Owner's Manual

Operating 17
Operating
2
Radio Operations
Antenna Connection
Connect the FM Wire antenna to FM ANTENNA
connector.
Connect the DAB antenna to the DAB ANT.
connector.
y
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep
it as horizontal as possible.
y
When the broadcasting signal is weak
: Check the condition of broadcasting
reception. ( check the QUALITY)
y
When moving the unit to other areas
: Delete all of the saved DAB scanned
stations.
,
Note
Listening to the radio
1. Press FUNCTION until FM/DAB appears in the
display window.
The last received station is tuned in.
2. [FM]
Auto tuning : Press and hold TUNING (-/+) for
about 2 seconds until the frequency indication
starts changing, then release. Scanning stops
when the unit tunes in a station.
Manual tuning : Press TUNING (-/+) repeatedly.
[DAB]
Press CH and press
d
/
M
when scanning stop.
3. Adjust the volume by pressing VOL (+/-).
Presetting the Radio Stations
You can preset 50 stations for FM/DAB . Before
tuning, make sure to turn down the volume.
1. Press FUNCTION until FM/DAB appears in the
display window.
2. [FM]
Select the desired frequency by pressing
TUNING (-/+).
[DAB]
Press CH and press
d
/
M
.
3. Press PROGRAM/MEMORY. A preset number
will blink in the display window.
4. Press PRESETFOLDER
W
/
S
to select the
preset number you want.
5. Press PROGRAM/MEMORY. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESETFOLDER
W
/
S
.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY for two
seconds. “ERASEALL” will blink on the display
window.
2. Press PROGRAM/MEMORY to erase all saved
radio stations.
Improving poor FM reception
Press
d
/
M
on the remote control. This will change
the tuner from stereo to mono. Then the reception
will be better than before.
CM2820-BM.DGBRLLK-6257-ENG.indd 17 2012-04-26  1:35:38