Owner’s Manual
PREPARATION
10
INSTALLATION
DETACHMENT
ꔛ
Image shown may differ from your TV.
!
NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Assemble the parts of the STAND BODY
with the STAND BASE of the TV. At this
time, tighten the screws that hold the
STAND BODY on.
3
Assemble the TV as shown.
4
Assemble the part of the STAND REAR
COVER with the TV.
5
Install the 4 screws into the holes shown.
1
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2
Remove the screws that hold the stand on.
3
Detach the STAND REAR COVER from TV.
4
Detach the stand from TV.
STAND INSTRUCTIONS
(For 26/32/37/42/47/55LE5300, 26LE5500)
STAND BASE
STAND BODY
STAND REAR
COVER
M4 x 16
M4 x 14
26LE5300,
26LE5500
Other models
M4 x 22 (32LE5300)
M4 x 24 (37/42LE5300)
M4 x 26 (47/55LE5300)
M4 x 20
26LE5300,
26LE5500