Owner's Manual

10
Setting up
the
Player
The
picture
and sound of a
nearby
TV, VCR,
or radio
may
be distorted
during playback.
If
this
occurs,
position
the
player away
from the
TV, VCR,
or
radio,
or turn off the unit after
removing
the disc.
DVD
Player
Connections
Depending
on
your
TV
and other
equipment
there are
various
ways you
can connect the
player.
Please refer
to the manuals of
your
TV,
stereo
system
or other
devices as
necessary
for additional connection
information.
Video and Audio Connections to Your
TV
Make sure the
DVD
player
is connected
directly
to the
TV
and not to a
VCR,
otherwise the
DVD
image
could
be distorted
by
the
copy protection system.
Video: Connect the VIDEO OUT
jack
on the
DVD
player
to the video
in
jack
on the
TV
using
the
video cable
(V).
S-Video: Connect the S-VIDEO OUT
jack
on the
DVD
Player
to the S-Video
in
jack
on the
TV
using
the S-Video cable
(S).
Component
Video
(Color Stream):
Connect the
COMPONENT VIDEO OUT/PROGRESSIVE
SCAN
jacks
on the
DVD
Player
to the
corresponding
in
jacks
on the
TV
using
an
Y
Pb
Pr
cable
(C).
Progressive
Scan
(ColorStream pro):
?
If
your
television is a
high-definition
or
"digital ready"
television,
you may
take
advantage
of the
DVD
Player's progressive
scan
output
for the
highest
video resolution
possible.
?
If
your
TV
does not
accept
the
Progressive
Scan
format,
the
picture
will
appear
scrambled
if
you try Progressive
Scan on the
DVD
Player.
Notes:
?
Set the
Progressive
to "On" on the
setup
menu for
progressive signal,
see
page
14.
?
Set the
progressive
to "Off"
by removeing any
disc
from the unit and close the disc
tray.
see that "no
disc" is
displayed
on the
display
window. Then
press
STOP and hold
it
for five seconds before
releasing
it
or
press
the PROGRESSIVE SCAN button on the
DVD
player.
?P
rogressive
scan does not work
with
the
analog
video connections
(yellow
VIDEO OUT
jack).
Audio Connection to Your
TV:
Connect the left and
right
AUDIO OUT
jacks
of the
DVD
Player
to the audio left and
right
IN
jacks
on the
TV
(A) using
the audio cables. Do not connect the
DVD
Player's
AUDIO OUT
jack
to the
phone
in
jack
(record deck)
of
your
audio
system.
Installation and
Setup