehi-

cles that have 8.5-16 volt, negative ground electrical systems.

(This is standard for most vehicles.) If your vehicle has a different

type of electrical system, the DC power system cannot be used.

a Connect the automotive adapter to the DC IN jack on

the unit.

b Connect the automotive adapter to the car’s cigarette lighter

socket.

Caution

• To prevent electrical shock and possible damage to your unit or

vehicle, always unplug the automotive adapter from the cigarette

lighter socket before you remove the plug from your unit.

• A 3 amp. 250V fuse for protection is installed in the automotive

adapter.

• While the engine is being started, disconnect the automotive

adapter from the car’s cigarette lighter socket.

•

Do not operate your unit when the car battery is discharged.

Peak current from the car generator may cause the DC fuse to

blow.

• If the vehicle’s supply voltage drops below approximately 10

volts, your unit may not work properly.

• Do not leave your unit in a place where the temperature

exceeds 70°C (158°F), or the pick-up device may be damaged.

Examples include:

- Inside a car with the windows closed and in direct sunshine.

- Near a heating appliance.

Automotive adapter

• This automotive adapter operates on DC 8.5-16V.

• Contact an electrical parts distributor for assistance in selecting

a suitable automotive adapter.

• Manufactured by WANLIDA Digital Technology Co., Ltd.

Power Connections

(continued)

Cigarette lighter socket