Owner's Manual

onnecting Drain Hose

Installation

Before connecting Drain Hose, åcheck your Drain Hose model and choose the correct

instructions.

Fit the end of the drain hose to the outlet of the

drain pump and tighten the clamp.

Put the other end of the drain hose over the

standpipe or wash tub.

Pump Model

• To prevent siphoning, the drain hose should not extend more than 50 mm from the end of the hose guide.

• The discharge height should be approximately 0.9 ~ 1.2 m from the floor.

Hose

Guide

Within 50mm

Drain Hose

0.9~1.2m

Non-Pump Model

Before connecting

Ensure that the hose clip is set as indicated here.

Connect the Elbow Hose

Push the elbow hose toward the body of the

washing machine.

Place the Drain Hose

To change the direction of the hose, pull out the

elbow hose and change the direction.

Repeat Step 2.

Clip

NOTE