Operation Manual

10
ENG
ENGLISH
ASSEMBLING AND PREPARING
NOTE
y
The items supplied with your product may vary depending on the model.
y
Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
How to use the ferrite core
- If there are two ferrite cores, follow as shown in Figures 1-2 and 2-1(or 2-2).
- If there are three ferrite cores, follow as shown in Figures 1-1 and 2-1(or 2-2).
1 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
[to a wall plug]
[to the TV]
[Figure 1-1]
[Cross Section of
Ferrite Core]
(Black)
2 Use the ferrite core to reduce the electromagnetic interference in the component Y, Pb, Pr, L,
R cable & AV cable.
Wind the component Y, Pb, Pr, L, R cable & AV cable on the ferrite
core once. Place the ferrite core close to the TV.
[to an External device]
[Figure 2-1]
[to the TV]
10 mm(+ / - 5 mm)
Wind the PC audio cable on the ferrite core once.
[Cross Section of
Ferrite Core]
(Black)
[to an External device]
[to the TV]
10 mm(+ / - 5 mm)
[Figure 2-2]
y For an optimal connection, HDMI cables and USB
devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that sup-
ports USB 2.0 if the USB cable or USB memory stick
does not fit into your TV’s USB port.
*A 10 mm
*B 18 mm
[to a wall plug]
[Figure 1-2]
[to the TV]