User Guide This is a 「User Guide」 installed on TV. The contents of this guide are subject to change without prior notice for quality improvement.
❐❐To view program information Wheel(OK) ➾ Info. Displays information on current program and/or current time, etc. ✎✎ Image shown may differ from your TV. Current time Sat, Jan.1 12:02 AM PM 2:00 PM 4:30 Program name or external device name Prev./Next Ch.
❐❐To set favorite channels HOME ➾ Settings ➙ SETUP ➙ Channel Edit 1 2 3 4 Move to the desired channel on Wheel(OK) button. Channel is selected. Press Set as Favorite. Select the desired favorite channel group. Select Enter. Favorite is set. ❐❐To use Favorite HOME ➾ Ch. List Channel list will appear. Select the desired preset favorite channel from Favorite List A to D.
HOME ➾ Program Guide [In Digital Mode Only] Obtains information about programs and airtime. Obtains program information and viewing/recording schedules. [Image shown may differ from your TV.] Program Guide ALL Today 1/2 page Aug. 10, 2011 7:00 AM Press Wheel(OK) button after moving to the desired program to view or view/record programs. -24H +24H Select schedule by date Schedule List FAV Favorite Ch. Group After viewing the schedule, makes revisions or deletions.
❐❐To set Auto Tuning HOME ➾ Settings ➙ SETUP ➙ Auto Tuning Automatically tunes the channels. ✎✎ Channels are not registered properly unless the antenna/cable is connected correctly. ✎✎ Auto Tuning only sets channels that are currently broadcasting. ✎✎ If Lock System is turned on, a pop-up window will appear asking for password.
❐❐To set channels manually HOME ➾ Settings ➙ SETUP ➙ Manual Tuning Adjusts channels manually and saves the results. For digital broadcasting, signal strength, etc. can be checked.
❐❐To edit channels HOME ➾ Settings ➙ SETUP ➙ Channel Edit Edits the saved channels. Set as favorite, block/unblock and skip etc. the selected channel.
HOME ➾ Settings ➙ PICTURE ➙ Aspect Ratio Selects the screen aspect ratio. 16:9 Just Scan Original Resizes the image ratio to fit 16:9 screen. Displays high-quality image without loss. ✎✎ In DTV/HDMI/Component (over 720p) mode, Just Scan is available. ✎✎ In DTV(over 576p) mode, Just Scan is available in Australia only. When your TV receives a wide screen signal it will automatically change to the picture format broadcasted.
Full Wide 4:3 14:9 Zoom Cinema Zoom When TV receives the wide screen signal, it will let you adjust the picture horizontally or vertically, in a linear proportion,to fill the entire screen fully. 4:3 and 14:9 video is supported in full screen without any video distortion through DTV input. ✎✎ In DTV mode, Full Wide is available. Resizes the image ratio to fit 4:3 screen. You can view a picture format of 14:9 or a general TV program in the 14:9 mode.
✎✎ While viewing an external device, these cases may result in image burn: - a video with stationary caption (such as network name) - 4:3 aspect ratio mode for an extended period Take caution when using these functions. ✎✎ Available picture size may differ depending on the input signal. ✎✎ The screen aspect ratios on HDMI/RGB-PC input are available in 4:3 and 16:9 only.
❐❐To adjust pictures in PC input mode HOME ➾ Settings ➙ PICTURE ➙ Screen Adjusts picture in RGB-PC mode. Resolution Auto Config. Sets the desired resolution. ✎✎ Resolution may only be selected when the PC resolution is set to 1024x768, 1280x768 or 1360x768. Optimizes picture. Position/Size/ If screen size or location is distorted, user can directly adjust Phase the screen size and position. Reset Resets all the changes on picture settings on PC input mode.
❐❐To set PC resolution 1 Right-click on the desktop of PC and select 「Properties」. 2 Click on 「Settings」 and refer to supported formats to set the resolution. 3 Select 「Advanced → Monitor → Monitor Settings」 on the setting window. Refer to supported formats to select the optimal vertical frequency. ✎✎ On PC mode, 1920x1080 resolution delivers the optimum picture quality. ✎✎ Resolution settings differ depending on the type of PC.
❌❌Formats Supported PC Input Mode HDMI-PC / RGB-PC HDMI-PC Resolution 640x350 720x400 640x480 800x600 1024x768 1152x864 1360x768 1920x1080 1280x1024 Horizontal Frequency (KHz) 31.468 31.469 31.469 37.879 48.363 54.348 47.712 67.5 63.981 Vertical Frequency (Hz) 70.09 70.08 59.94 60.31 60.00 60.053 60.015 60.00 60.
HOME ➾ Quick Menu ➙ AV Mode Views the TV with the best picture / audio optimized for different AV modes. Off Views with the value set at the picture / sound menu. Cinema / ꔧ Cinema Optimizes picture and audio settings for movies. Game Optimizes picture and audio settings for games. ✎✎ ꔧ [Depending on model] THX (Thomlinson Holman’s Experiment) is an audio and video certification standard established by George Lucas and Thomlinson.
❐❐To adjust pictures with Picture Wizard HOME ➾ Settings ➙ PICTURE ➙ Picture Wizard Ⅱ Use the remote control and follow the instructions of the Picture Wizard to calibrate and adjust for the optimum picture quality without expensive pattern devices or help from a specialist. Follow the instructions to obtain the optimum picture quality.
❐❐To select Picture Mode HOME ➾ Settings ➙ PICTURE ➙ Picture Mode Selects the picture mode optimized for the viewing environment or the program. Intelligent Sensor Vivid Standard Detects the ambient illumination and automatically adjusts TV's brightness level to reduce power consumption. Automatically adjusts the brightness, sharpness, color or tint for optimum picture quality. Heightens contrast, brightness, and sharpness to display vivid images.
Cinema/ ꔧ Cinema Displays images that have been optimized for movies or Game games. [ꔧ Cinema : Depending on model] ꕋ Expert Menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This menu is ISF-certified and provided for picture tuning experts. (ISF logo can only be used on ISF-certified TV units.) ISFccc: Imaging Science Foundation Certified Calibration Control ✎✎ Depending on the input signal, available range of picture modes may differ.
❐❐To fine-tune picture mode HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Backlight/Contrast/ Brightness/Sharpness/Color/Tint/Color Temp. Selects the desired Picture Mode first. Backlight Adjusts the display brightness by varying the brightness of the LCD panel. Contrast Adjusts the difference between bright and dark regions of the screen. Brightness Adjusts the overall screen brightness. Sharpness Adjusts the sharpness of the borders between bright and dark.
Tint Color Temp. Adjusts the red/green color balance. Adjusts the overall tone of colors to hot or cool. ✎✎ Depending on the input signal or other picture settings, the range of detailed items for adjustment may differ.
❐❐To set advanced control HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Advanced control/ Expert Control For each picture mode, screen can be calibrated; or for a special screen, picture settings can be adjusted. Selects the desired Picture Mode first. Dynamic Contrast Adjusts the contrast to the optimal level according to the image's brightness. Dynamic Color Adjusts colors to make the image appear in more natural colors. Clear White Enhances whites on screen to make the image brighter and sharper.
Skin Color : Skin color spectrum can be separately set to implement the skin color defined by the user. Preferred Color Grass Color : Natural color spectrum (meadows, hills, etc.) can be separately set. Sky Color : Sky color is set separately. Super Resolution Provides a crystal-clear picture by improving the details in an area that has a blurry or unclear picture. Gamma Sets the gradation curve according to the output of picture signal in relation to the input signal.
