Owner's Manual
Connecting 15
Connecting
2
Stacking the speakers
You can listen to the best sound quality when you
stack the speakers. Refer to the below.
Before stacking
You have to position the unit and the speakers
before connecting the speakers. Note that the
illustrations below are dier from the actual unit.
Stacking the speakers
1. You install SWF(Subwoofer) SPK on a at surface.
(It is recommended that at least two people to
carry by left and right handle (C)).
2. As shown below, FRONT SPK place on
SWF(Subwoofer) SPK.
FRONT SPK
(C)
SWF(Subwoofer) SPK
3. FOOT (A) of FRONT SPK is mounted on the top of
the guide hole (B) of SWF(Subwoofer) SPK.
(A)
(B)
y
Install the speakers on a rm surface not to
slide.
y
If the speakers DON’T install on rm surface
or FOOT (A) of FRONT SPK is NOT mounted
appropriately on the top of the guide hole
(B) of SWF(Subwoofer) SPK, the vibration
caused by the strong output can shake and
move the speakers and make noise.
>
Caution
CM9940-FB_DINDLLK_ENG.indd 15 2014-05-22 �� 2:29:58