Owner's Manual

73
Others
Others
12
If a following message appears...
Message example Meaning / what to do
Overall operations
• Currently, the operation is prohibited.
This device will be powered off soon by
auto off function.
• Because “Auto Standby” is set to “On”, this unit will be powered off shortly.
Any operation will cancel the auto-standby function this time.
• If you wish to turn off the function, set “Settings” > “Others” >
“Auto Standby” to “Off”.
You cannot operate this during
dubbing.
• Because a dubbing is being performed, the operation is currently not
available.
Please insert the valid disc. • Although a timer recording to a disc will start shortly, a recordable disc is
not found in the unit. Check the disc.
Please connect valid USB-HDD. • Although a timer recording to a USB-HDD will start shortly, a recordable
USB-HDD is not found. Please check the USB-HDD.
Disc / USB device
Please eject the disc.
Playback feature may not be available
on this Disc.
• The disc may be unsupported or scratched and dirty. Remove the disc
and check the disc.
Region Error
Playback is not authorized in your
region.
• The region code of the disc does not correspond to this unit. Eject the
disc.
Abnormality occurred in USB
connection. USB device has been
stopped automatically.
• The USB device has a problem during playback / slide show or while
dubbing the contents. Disconnect the USB device.
Cannot find USB-HDD,
Or USB-HDD which cannot be
recorded in this device is connected.
• This unit cannot recognise the USB-HDD. Check the USB-HDD.
• Recognisable USB-HDD’s are from 64 GB to 4 TB.
Recording
It was not completed properly because
of an error.
• An error occurred and the recording was interrupted. It may be caused by
a malfunction of the HDD or scratches and dirt on the disc.
You cannot record because it is
prohibited to record.
• The programme is record-prohibited.
Cancel recording because of
insufficient capacity
• The recording was cancelled because the recording media became full.
The recording time exceeded 8 hours.
Recording was stopped.
• The maximum duration of one title is 8 hours.
Timer programming
Built-in HDD does not have enough
space to record. If space is not ensured
when you record, at the end of the
programme cannot be recorded.
Remaining capacity of disc is not
enough. If space is not ensured
when you record, a programme will
be recorded on HDD if the HDD has
enough space.
Remaining capacity of the USB-HDD
is not enough, If space is not ensured
when you record, a programme will
be recorded on HDD if the HDD has
enough space.
• There is not enough capacity on the HDD / USB-HDD / disc to complete
a recording. Press [
ENTER], then check the capacity of the recording
media.
Deletion / editing / dubbing
It was not completed properly because
of an error.
• The disc may be scratched or dirty. Press [
ENTER] to close the
message window, then eject the disc and check the disc.
The title is protected / This title is not
dubbed as this disc is protected.
• Cancel disc protection.
This title can be registered only once. • A title which will be dubbed as “move” can be registered to the dubbing list
only once.
Cannot add title. Limit exceeded. • The dubbing list is full.
• The maximum number of titles in the dubbing list is 36 titles.
Exceeds 8 hours • A title longer than 8 hours cannot be dubbed.
Disc is full. Cannot dub to this disc.
• The total data size of the dubbing titles exceeds the available capacity of
the dubbing media. Try to dub less titles or prepare a larger dubbing media.
Display panel
• ” ” and “UPDATE” indicate that this unit is downloading a software
update. Do not turn off the unit until an update is completed.
• ”
” may be displayed while organising the system data.
WAIT • This unit is in a process of system configuration and not operable. The unit
will become operable after the indicator disappears.