Color Filter Filters a specific color spectrum in RGB colors to fine-tune color saturation and hue accurately. Expert Pattern Patterns used for expert adjustment. White Balance Adjusts the overall tone of the screen as desired. In Expert mode, detailed fine-tuning can be set via Method / Pattern and the like. Color Management System This is a function used by experts when they adjust colors with test pattern of six colors (Red/Green/Blue/Cyan/ Magenta/Yellow) without affecting other color areas.
❐❐To set additional picture options HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option Adjusts detailed setting for images Noise Reduction Reduces screen noise in the video. MPEG Noise Reduction Reduces noise caused by compressing digital video. Black Level Adjusts the brightness or darkness of the screen to fit the black level of the picture input using the screen's degree of darkness (black level). Real Cinema Optimizes the screen for movie viewing.
❐❐To reset Picture Mode HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Reset Resets the values customized by the user. Each picture mode is reset. Select the desired picture mode.
HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option ➙ TruMotion Corrects images to display smoother motion sequences. Smooth De-Judder/De-Blur value is set at 3. Clear De-Judder/De-Blur value is set at 7. Clear Plus User The screen appears clearer when Clear is selected. ✎✎ Clear Plus cannot be selected in 3D mode. De-Judder/De-Blur can be set manually. • De-Judder : This function adjusts juddering of the screen. • De-Blur : This function adjusts and eliminates blurring of the screen.
HOME ➾ Settings ➙ PICTURE ➙ Picture Mode ➙ Picture Option ➙ LED Local Dimming Brightens bright areas and darkens dark areas of the image for maximum contrast and minimum blur while reducing power consumption. Off Low Medium High Turns off LED Local Dimming. Expresses in natural black tones. Use this setting for viewing movies. Deepens black tones than Low. Use this setting for regular TV viewing. Deepens black tones and delivers clearer image than Medium. Perfect for viewing in brightly lit areas.
❐❐To use Sound Mode HOME ➾ Settings ➙ SOUND ➙ Sound Mode Optimizes TV audio to the selected sound mode. Standard Suitable for all types of video Music/Cinema/Sport/ Sets audio optimized for a specific genre. Game Vivid User Setting Delivers distinct voices with rich bass and clear, high-pitched sounds. Adjusts the volume to the desired level using the User EQ.
❐❐To fine-tune the volume HOME ➾ Settings ➙ SOUND ➙ User EQ Sets Sound Mode at User Setting first. 100 Hz / 300 Hz / 1 kHz/ 3 kHz / 10 kHz Reset Sets EQ by manually adjusting sound bands. Resets previously changed equalizer value.
❐❐To set Volume Mode HOME ➾ Settings ➙ SOUND ➙ Volume Mode Sets various modes for volume control. Auto Volume Sets Auto Volume to On. Different volume outputs from channel to channel. They are then automatically adjusted for convenient TV watching when, clicking through different channels. Volume Control Using a single volume curve may result in an inaudible or loud sound depending on the environment. This function adjusts comfortable volume levels depending on day/night.
❐❐To use Sound Optimizer function HOME ➾ Settings ➙ SOUND ➙ Sound Optimizer Allows optimized sound for individual TV installation. Normal Wall Mount Type Stand Type General sound mode Optimizes sound for a wall-mounted TV. Optimizes sound for a stand-mounted TV.
❐❐To use Virtual Surround feature HOME ➾ Settings ➙ SOUND ➙ Virtual Surround LG's proprietary audio processing technology allows 5.1ch-like surround sound from two speakers. ✎✎ When Clear Voice II is set to On, Virtual Surround cannot be selected. ❐❐To use Clear Voice II feature HOME ➾ Settings ➙ SOUND ➙ Clear Voice II Boosts voice clarity.
❐❐To set AV Sync HOME ➾ Settings ➙ SOUND ➙ AV Sync. Synchronizes unmatched video and audio. Select AV Sync. to On to synchronize audio output (TV speaker or SPDIF) with the video. TV Speaker Adjusts the sync of the sound from the TV's internal speakers. The "-" button makes the sound output faster and the "+" button slower than the default value. SPDIF (Sony Philips Digital InterFace) Adjusts the sync of the sound from speakers connected to digital audio out terminal.
Bypass Outputs broadcasting signals or the audio of an external device without audio delay. Audio may be output before video as it takes time to process video input into the TV. ❐❐To use ARC mode HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ ARC Mode External audio devices that support Audio Return Channel (ARC) can be connected with High-Speed HDMIⓇ cable without an extra optical audio cable to output SPDIF. It interfaces with SIMPLINK.
Off On Even when the connected ARC-supported external audio device is turned on, audio output is not processed through the external audio device’s speakers. When an ARC-supported external audio device is turned on, audio output is automatically processed through the external audio device’s speakers. SIMPLINK must be turned on. For SIMPLINK, refer to 「General → To use input device」. ✎✎ Connect to ARC-only terminal when connecting to external devices.
❐❐To adjust audio balance HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ Balance Adjusts left/right audio balance.
❐❐To use TV's speakers HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ TV Speaker When listening to the speakers on the external audio devices connected to TV, such as home theater, TV speaker may be turned off. When there are SIMPLINK connected home theater devices, selecting TV Speaker to OFF will automatically turn on home theater. Off There is no sound from the TV speakers. Delivers TV sound through external audio device speakers connected to the TV.
❐❐To use Digital Sound Out HOME ➾ Settings ➙ SOUND ➙ Sound Setting ➙ Digital Sound Out Sets up Digital Sound Output.
❐❐DTV Sound Setting HOME ➾ Settings ➙ SOUND ➙ DTV Sound Setting [Depending on model] When different audio types exist in an input signal, this function allows you to select the audio type you want. If set to AUTO the search order is HE-AAC → Dolby Digital+ → Dolby Digital → MPEG and output is produced in the first Audio Format found. ✎✎ In Italy only, the order is HE-AAC → Dolby Digital+ → MPEG → Dolby Digital. ✎✎ In New Zealand only, the order is Dolby Digital+ → Dolby Digital → HE-AAC → MPEG.
❐❐To select external input HOME ➾ Input List Selects external input. INPUT LIST Selects speaker. TV Speaker Selects input. TV AV Component HDMI1 HDMI2 HDMI3 Change Device Name SimpLink Setting Sets SIMPLINK. Edits the name of external device connected to external terminal.
❐❐To use SIMPLINK SIMPLINK allows users to control and manage multiple multimedia devices using the convenient TV remote control and SIMPLINK menu. 1 Connect the TV's HDMI IN terminal with SIMPLINK device's HDMI output terminal using HDMI cable. For home theater units with SIMPLINK function, connect HDMI terminals as above and use an optical cable to connect Optical Digital Audio Out from the TV to Optical Digital Audio In of the SIMPLINK device. 2 Select HOME ➾ SIMPLINK. SIMPLINK menu window appears.
✎✎ This function works only on devices with the SIMPLINK logo ( Make sure that the external device has a SIMPLINK logo. ). ✎✎ To use SIMPLINK function, use a high-speed HDMIⓇ cable (with CEC, or Consumer Electronics Control feature added) and No. 13 pin connected for information exchange between devices. ✎✎ Turn on or select the media of a device with home theater features to see the speaker switch to HT Speaker. ✎✎ Connect with an Optical cable (sold separately) to use HT Speaker.
