Owner’s Manual

Setting Description
Edge Enhancer Shows clearer and distinctive yet natural edges of the video.
This function works well over Sharpness UI 60 value.
xvYCC This is produces richer colors.
This feature represents rich colors as much as a conventional video signal.
This function is enabled in “
Picture mode
-
Cinema
,
Expert
” when
xvYCC
signal is inputted
through HDMI.
Color Filter This is the function to filter the specific colors of the video.
You can use the RGB filter to set color saturation and hue accurately.
Expert Pattern This is the pattern used for expert adjustment
This function is enabled in “
Picture Mode
-
Expert
” when you watch DTV.
Color Temperature Adjusts the overall color of the screen by changing the white baseline.
Plasma
a. Method : 2 Points

Pattern: Inner, Outer

Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjustment range is -50
to +50.
b. Method : 20 Point IRE

IRE (Institute of Radio Engineers) is the unit to display the size of the video signal
and can be set among 0, 5, 10, 15 - 100 Plasma TV. You can adjust Red, Green or
Blue according to each setting.

Red/Green/Blue: The adjustment range is -50 - +50.
c. Apply to all inputs
LCD
a. Gamma : Select 1.9, 2.2, 2.4
b. Method : 2 Points

Pattern: Inner, Outer

Red/Green/Blue Contrast, Red/Green/Blue Brightness
c. Method : 10 Point IRE

Pattern: Inner, Outer

IRE (Institute of Radio Engineers) is the unit to display the size of the video
signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue
according to each setting.

Luminance: This function displays calculated luminance value for 2.2 gamma. You
can input luminance value you want at 100 IRE, than the target luminance value
for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.

Red/Green/Blue: The adjustment range is -50 - +50.
d. Apply to all inputs
Color Management
System
As the tool used by the experts to make adjustments by using the test patterns, this does
not affect other colors but can be used to selectively adjust the 6 color areas (Red/Green/
Blue/Cyan/Magenta/Yellow).
Color difference may not be distinctive even when you make the adjustments for the general
video.
Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.

»
Red/Green/Blue/Yellow/Cyan/Magenta Color: The adjustment range is -30 - +30.

»
Red/Green/Blue/Yellow/Cyan/Magenta Tint: The adjustment range is -30 - +30.

»
This feature is disable in RGB-PC and HDMI-PC mode.
92
ENG
ENGLISH
CUSTOMIZING SETTINGS