Owner's Manual

11
Audio Connection to
Optional Equipment
Connect the
DVD
player
to
your optional equipment
for audio
output.
Amplifier equipped
with
2-channel
analog
stereo
or
Dolby
Pro
Logic
ll /
Pro
Logic:
Connect the left
and
right
AUDIO OUT
jacks
on the
DVD
player
to the
audio left and
right
IN
jacks
on
your amplifier,
receiver,
or stereo
system, using
the audio cables
(A).
Amplifier equipped
with
2-channel
digital
stereo
(PCM)
or audio
/
video receiver
equipped
with
a
multi-channel decoder
(Dolby DigitalTM,
MPEG
2,
or
DTS):
Connect one of the
DVD
Player's
DIGITAL
AUDIO OUT
jacks (OPTICAL
O or COAXIAL
X)
to the
corresponding
in
jack
on
your amplifier.
Use an
optional digital (optical
O or coaxial
X)
audio cable.
Digital
Multi-channel sound
A
digital
multi-channel connection
provides
the best
sound
quality.
For this
you
need a multi-channel audio
/
video receiver that
supports
one or more of the
audio formats
supported by your
DVD
player
such as
MPEG
2,
Dolby Digital
and DTS. Check the receiver
manual and the
logos
on the front of the receiver.
Notes:
?
If
the audio format of the
digital output
does not
match the
capabilities
of
your
receiver,
the receiver
produces
a
strong,
distorted sound or no sound at all.
?
Six Channel
Digital
Surround Sound via a
digital
connection can
only
be obtained
if
your
receiver is
equipped
with
a
Digital
Multi-channel decoder.
?T
o see the audio format of the current
DVD in
the
on-screen
display, press
AUDIO.
Analog
connection to a multi-channel
A/V
receiver
with
6 Channel connectors
(Dolby Digital):
This
DVD
Player
contains a multi-channel decoder.
This enables
playback
of DVDs recorded
in
Multi-channel Surround without the need for an
optional
decoder.
Make the
appropriate
Sound
settings
for
Analog
Output
and
Speaker Settings
in
the
setup
menu. See
page
28.
Amplifier (Receiver)
Rear of DVD
player
A X O
AUDIO INPUT DIGITAL INPUT
OPTICAL COAXIAL