❌❌Explanation on SIMPLINK features Direct Play Select multimedia device. Disc playback Power off all devices Play the multimedia device on the TV instantly without extra steps. Select the desired device through the SIMPLINK menu and instantly control it from the TV screen. Manage the multimedia device with the TV remote control. Turning the TV off with Auto Power function On in SIMPLINK setting will turn the power off on all SIMPLINKconnected devices.
Sync Power on Speaker If the Auto Power function is set to On in the SIMPLINK settings, turning on a SIMPLINK device will turn the TV on. Selects speaker on the home theater unit or TV.
HOME ➾ Settings ➙ PICTURE ➙ Energy Saving Reduces power consumption by adjusting screen brightness. Auto Off Minimum/ Medium/ Maximum Screen Off TV sensor detects the ambient lighting and automatically adjusts the screen brightness. • Min. Luminance : Select the minimum brightness for the screen under low ambient light. • Sensing Strength : Select the TV's range of brightness in the viewing environment. Turns off the Energy Saving mode. Applies the pre-set Energy Saving mode.
❐❐To use Sleep Timer HOME ➾ Settings ➙ TIME ➙ Sleep Timer Turns off the TV after a prescribed number of minutes. To cancel the Sleep Timer, select Off.
❐❐To set current time HOME ➾ Settings ➙ TIME ➙ Clock Checks or changes the time while watching TV. Auto Manual Synchronizes the TV clock to the digital time information sent by the TV station. Sets the time and date manually if the auto setup does not correspond to the current time.
❐❐To set the TV to turn on and off automatically HOME ➾ Settings ➙ TIME ➙ On Time/Off Time Sets On/Off time. Select Off on Repeat to discontinue On Time/Off Time. ✎✎ To use On Time/Off Time, set the current time correctly. ✎✎ Even when the On Time function is on, the TV will turn off automatically in 120 minutes when no button is pressed within that time.
❐❐To set password HOME ➾ Settings ➙ LOCK ➙ Set Password Sets or changes TV password. ✎✎ The initial password is set as 「0000」.
❐❐To lock system HOME ➾ Settings ➙ LOCK ➙ Lock System Permits only specific programs by blocking channels or external input. Select the Lock System to On. Block Channel Input Block Blocks specific channels that are harmful to children. ✎✎ To access the locked channel, enter user password. Blocks the selected input.
HOME ➾ Settings ➙ OPTION ➙ Language Selects Menu Language and Audio Language displayed on the screen. Menu Language Audio Language Subtitle Language Voice Search Language Selects a language for the display text. [In Digital Mode Only] When watching a digital broadcast containing several audio languages, you can select the language you want. [In Digital mode Only] Use the Subtitle function when two or more subtitle languages are broadcast.
❐❐To set Hard of Hearing HOME ➾ Settings ➙ OPTION ➙ Hard of Hearing This function is used for the hearing impaired. If it is set to on, the subtitle is displayed by default.
❐❐To register the Magic Remote Control To use the Magic Remote Control, register it with your TV first. Register Magic Remote Control as follows: 1 Turn on the TV and wait for about 10 seconds and then press Wheel(OK) button while pointing the remote control at the TV. 2 The remote control is automatically registered and a registration completion message appears on the TV screen. ✎✎ If you failed to register the Magic Remote Control, turn off the TV and try again.
❐❐To re-register the Magic Remote Control 1 Press the HOME and 返回 buttons at the same time for about 5 seconds. 2 Point the remote control at the TV and press Wheel(OK) button for about 5 seconds. ✎✎ Press the BACK button while pointing the remote control at the TV for five seconds to reset and re-register it.
❐❐To set the pointer of the Magic Remote Control HOME ➾ Settings ➙ OPTION ➙ Pointer Sets the speed and shape of the pointer that appears on the TV screen. Speed Sets the moving speed of the pointer. Shape Chooses from different shapes of the pointer. Size Chooses the size of the pointer. Set it to On. If there is any misalignment between the pointer and the actual direction the remote control indicates, move the Alignment Magic Remote Control left and right to realign.
✎✎ If the pointer has not been used for a certain period of time, it will disappear. When the pointer disappears from the screen, shake the Magic Remote Control to the right and left. Then, it appears again. ✎✎ If you press the navigation button while moving the pointer on the screen, the pointer disappears, and the Magic remote control works as a regular remote control. ✎✎ Use within an effective distance of 33 ft. (10 meters).
✎✎ Electronic devices nearby may cause communication interference. Devices such as microwave oven and wireless LAN use the same frequency range (2.4 GHz) as the Magic Remote Control, which may interfere with the remote control. ✎✎ The Magic Remote Control may be broken if dropped or damaged in any other way. ✎✎ Do not drop or subject the Magic Remote Control to heavy impacts.
❐❐To use the pattern gesture function Press the Wheel(OK) button with the normal video screen on and draw a pattern toward the screen. Previous channel: Moves back to the previous channel. Recent list: Shows channels recently watched. ✎✎ It may not work when certain windows are open.
❐❐To set Power Indicator HOME ➾ Settings ➙ OPTION ➙ Standby Light Turns on/off the standby light in the front panel of the TV. ❐❐To change TV mode HOME ➾ Settings ➙ OPTION ➙ Mode Setting Selects Home Use or Store Demo. For use in the home, select Home Use. Store Demo is for store display.
❐❐To return to initial settings HOME ➾ Settings ➙ OPTION ➙ Factory Reset Returns to initial default mode by deleting all optional setup. Once initialization is completed, the TV will turn off and on by itself. ✎✎ If Lock System is turned on, a pop-up will be prompted to ask for password. ✎✎ Do not turn off the power during initialization.
❐❐To use Home Screen Press HOME button on the remote control. Thanks to the Smart TV’s design with functions in one screen, users have convenient access to a wealth of Content and applications via the easy-to-use menu arranged by themes (Live TV, Card, My Apps). Sign in Premium Cinema Weather More... News 11-1 MBC HD More...
❐❐To use and edit MY CARD HOME ➾ MY CARD To enable you to easily check and access a wide variety of content and functions, the main functions are grouped into categories and displayed on cards. By selecting the card name, you can go to that category page. Select Edit at the top of the home screen to switch the position of the cards or create your own card. (You cannot edit the Live and Premium cards.
❐❐To use My Apps HOME ➾ My Apps Select My Apps at the bottom of the home screen or press the MY APPS button on the remote control. Select My Apps to check apps pre-installed apps and apps you have downloaded. My Apps Input List Settings Search Internet LG Smart... Program Guide Media Link Select the desired app to run.
❐❐To❐edit❐items❐in❐My❐Apps HOME❐➾❐My❐Apps❐➙❐Edit On the My Apps page, select Edit at the top of the screen to move or delete apps. Please note that system apps can be moved, but cannot be deleted. ✎ Changes orders/Deletes items by dragging the app icons on models equipped with Magic Remote Control.
❐❐To manage LG Smart TV Setting HOME ➾ Settings ➙ OPTION ➙ Smart TV Setting Sets many Smart TV-related settings and manages IDs. Changes Country Setting on the Smart TV. Smart TV Country Receives Premium service and LG Smart World of the desired country. Premium Version Displays Premium service version. ID List Checks and delete IDs signed in to TV. Reset Deletes all registered ID information from TV. Legal Notice Shows Legal Notice for Smart TV.
