Owner's Manual

Connections
(Continued)
Connecting
to
Optional Equipment
Connecting
to an
amplifier equipped
with two
channel
analog
stereo or
Dolby
Pro
Logic
ll/
Pro
Logic
Connect the Left and
Right
AUDIO OUT
jacks
on the
DVD
Player
to the audio left and
right
in
jacks
on
your
amplifier,
receiver,
or stereo
system, using
the audio
cables
(A).
Connecting
to an
amplifier equipped
with two
channel
digital
stereo
(PCM)
or to an Audio/
Video receiver
equipped
with a multi-channel
decoder
(Dolby DigitalTM,
MPEG
2,
or
DTS)
1
Connect one of the DVD
Player's
DIGITAL AUDIO
OUT
jacks (COAXIAL X)
to the
corresponding
in
jack
on
your amplifier.
Use an
optional digital
(coaxial X)
audio cable.
2
You will need to activate the
player's digital output.
(See "Digital
Audio
Output"
on
page 13).
Digital
Multi-channel sound
A
digital
multi-channel connection
provides
the best
sound
quality.
For this
you
need a multi-channel
Audio/Video receiver that
supports
one or more of the
audio formats
supported by your
DVD
Player (MPEG
2,
Dolby Digital
and
DTS).
Check the receiver manual and
the
logos
on the front of the receiver.
Caution:
Due to the DTS
Licensing agreement,
the
digital output
will be in DTS
digital
out when DTS audio stream is
selected.
Notes
--
If the audio format of the
digital output
does not match
the
capabilities
of
your
receiver,
the receiver will
produce
a
strong,
distorted sound or no sound at all.
--
Six Channel
Digital
Surround Sound via
digital
con-
nection can
only
be obtained if
your
receiver is
equipped
with a
Digital
Multi-channel decoder.
--
To see the audio format of the current DVD in the on-
screen
display, press
AUDIO.
10
Amplifier (Receiver)
Rear of DVD
player
A X
R
L
AUDIO INPUT DIGITAL INPUT
COAXIAL