Owner's Manual

2727
TROUBLE SHOOTING GUIDE
•If a problem occurs check below to see whether this can be solved.
•In the unlikely event that the problem cannot be rectified, please contact a service engineer.
Problem
No lights come on when
the power is turned on.
• Check the plug.
• Check the electricity.
• Call for service.
• Plug is not properly inserted into
the socket.
• Fuses blown or circuit breaker
tripped.
• The electricity from the house was
cut off.
The machine does not
start.
• Close the door.
• Press the start button.
• Door is not fully closed.
• The start button is not pressed.
Streaks are left on
glassware.
• Fill the rinse-aid.
• Adjust the level of
rinse-aid container.
• Too little Rinse-Aid dispensed.
Dry results are not
satisfactory.
• Too little Rinse-Aid dispensed.
The spray arms do not
rotate smoothly.
• Clean the holes of the
spray arm.
• The mounting of the spray arms is
blocked by food particles.
Washing results are not
satisfactory.
• Incorrect amount of detergent.
• Utensils incorrectly arranged or
overloaded.
• Filters are clogged.
• Water jet holes of spray arms
blocked.
• Spray arm's rotation obstructed by
utensils.
• Unsuitable programme selected.
White deposits are left
on the dishwasher after
washing.
• Check the detergent
or rinse-aid.
• Check the salt
container or cap.
• The amount of detergent or rinse-
aid set incorrectly.
• The salt container is empty.
• The salt container cap is not
securely screwed on.
SolutionPossible Causes
Before calling for service