A wireless or wired network connection is necessary to use Smart features. Once the network connection is established, Premium Content, LG Smart World, DLNA, and more are available. ❐❐Network connection by one-click It’s easy to connect to a wired/wireless network. Select HOME ➾ Settings ➙ NETWORK ➙ Network Connection to be automatically connected to an available network. Refer to prompts on the TV.
❐❐To connect network through Set Expert HOME ➾ Settings ➙ NETWORK ➙ Network Connection Used in special circumstances such as in offices (in case where static IP is used). 1 Select a network connection either through Wired or Wireless. 2 When connecting via Wi-Fi, use the one of the following network connection methods. AP List Enter the SSID WPS-PBC Connects the network by selecting a network from the AP List. Connects by typing in the name of wireless AP.
WPS-PIN Ad-hoc Connects easily by typing in the PIN on the web site of the desired wireless AP. Connects to the network via a wireless-enabled PC or mobile phone.
❐❐To use Wi-Fi Screen function HOME ➾ Settings ➙ NETWORK ➙ Wi-Fi Screen Share Allows use of wireless connection functions such as Wi-Fi Direct and WiDi. Shares screen of devices connected via Wi-Fi Screen Share in Smart Share. 1 Set Wi-Fi Screen Share to On. (If you do not use it, please change it to Off.) 2 Enable the Wi-Fi Direct settings on the device that you want to connect to. 3 A list of devices that can be connected to the TV is displayed. 4 Select a device to connect.
❐❐Warning when setting network ✎✎ Use standard LAN cable (connect to Cat5 or higher with RJ45 connector, 10 Base-T, or 100 Base TX LAN port). ✎✎ Resetting modem may cause network connection problems. Turn the power OFF, disconnect and reconnect it, and then turn the power on to solve the problem. ✎✎ LG Electronics is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.
✎✎ DSL service must use the DSL modem; and cable service must use the cable modem. Since only a limited number of network connections may be available, TV network setting may not be used depending on the contract with Internet service provider. (If the contract does not allow more than one device per line, only the already-connected PC may be used.) ✎✎ Wireless network can experience interference from other devices with 2.4 GHz frequency (wireless phone, Bluetooth device, or microwave oven).
✎✎ The access point device must support wireless connection and wireless connection feature must be enabled on the device to have AP connection. Contact the service provider for availability of wireless connection on the access point. ✎✎ Check SSID and security settings of the AP for AP connection. Refer to the appropriate documentation for SSID and security settings of the AP. ✎✎ Invalid settings of network devices (wired/wireless line sharer, hub) can cause TV to operate slowly or not operate properly.
❐❐To use Smart Share™ HOME ➾ Smart Share Provides photo/music/video files on TV by connecting a USB or home network (DLNA, Media Link). SMART SHARE Contents Typ e More.... Recently Watched More.... e Newly Added More.... Linked Devic More.... ALL VIDEO MUSIC PHOTO RECORDED TV Settings Connecting Guide Displays photo/music/video files on all devices connected to TV.
❐❐To control movie play Controls play and sets options while viewing movies. Selects the desired point and plays. Option Plays Stops playback and returns to the list. List Sets options. Changes to 3D mode.
❐❐To control photo view Controls playback and sets options while viewing pictures in full screen. ✎✎ For 3D pictures, the Slide Show Effect does not work even when the Slideshow function is enabled. Slideshow BGM Displays photos as a slideshow. Plays background music. Rotates or enlarges the picture. Option List Stops playback and returns to the list. Sets options. Changes to 3D mode.
❐❐To control music play Controls play and sets options while playing music. Selects the desired point and plays. Option Plays List Sets options. Returns to the list.
❐❐To set Smart Share™ related functions HOME ➾ Smart Share ➙ Settings Changes settings related to Smart Share content play. ❌❌Advanced Setting TV Name Changes the name that appears when searching for the TV from other devices. Network Status Checks the network connection. Wi-Fi Screen Share Share My TV Allows use of wireless connection functions such as Wi-Fi direct and WiDi. Allows/Disallows connecting to TV from other devices. Turns on/off DMR (Digital Media Renderer) connection.
Auto Play on Receipt DivX VOD Accepts/Rejects Content transferred from other devices. Registers or releases DivX. Checks DivX Registration Code for playing DivX-protected videos. Register at http://vod.divx.com. Uses Registration Code to rent or purchase movies at www. divx.com/vod. ✎✎ When using the DivX Registration Code of another device, the rented/purchased DivX file cannot be played. Use only the DivX Registration Code granted to this device.
❌❌History To delete contents history, press button below. Use the contents at Contents Type and Linked device menu. ❌❌Privacy Check the device that you do not want to open at Newly Added and Recently Watched menu.
❐❐Smart Share™ supporting file Maximum data transfer rate : 20 Mbps (Mega bit per second) External supported subtitle formats : *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.
❌❌Video Supported Codec Maximum: 1920 x 1080 @30p Extension .asf .wmv .divx .avi .mp4 .m4v .mov Video Audio Video Audio Video Audio Codec VC-1 Advanced Profile, VC-1 Simple and Main Profile WMA Standard, WMA 9 Professional DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Motion Jpeg MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, Dolby Digital Plus, LPCM, ADPCM, DTS H.
Extension .mkv .ts .trp .tp .vob .mpg .mpeg Video Audio Video Codec Video Audio H.264/AVC HE-AAC, Dolby Digital H.
❌❌Available music file File type mp3 Item Info Bit rate 32 Kbps - 320 Kbps Sample freq.
❌❌Available photo file File type Item Profile baseline Available file SOF0: SOF1: Extend Sequential type SOF2: Progressive 2D(jpeg, jpg, jpe) Minimum: 64 x 64 3D(jps) Photo size Maximum: Normal Type: 15360 (W) x 8640 (H) Progressive Type: 1920 (W) x 1440 (H) Available file mpo type 4:3 size: 3D (mpo) Photo size 3648 x 2736, 2592 x 1944, 2048 x 1536 3:2 size: 3648 x 2432
❐❐Caution for playing video ✎✎ Some subtitles created by users may not work properly. ✎✎ The video and subtitle files should be placed in the same folder. In this case, you must assign the same names for the video and subtitle files for proper display. ✎✎ We do not support any stream that contains GMC (Global Motion Compensation) or Qpel (Quarterpel Motion Estimation). ✎✎ Only H.264/AVC profile level 4.1 and lower is supported. ✎✎ The file size limit is dependent on the encoding environment.
✎✎ Video files created by some encoders may not be played back. ✎✎ Video files in formats other than the ones specified here may not be played back. ✎✎ Playback of video files stored on the USB device that do not support High Speed, may not work properly. ✎✎ The TV supports DTS audio codec when the USB video file playback.
DLNA stands for Digital Living Network Alliance, which allows users to access video/music/photo files stored in a PC or server and enjoy them on TV via home networking. ❐❐To connect DLNA-authenticated Smartphone TV and the smartphone should be on the same network. 1 Enable Wi-Fi on the smartphone. 2 Install/run the app to share content on the smartphone. 3 Run “Share my mobile phone Content”. 4 Select the kind of Content (video/audio/photo) to play. 5 Select the video, music, or photo file to play on TV.
❐❐To connect DLNA DMR (Digital Media Renderer) With Windows 7 PC operating system or DLNA-certified device (e.g. mobile phone), music/videos/photos may be played on the TV without installing a separate program 1 Configure the TV and PC on the same network. Configure Windows 7-installed PC on the network. 2 To replay a music/video/photo file, right-click on the file and use the “Remote Playback” Windows 7 feature. For playback on devices like a mobile phone, refer to the model’s user guide.
