Owner's Manual

Operating 23
Operating
2
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold TIMER to set the alarm function.
3. Alarm sound sources will blink. While each of
sound sources blink, select the one you want by
pressing
I
ENTER or RDS/SET.
4. “ON TIME” will blink. This is your desired time to
turns unit on. Press
Y/U
to change the
hours and minutes and press
I
ENTER or RDS/
SET to save.
5. The “OFF TIME” will blink. This is your desired
time to turn unit off. Press
Y/U
to change
the hours and minutes and press
I
ENTER or
RDS/SET to save.
6. The volume setting will blink. Press
Y/U
to change the volume and press
I
ENTER or
RDS/SET to save.
7. Press TIMER to check the alarm information.
8. If you want to reset the clock, press and hold
TIMER.Then repeat step 3-6.
y
If you unplug the cord from an outlet, the
clock setting you set won’t be stored.
y
If you synchronize the unit with your BT
device for clock by using BT app, you can
set 12 - Hour Time (ex - PM 11 : 00) or 24 -
Hour Time (ex - 23 : 00).(Android O/S only)
y
If you set the clock, you can check the time
by pressing CLOCK although the player is
turned o.
y
If you set the clock and alarm, you can
check setting informaiton by pressing
TIMER although the unit is turned o. Then
this function will work in everyday.
y
Alarm function only works when the unit is
turned o.
y
When the alarm rings, you can deactivate
the alarm by pressing TIMER.
y
If the alarm rings with USB cable connected
to USB port, the function switches to tuner
function. (Depending on the type of device,
this may not be available.)
,
Note
Advanced Operation
Recording on USB
1. Connect the USB device to the unit.
2. Select a function by pressing FUNCTION on the
remote control or F on the unit.
One track/le recording - You can record a track/
a le on USB while playing the le you want.
All tracks/les recording - You can record tracks/
les on USB in stop state.
Program list recording - After making program
list, you can record it on USB.
(Refer to the page 17)
3. Start the recording by pressing USB REC on the
remote control.
4. To stop recording, press
I
ENTER.
Pausing recording
During recording, press USB REC to pause
recording. Press it again to restart recording. (Only
FM/ Portable function)
To select recording bit rate
and speed
1. Press USB REC for longer than 3 seconds.
2. Use
Y/U
to select the bit rate.
3. Press USB REC again to select the recording
speed.
4. Press
Y/U
to select a desired recording
speed. (CD Function Only)
X1 SPEED
- You can listen to music while recording it.
(Audio CD Only)
X2 SPEED
- You can just record the music file.
5. Press USB REC to finish the setting.
CM3330W-BG_DGBRLLK_ENG.indd 23 2013-02-19  12:19:15