ENGLISH OWNER’S MANUAL AIR CONDITIONER Please read this manual carefully before operating your set and retain it for future reference. TYPE : FLOOR STANDING www.lg.
TIPS FOR SAVING ENERGY ENGLISH TIPS FOR SAVING ENERGY Here are some tips that will help you minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below: • Do not cool excessively indoors. This may be harmful for your health and may consume more electricity. • Block sunlight with blinds or curtains while you are operating the air conditioner.
IMPORTANT SAFETY INSTRUCTIONS 3 READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product ! WARNING It can result in serious injury or death when the directions are ignored ! CAUTION It can result in minor injury or product damage when the directions are ignored ! WARNING • Installation or repairs made by unqualified persons can result in hazards to you and others.
IMPORTANT SAFETY INSTRUCTIONS ENGLISH • Do not plug or unplug the power supply plug during operation. There is risk of fire or electric shock. • Do not touch(operate) the product with wet hands. There is risk of fire or electrical shock. • Do not place a heater or other appliances near the power cable. There is risk of fire and electric shock. • Do not allow water to run into electric parts. It may cause There is risk of fire, failure of the product, or electric shock.
IMPORTANT SAFETY INSTRUCTIONS 5 is risk of personal injury. • Do not step on or put anyting on the product. (outdoor units) There is risk of personal injury and failure of product. • Always insert the filter securely. Clean the filter every two weeks or more often if necessary. A dirty filter reduces the efficiency of the air conditioner and could cause product malfunction or damage. • Do not insert hands or other objects through the air inlet or outlet while the product is operated.
TABLE OF CONTENTS ENGLISH TABLE OF CONTENTS 2 3 TIPS FOR SAVING ENERGY 14 Simple Reservation 15 OPERATING INSTRUCTIONS (Heat pump model) IMPORTANT SAFETY INSTRUCTIONS 15 Cooling Mode 7 BEFORE USE 15 Heating Mode 7 Preparing for operation 15 Airflow Setting 7 Usage 15 Fan Speed Mode 7 Cleaning and maintenance 16 Dehumidification Mode 7 Service 16 Power Cooling/Heating Mode 8 PRODUCT INTRODUCTION 16 Fan Mode 16 Auto Operation Mode 16 Simple Reservation 17 Child Lock Op
BEFORE USE 7 Preparing for operation • Contact an installation specialist for installation. • Use a dedicated circuit. Usage • Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time. • Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or other heating devices. • Do not use this air conditioner for non-specified special purposes (e.
PRODUCT INTRODUCTION ENGLISH PRODUCT INTRODUCTION Specifications Air Outlet Vent Remote Signal Receptor Air Intake Vent (Rear) Air Intake Vent Air Outlet Vent
PRODUCT INTRODUCTION 9 ENGLISH Indoor Unit Controls and Indicators [Heat Pump] [Cooling Only] 6 8 17 7 10 13 14 15 JET COOL A/CL Fan Mode 5 4 3 ROOM SET 16 Fan Speed Temp. 11 6 9 7 10 12 2 Fan On/Off 5 1 14 15 A/CL JET COOL Temp. Mode 4 13 11 3 ROOM SET 16 Fan Speed On/Off 12 2 1 1. Start/Stop Button Operation starts when this button is pressed and stops when the button is pressed again. 10. Soft Dry Operation Lamp 2.
PRODUCT INTRODUCTION ENGLISH Wireless remote control (Cooling Only) No. 1 Control panel 1 2 5 3 4 6 7 8 9 10 11 12 13 2 Description Remote control operation lamp | Power ON/OFF button : Operation will start when this button is pressed, and stop when the button is pressed again. 3 Indoor fan speed button : To select the desired fan speed.
PRODUCT INTRODUCTION 11 ENGLISH Wireless remote controller (Heat Pump) No. 1 Control panel 1 2 5 3 4 6 7 8 9 10 11 12 13 2 Description Remote controller operation lamp | Power ON/OFF button : Operation will start when this button is pressed, and stop when the button is pressed again. 3 Indoor fan speed button : To select the desired fan speed.
PRODUCT INTRODUCTION ENGLISH Remote control preparation How to mount onto a wall 1 Use the screws to secure the holder to the wall or attach the holder side of indoor unit. 2 To insert the remote control to the holder. - Do not use rechargeable batteries such batteries are different from standard dry cells in shape, dimensions, and performance. - Change the batteries with a new one if the remote control does not work properly after using for an extended period of time.
OPERATING INSTRUCTIONS (Cooling only model) 13 Cooling Mode Airflow Setting 1 Press | button to turn on the indoor. We can simply adjust the desired airflow direction. 2 Press a button to select Cooling opera- tion mode. - When canceling operating, press | button once more. 3 Adjust the desired temperature by pressing ( ) buttons. - If desired temperature is higher than room temperature, cooling cannot be conducted.
OPERATING INSTRUCTIONS (Cooling only model) ENGLISH Dehumidification Mode In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and cooling mode to remove humidity effectively. - The temperature established by customer will be maintained through automatic performance of cooling operation in accordance with the change of room temperature. 1 Press | button to turn on the indoor.
OPERATING INSTRUCTIONS (Heat pump model) 15 Cooling Mode Airflow Setting 1 Press | button to turn on the indoor. We can simply adjust the desired airflow direction. 2 Press a button to select Cooling opera- tion mode. - When canceling operating, press | button once more. 3 Adjust the desired temperature by pressing ( ) buttons. - If desired temperature is higher than room temperature, cooling cannot be conducted. - Set the temperature lower than the room temperature - Setting Temp Range : 18°C~30°C.
OPERATING INSTRUCTIONS (Heat pump model) ENGLISH Dehumidification Mode In rainy season or high humidity climate, it is possible to operate simultaneously dehumidifier and cooling mode to remove humidity effectively. 1 Press | button to turn on the indoor. 2 Press c button to select dehumidification mode - Room temperature will be displayed after desired temperature is indicated at display section for about 5 seconds. Power Cooling/Heating Mode Strong cooling/heating will be conducted in short time.
OPERATING INSTRUCTIONS (Heat pump model) 17 ENGLISH Child Lock Operation Procedure 1 Press the fan speed and high temperature setting buttons simultaneously for 3 seconds. The unit will respond with beep. Fan Speed Temp. After 3 seconds, it will shifted. A/CL 2 JET COOL After 3 seconds, it will shifted.
MAINTENANCE AND SERVICE ENGLISH MAINTENANCE AND SERVICE ! CAUTION Before performing any maintenance, turn off the main power to the system. During the season Never use any of the followings. - Water hotter than 40°C. Could cause deformation and/or discoloration. - Volatile substances. Could damage the surfaces of the air conditioner. Cleaning of the air filters. Recommended about once every two weeks - Remove the Air Filter. Take hold of the tab and pull slightly forward to remove the filter.
MAINTENANCE AND SERVICE 19 ENGLISH Operation Tips Do not overcool the room. Keep blinds or curtains closed. This is not good for your health Do not let direct sunshine and wastes electricity. enter the room when the air conditioner is in operation. Keep the room temperature uniform. Adjust the vertical and horizontal airflow direction to ensure a uniform temperature in the room. Make sure that the doors and windows are shut tight.
MAINTENANCE AND SERVICE ENGLISH Troubleshooting Check the following points before requesting repairs or service.... If the malfunction persist, please contact your dealer. Case Does not operate. Explanation See page • Have you made a mistake in timer operation? • Has the fuse blown or has the circuit breaker been tripped? • Is the power Switch at Off? • Is the unit at the starting of Heating Operation? If yes, Hot-start is activating.