❐❐To connect DLNA DMP (Digital Media Player) With a PC having Nero MediaHome 4 Essentials, music/video/photo files may be replayed on the TV by linking them via home networking. 1 Configure TV and PC on the same network. TV and each device should be connected through a single access point to enable DLNA and Media Link service. 2 Install Nero MediaHome 4 on PC from the web site (http://www.lg.com). Before installation, close all running programs including firewall and AntiVirus programs.
3 Indicate files/folders to share through Nero MediaHome 4 Essentials installed on PC. 1. Run "Nero MediaHome 4 Essentials" installed on PC. 2. Select folder items to share. 3. Configure the shared folder and click "Start Server." Server starts. ✎✎ If the shared folder does not appear on TV, click the Local Folder tab and search again. ✎✎ For more information and software-related information, refer to the web site http://www.nero.com.
❌❌PC requirements for installing Nero MediaHome 4 Essentials program: • WindowsⓇ XP (Service pack 2 or later), Windows VistaⓇ, WindowsⓇ XP Media Center Edition 2005 (Service pack 2 or later), Windows ServerⓇ 2003 (Service pack 1 or later) • WindowsⓇ 7 Home Premium, Professional, Enterprise or Ultimate (32- and 64-bit) • Windows VistaⓇ 64-bit version (application runs in 32-bit mode) • WindowsⓇ 7 64-bit version (application runs in 32-bit mode) • Hard drive space: more than 200 MB
• CPU: 1.2 GHz IntelⓇ PentiumⓇ III or AMD Sempron™ 2200+ processor • Memory: more than 256 MB RAM • Graphic card: more than 32 MB, resolution of at least 800 x 600 pixels and at least 16-bit color settings supported • WindowsⓇ Internet ExplorerⓇ 6.0 or later • DirectXⓇ 9.0c revision 30 (August 2006) or later • Network environment: 100 MB Ethernet, Wireless LAN WLAN (IEEE 802.
❌❌If a DLNA malfunction occurs ✎✎ If a DLNA feature does not work properly, check network settings. ✎✎ A 5-GHz access point is needed to view 1080p pictures via DLNA. A 2.4-GHz access point may cause broken images or other problems. ✎✎ DLNA may not work properly in the wireless network. It is recommended to connect to the wired network. ✎✎ Multi audio and internal subtitles are not supported in DLNA mode.
✎✎ DLNA feature cannot be used with some access points that do not support multicasting. For more information, refer to access point manual or consult with the manufacturer. ✎✎ Supported file types may differ depending on DLNA server environment, even for the file types supported by TV. ✎✎ Too many sub-folders and files included in one folder may cause malfunction. ✎✎ Information about the file from DLNA server may not be displayed correctly.
❐❐To connect Media Link Install Plex program on PC or laptop connected to the same network as Smart TV to access a variety of multimedia including photos, videos, and music stored on PC/laptop. 1 Install Plex Media Server program on PC/laptop. Visit web site at (http:// www.lg.com) and download the Plex program compatible with PC/laptop. 2 After installing the program, right-click the Plex icon in the bottom tray of the PC to sets file section in Media Manager. 3 Select Media Link on the TV's Home.
❐❐To use Media Link HOME ➾ Media Link MEDIA LINK Information may be provided in English. The folders appear as set up in the PLEX Media Manager.
❐❐System requirements for installing PLEX • Minimum requirements PC with at least 1.6 GHz Intel Core Duo Processor and Windows XP SP3, minimum 512 MB of RAM • Recommendations for HD Content transcoding (720p and 1080p) PC with at least 2.
❐❐Caution for using Media Link ✎✎ PLEX media server version installed on Mac or PC supports the version of 0.9.1.14 or later. ✎✎ For the following languages, GUI language is displayed in English and the data being delivered are not displayed: : Thai, Arabic, Persian, Hebrew, Kurdish When replaying video plug-in of a media not supported by the TV, there may be a delay in initial buffering due to extra processing time. The computer’s conversion speed may differ depending on its performance and network speed.
✎✎ When replaying music clips, there is no support for playing with clip moving. (Same as DLNA.) ✎✎ When playing high-definition videos through a Wi-Fi connection, there may be delays or improper playback. ✎✎ The TV may not recognize the computer if the AP settings are not correct. (e.g., When setting the “multicast forward” feature on the AP device, the TV cannot recognize the PC on a Wi-Fi connection.) ✎✎ For some plug-ins, play function may be limited depending on media types.
❐❐To connect USB Connect a USB storage device (external HDD, USB memory) to the USB port of TV to enjoy the content files stored in the USB device on your TV. To remove a USB storage device, choose the Quick Menu ➙ USB Device to remove and check for message that the USB has been removed before taking it out physically. If detached early, an error may occur on the TV or USB storage device. ✎✎ After selecting to remove USB device, it is impossible to read the USB storage device.
❐❐Caution when using USB storage device ✎✎ If USB storage device has a built-in auto recognition program or uses its own driver, it may not work. ✎✎ Some USB storage devices may not work or work improperly. ✎✎ Use only USB storage devices formatted with FAT32 or NTFS File System provided by Windows. ✎✎ For external USB HDD, it is recommended to use device of less than 5V rated voltage and 500 mA rated current. ✎✎ It is recommended to use a USB hub or hard disk drive with power supplied.
✎✎ It is recommended to use USB Memory Stick with 32 GB or less and USB HDD with 2 TB or less. ✎✎ For USB HDD with energy-saving features, turn off and turn on again if it does not work properly. For more information, refer to the user manual of USB HDD. ✎✎ Data in USB storage device can be damaged so be sure to back up important files in a separate storage device. Data maintenance is the user’s responsibility and the manufacturer is not responsible for any data loss.
❐❐To❐use❐Premium HOME❐➾❐Premium This service delivers a wealth of content such as news, weather, stock data, replay TV programing, and video at any time while connected to the network. For Premium content, specialized country-specific services are offered that take into account regional cultural sensitivities, in addition to globally provided content. PREMIUM Search Broadcasting image Premium Content Select desired Content.
❐❐To use paid Content Some Premium Content are provided as for-fee services. To purchase for-fee services, use either LG Electronics’ proprietary billing system or that of each content provider. With LG’s billing system, sign up for membership and register payment information on www.lgappstv.com before paying. 1 Click Sign In button in upper right corner of Home screen to sign in. 2 Move to the desired Premium service.
4 Once the purchasing process is completed, view the paid content by clicking the Buy button. 5 Select your ID on upper menu of Home screen and check history of purchases from My Page ➙ Payment inquiry. It is also available on My Page ➙ Purchase History of web site (www.lgappstv.com). ❐❐To reset Premium HOME ➾ Settings ➙ SUPPORT ➙ Initialization of Premium Premium list, Premium information, country setting, and user sign-in information will be reset.
✎✎ Content on offer by service providers are subject to change to enhance their service quality or deletion without any prior notice. Refer to the web site of each content provider for questions, troubleshooting, or latest information about Content. LG Electronics does not take any legal responsibility for content services and related information including discontinuation of service by the service provider. ✎✎ The quality of Premium service may be affected by Internet connections.
❐❐To use LG Smart World HOME ➾ LG Smart World LG Smart World is a TV application service available through Smart TV Service. You can download and enjoy many different apps (for fee or free) including education, entertainment, life and news. My Apps All Entertainment Hot Top Paid Game Life Top Free Education New News/Information Total Sign in. When you sign in, ID is displayed. When you select the ID, you can select My Page and Sign Out. Select the app to install.
❐❐To sign up with LG Smart World HOME ➾ Sign In Sign up is required to download and run apps. 1 Select Sign Up and agree to Legal Notice. 2 Enter ID and password. 3 In Confirm Password box, enter password again. 4 Select OK to complete sign-up process. ✎✎ If you only have the TV account, only free apps are available. To use paid apps, please add your payment method to our site (www.lgappstv.com). ✎✎ You can sign in up to five TVs with a single ID.
❐❐To install app on TV HOME ➾ LG Smart World 1 Sign in first. 2 Select the desired app from list. Find the desired app quickly using search function. 3 Select “Install” on the detailed info page to install app on TV. You need to pay for paid apps.
✎✎ You can purchase apps from PC or TV but you must use TV to install and run them. ✎✎ If you have insufficient storage space on TV, you can download apps to USB storage device connected through the TV's terminal for USB apps. The app stored on USB is available to run/delete/move from My Apps screen. ✎✎ The USB storage device containing apps cannot be used for saving other data.
❐❐To manage my information HOME ➾ LG Smart World 1 2 3 4 Sign in. Select the currently signed-in ID at the top of the screen. Select My Page. Manages by examining Member Information, My Purchased Apps List and TV Installed Apps List.
My Information Shows basic information about the ID currently signed in. To change your member information, please visit www.lgappstv.com on your PC. Payment Inquiry Views Payment History with the ID you have signed in. Purchased Apps Vews My Purchased Apps List with the ID you have signed in. You can delete/re-install the purchased apps.
HOME ➾ Internet Types URL manually on TV or visits web sites added to Favorite. Types in the web address. Selects when opening several web browsers. Add the current page to favorites. Moves to a previously visited website.
✎✎ Internet supports up to Flash 10 but does not support platform-dependent technology like ActiveX. ✎✎ Internet only works with pre-installed plug-ins. ✎✎ Internet only replays the following media file formats: JPEG / PNG / GIF / WMV (ASF) / WMA / MP3 / MP4 ✎✎ Internet is forcibly closed when memory is insufficient. ✎✎ For the Internet, fonts installed on the TV are used and may not be displayed normally depending on the content played. ✎✎ Internet does not support file and font download.
HOME ➾ Social Center LG Smart TV provides Social Center app that delivers SNS service such as Facebook or Twitter while watching TV. With Social Center app, users can communicate with friends and see all messages and photos posted by SNS friends. 1 Sign in to LG TV account or if not a member, sign up first. 2 Sign in to the desired service (Facebook or Twitter) or if not a member, create an account first. 3 Check SNS services and post messages while watching TV.
SOCIAL CENTER Toggles Facebook/Twitter.
✎✎ If there is no Social Center app on the My Apps, install one from LG Smart World. ✎✎ Log on to SNS services using smart phone’s LG Magic Remote app to conveniently compose text messages. The apps are available on Google Play Store or Apple App Store.
Sign up is required to use LG Smart World. Membership to use free apps: Sign up at TV or PC. Membership to purchase paid apps: Sign up only at PC. Problem When entering menu, the "Initializing" message always appears. Solution • The "Initializing" message shows you how long it takes to reboot the microprocessor and hardware, set up network communications, and communications with SDP (device authentication and basic information download). It takes about 20 seconds and this is a normal process.
Problem Solution While using internet features, there is space that does not appear in some web sites. • The internet of the TV supports up to Flash 10 and may not replay any file format other than the following : JPEG, PNG, GIF, WMV (ASF), WMA, MP3, MP4 Internet closes automatically when visiting website. • If memory is insufficient because of large volume of image information in the web page, internet may be forced to close. I already signed up on TV. Do I need to sign up again at web site (www.
Problem Can each family member use a different ID with a single TV? Solution • It is possible to register and use more than one ID on one TV. • To check the ID registered with TV from HOME ➾ Settings ➙ OPTION ➙ Smart TV Setting ➙ ID List. • You can check the list of apps purchased by each ID. However, you can see all apps installed by each ID in My Apps. • After signing up on a PC, use “Forgot ID?” feature on web What should I do if I forget site (www.lgappstv.com) when needed.
Problem Solution I purchased an app from website (www.lgappstv. com). How can I use it on TV? • To check purchased apps on TV, sign in and view on the Purchased Apps menu. Select the ID at the top of Home and check the app in My Page ➙ Purchased Apps. Can I see history of my purchased apps? • Select the ID at the top of Home and check the app in My Page ➙ Purchased Apps. • Sign in to website (www.lgappstv.com) and then select My Page ➙ Purchase History.
Problem Solution Can I use apps provided from LG Smart TV's LG Smart World on both TV and PC? • Please check if the TV model supports LG Smart World. • The apps provided from LG Smart TV's LG Smart World can only be run on LG Smart TV. • Apps may be purchased from the website (www. lgappstv. com) but cannot be used on a PC or Mac. Use care when purchasing.
Problem There is a difference between the app size shown in the screen and the actual app size installed on TV. I forgot password on TV. What should I do? Solution • The app size shown in the screen includes the additional space needed for installing apps so it may be different from actually installed app size. • If you only have the TV account, you cannot recover your password when it is lost. Create a new ID and log in with the ID.
Problem Solution Do I need to store payment information in web site to purchase paid apps? • To purchase paid apps from TV, enter payment method information at the website (www.lgappstv.com) but to not store payment information, use quick payment service. But, quick payment service is only available on the website, and apps may not be purchased from TV unless payment information is stored on the web site.
Problem I am resistered as a member, but I cannot purchase paid apps. Solution • Log in with the ID you created on your PC and add your payment information. Then, log out from TV and log in again so you can buy paid apps.
❐❐To view 3D images 3D imaging is a technology that utilizes the slight difference in left/right eyes to make the images on TV appear just like real-life 3-dimensional space. 1 Play a 3D-image title or turn to a 3D channel. 2 Put on 3D glasses. 3 Press 3D button to change to 3D imaging. 4 While viewing 3D images, press 3D button on the remote control to end 3D image viewing. ✎✎ Depending on the input signal, available 3D type may differ.
❐❐To adjust details of 3D images HOME ➾ Settings ➙ PICTURE ➙ 3D Settings Adjusts various aspects of 3D imaging. 3D Mode Provides the appropriate 3D depth. • 3D Depth : Adjust 3D depth between object and background. • 3D Viewpoint : 3D image can be made closer or farther from user.
3D Sound Zooming 3D Pattern Recognition Provides the 3D-optimized sound. Converts to 3D screen automatically by analyzing the pattern of the original screen. Normal Image View You can view the 2D images removed the 3D effect. 3D Color Correction Corrects the color of 3D images. ✎✎ Depending on model, the 3D Color Correction may not be available. 3D Image Correction Switches left/right images of 3D video.
❐❐Caution when viewing 3D images ✎✎ When viewing 3D images, it is recommended that the viewer maintain a distance of at least twice the screen's diagonal length. ✎✎ 3D images may not be viewed correctly with shutter-type glasses that require recharging. ✎✎ If a future 3D broadcasting format that is not supported by this TV becomes the standard, an additional device such as a set-top box may be required.
❐❐Warning when using 3D glasses ✎✎ Do not use the 3D glasses as a replacement for your own corrective glasses, sunglasses, or protective goggles. Improper use of 3D glasses may cause eye injuries. ✎✎ Do not store 3D glasses in extreme conditions. Exposure to excessively high or low temperatures may deform the lenses. Do not use deformed glasses. ✎✎ Do not apply pressure to or subject 3D glasses to any impact. Subjecting 3D glasses to rough handling may cause a defect.
❐❐To connect Time Machine dedicated USB storage device 1 Connect a USB HDD (40 GB or larger) to the Time Machine Ready jack on the TV. The Time Machine function works only with the Time Machine Ready jack. 2 USB HDD must be initialized to be used for Time Machine. When connecting a USB HDD that has not been initialized, select MY APPS ➾ Time Machine. USB Device Initialization screen appears. 3 Complete the USB HDD initialization, and set Time Machine Mode to On.
❐❐To change Time Machine mode or initialize USB storage device Wheel(OK) ➾ Setting Changes Time Machine settings while using Time Machine. Time Machine Mode On: Automatically enables Timeshift Mode when the TV is turned on. Off: Disables Timeshift Mode. USB storage The connected HDD becomes available for the use of Time device initialization Machine. All data stored on USB device will be deleted.
✎✎ Use of HDD (Hard Disk Drive) is recommended. For SSD (Solid State Drive), the number of writes/clears is limited. ✎✎ A USB HDD size of between 40 GB and 2 TB is recommended. ✎✎ After USB storage device initialization the USB HDD will not be recognized on a PC. ✎✎ The data stored on USB device may be damaged. Data maintenance is the user's responsibility and the manufacturer is not responsible for any data loss. ✎✎ If there is problem with a data sector of the USB storage device, it may not work properly.
Time Machine enables storage of live TV programs on USB storage device while watching digital broadcast so missed segments of the program being watched and previously aired programs may be viewed later. ✎✎ The Timeshift mode can be set up to 90 minutes. (For Italy, it can be set for up to 60 minutes.) ✎✎ An error in the data sector of the USB storage device may result in malfunction.
Press Wheel(OK) during Time Machine. Selects the desired point and plays Moves to currently broadcasting playtime Recording starts Live TV Changes Timeshift Mode Initialize USB Device Recorded TV Schedule List Schedule Option Starts recording from DVR play control Checks defined current point schedule list Shows recorded programs Sets schedule ✎✎ Image shown may differ from your TV.
❐❐To immediately start recording Wheel(OK) ➾ Recording Starts Records a program when you must leave the room in the middle of viewing. ✎✎ Only records the digital broadcast you are currently watching. ✎✎ If you force your TV to power off whilst recording, the programme may not be saved. Ideally, you should stop the recording and check that the programme has recorded before turning it off.
❌❌To stop recording Wheel(OK) ➾ Recording Stop Stops recording immediately ❌❌To modify recording end time Wheel(OK) ➾ Stop Option ➙ Recording end time modify ✎✎ Maximum recording time is 5 hours.
❐❐To schedule recording Wheel(OK) ➾ Schedule Select schedule by program Selects a program from the Program Guide screen to schedule a viewing or recording. Select schedule by date Selects date, time, and channel to schedule a viewing or recording. ✎✎ The minimum length of Timer Recording is 2 minutes. ✎✎ If one sector of the disk is damaged, one or all of the items in the Schedule List may be affected. ✎✎ A maximum of 30 items may be entered in the Schedule List.
❐❐To assure and/or modify schedules Wheel(OK) ➾ Schedule List Assures, modifies, or deletes the scheduled viewing or recording.
❐❐To see Recorded TV HOME ➾ SmartShare ➙ Recorded TV Selects the recording stored in USB HDD to view/delete it. Play on previous playtime For a recording once-played in the past, plays it from the previous playtime. Play from the start Plays the selected recording from the start. Delete Deletes the selected recording. ✎✎ The maximum number of Recorded TV is 300.
❐❐To control recording playback Press Wheel(OK) button on the remote control during playback. Selects the desired point and plays. Thumbnail List Clip-Edit Sets Recording Playback Option Repeat Plays Control Thumbnail List Clip-Edit/Repeat ✎✎ Image shown may differ from your TV.
Download the LG Magic Remote app from Google Play Store or Apple App Store to watch TV with your smartphone. • Now you can enjoy your favorite TV shows on your smartphone. (Some models only) • Add your favorite channels on your smartphone. • You can use the functions such as PREMIUM, MY APPS directly on your smartphone. • Select an item using the TV Search function from your smartphone to watch it on TV. • The text input function is supported, so you can enter text easily.
❐❐To use a USB wired/wireless mouse Connect your mouse to the USB port. Use the mouse to move the pointer on the TV screen and select the menu you want. The right and the special buttons on the mouse do not work. Mouse Left Button Wheel Button Magic Remote Control OK Button on Magic Remote Control Wheel Button on Magic Remote Control ✎✎ The usability of a wireless USB mouse and keyboard may be affected by Radio Frequency environment and the distance.
❐❐To use a USB wired/wireless keyboard Connect your keyboard to the USB port. You can enter text with the keyboard when using the search function and the Internet. ✎✎ Text cannot be entered on some screens. ✎✎ Applicable Keyboards It is recommended to use a product which is tested for compatibility with LG TV.
❐❐To use a game pad Connect your game pad to the USB port on the TV if the game supports the use of game pad. ✎✎ Applicable Game Pads It is recommended to use an authorized game pad which is tested for compatibility with LG TV.
HOME ➾ Settings ➙ SUPPORT ➙ Software Update Uses Software Update to check and obtain the latest version. It is also possible to check manually for available updates. Software Update Check Update Version Set it to On. When an update file is detected, the file is automatically downloaded. When the file download is complete, the software update window appears. Checks the version installed and when an update is available, the download process can be performed manually.
✎✎ The latest version can be obtained via digital broadcast signals or internet connections. ✎✎ Changing the channel while downloading the software via digital broadcast signal interrupts the download process. Returning to the initial channel allows downloading to resume. ✎✎ If software is not updated, certain functions may not work properly.
If the following symptoms occur, please carry out the checks and adjustments described below. There may be no malfunction. HOME ➾ Settings ➙ SUPPORT ➙ Signal Test Shows the MUX and Service information etc. If you select Antenna & Satellite or Cable & Satellite, a signal test only for Antenna or Cable is displayed. ❐❐General Problem Cannot view certain channels. Solution • Adjust the location or orientation of the antenna. • Save the desired channels on Auto Tuning or Channel Edit.
❐❐Pictures HOME ➾ Settings ➙ SUPPORT ➙ Picture Test Check if the image signal output is normal by beginning with Picture Test. If there is no problem with the test image, check external device connections or broadcast signals. Problem Images from previous channel or other channels linger or the screen shows annoying lines. Solution • Try adjusting the antenna to the direction of the TV station or refer to the manual for proper way to connect the antenna.
Problem Vibrating horizontal/vertical lines and fishnet patterns appear momentarily. The screen display freezes or does not work properly in digital broadcast. Digital broadcast is not on even though the cable is connected. Solution • Such a problem may happen when there is strong electronic interference. Turn off other electronic devices such as mobile phones, power tools and other small electrical appliances. • It may happen when the signals are weak or the reception unstable.
Problem Solution Image is not on or not clear when connected to HDMI. • Check the HDMIⓇ cable specifications. Use only HDMIⓇ cable. Other cables may cause images to fade in and out or not be displayed properly. • Verify that all cable connections are securely connected. When connections are not secure, images may not be properly displayed. Does not work when USB storage device is connected. • Verify that the USB device and cable is version 2.0 or higher.
❐❐Sound HOME ➾ Settings ➙ SUPPORT ➙ Sound Test Try Sound Test first to verify that sound signal output is normal. When the test sound is normal, check external device connections or broadcast signals. Problem Solution Screen display is on but no sound. • Check other TV channels. • Make sure the TV Speaker is set to On. For analog broadcast, stereo is not clear or sound comes from one speaker only.
Problem Solution TV sound is not in sync with the lips or the sound breaks up occasionally. • If it happens on a certain TV channel, it may be caused by problems with an individual station’s broadcast signal. Check with the TV station or local cable operator. Whenever changing the channel, the volume is different. • Depending on the channel, there can be differences in volume. • Please set Auto Volume to On.
Problem Solution On certain channels, sound does not come out or only the background music plays. (If it is a program created for overseas) • On Language, set Language ➙ Audio Language as the desired language. Even if the language on Audio is changed, once the power is turned off or the channel is changed, the default settings will be reset. There is no sound when connected to HDMI/USB. • Verify that the HDMIⓇ cable is high speed. • Check if the USB device and cable is version 2.0 or higher.
❐❐PC connection problem Problem Solution The screen display is not on after connecting to the computer. • Verify that the computer and the TV are securely connected. • Turn the TV off and back on using the remote control. • Restart the PC with the TV on. • Check if the resolution is correctly set for PC input. • To use the TV as a secondary monitor, check if the connected desktop or laptop supports dual monitor displays. • Reconnect the RGB/HDMI cable.
Problem When connected to the computer, the display is partially cut off or shifts to one side. Solution • Set up the resolution supporting PC input. (If it does not work, please reboot the computer.) • Select Screen and adjust Position/Size/Phase.
❐❐Trouble with replaying movies in My Media. Problem Files on the Movie List are not displayed. "This file is invalid." The above error message appears or the image display is not normal even though the sound is okay. Solution • Check if the file on the USB storage device can be read on a computer. • Check that the file extension is supported. • Verify that the file replays normally on the video player in the computer. (Check for damaged files.) • Check if the resolution is supported by the computer.
Problem Solution • Verify that the file replays normally on the video player in "Unsupported Audio." the computer. (Check for damaged files.) The above error message • Check that the audio codec is supported by the appears or the sound is not computer. normal even though the • Verify that the bit rate is supported. image display is okay. • Verify that the sample rate is supported.
Problem Subtitle is not displayed. Solution • Verify that the file replays normally on the video player in the computer. (Check for damaged files.) • Check if the video file shares the same name with the subtitle file. • Verify that the video and subtitle files are placed in the same folder. • Verify that the subtitle file format is supported. • Verify that the subtitle language is supported. (Open the subtitle files in Notepad to check for the language.) ✎✎ Image shown may differ from your TV.
If the following symptoms occur, please carry out the checks and adjustments described below. There may be no malfunction. HOME ➾ Settings ➙ SUPPORT ➙ Signal Test Shows the MUX and Service information etc. If you select Antenna & Satellite or Cable & Satellite, a signal test only for Antenna or Cable is displayed. ❐❐General Problem Cannot view certain channels. Solution • Adjust the location or orientation of the antenna. • Save the desired channels on Auto Tuning or Channel Edit.
❐❐Pictures HOME ➾ Settings ➙ SUPPORT ➙ Picture Test Check if the image signal output is normal by beginning with Picture Test. If there is no problem with the test image, check external device connections or broadcast signals. Problem Images from previous channel or other channels linger or the screen shows annoying lines. Solution • Try adjusting the antenna to the direction of the TV station or refer to the manual for proper way to connect the antenna.
Problem Vibrating horizontal/vertical lines and fishnet patterns appear momentarily. The screen display freezes or does not work properly in digital broadcast. Digital broadcast is not on even though the cable is connected. Solution • Such a problem may happen when there is strong electronic interference. Turn off other electronic devices such as mobile phones, power tools and other small electrical appliances. • It may happen when the signals are weak or the reception unstable.
Problem Solution Image is not on or not clear when connected to HDMI. • Check the HDMIⓇ cable specifications. Use only HDMIⓇ cable. Other cables may cause images to fade in and out or not be displayed properly. • Verify that all cable connections are securely connected. When connections are not secure, images may not be properly displayed. Does not work when USB storage device is connected. • Verify that the USB device and cable is version 2.0 or higher.
❐❐Sound HOME ➾ Settings ➙ SUPPORT ➙ Sound Test Try Sound Test first to verify that sound signal output is normal. When the test sound is normal, check external device connections or broadcast signals. Problem Solution Screen display is on but no sound. • Check other TV channels. • Make sure the TV Speaker is set to On. For analog broadcast, stereo is not clear or sound comes from one speaker only.
Problem Solution TV sound is not in sync with the lips or the sound breaks up occasionally. • If it happens on a certain TV channel, it may be caused by problems with an individual station’s broadcast signal. Check with the TV station or local cable operator. Whenever changing the channel, the volume is different. • Depending on the channel, there can be differences in volume. • Please set Auto Volume to On.
Problem Solution On certain channels, sound does not come out or only the background music plays. (If it is a program created for overseas) • On Language, set Language ➙ Audio Language as the desired language. Even if the language on Audio is changed, once the power is turned off or the channel is changed, the default settings will be reset. There is no sound when connected to HDMI/USB. • Verify that the HDMIⓇ cable is high speed. • Check if the USB device and cable is version 2.0 or higher.
❐❐PC connection problem Problem Solution The screen display is not on after connecting to the computer. • Verify that the computer and the TV are securely connected. • Turn the TV off and back on using the remote control. • Restart the PC with the TV on. • Check if the resolution is correctly set for PC input. • To use the TV as a secondary monitor, check if the connected desktop or laptop supports dual monitor displays. • Reconnect the HDMI cable.
Problem When connected to the computer, the display is partially cut off or shifts to one side. Solution • Set up the resolution supporting PC input. (If it does not work, please reboot the computer.
❐❐Trouble with replaying movies in My Media. Problem Files on the Movie List are not displayed. "This file is invalid." The above error message appears or the image display is not normal even though the sound is okay. Solution • Check if the file on the USB storage device can be read on a computer. • Check that the file extension is supported. • Verify that the file replays normally on the video player in the computer. (Check for damaged files.) • Check if the resolution is supported by the computer.
Problem Solution • Verify that the file replays normally on the video player in "Unsupported Audio." the computer. (Check for damaged files.) The above error message • Check that the audio codec is supported by the appears or the sound is not computer. normal even though the • Verify that the bit rate is supported. image display is okay. • Verify that the sample rate is supported.
Problem Subtitle is not displayed. Solution • Verify that the file replays normally on the video player in the computer. (Check for damaged files.) • Check if the video file shares the same name with the subtitle file. • Verify that the video and subtitle files are placed in the same folder. • Verify that the subtitle file format is supported. • Verify that the subtitle language is supported. (Open the subtitle files in Notepad to check for the language.) ✎✎ Image shown may differ from your TV.
❐❐根據NCC低功率電波輻射性電機管理辦法 規定 第十二條 第十四條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或 使用者均不得擅自變更頻率、加大功率或變更原設計之特性及 功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經 發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續 使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻 射性電機設備之干擾。
