OWNER’S MANUAL Please read this manual carefully before operating your set and retain it for future reference. EC93** EC97** EG97** www.lg.
TABLE OF CONTENTS TABLE OF CONTENTS ENG ENGLISH 3 LICENSES 35 MAGIC REMOTE FUNCTIONS 3 OPEN SOURCE SOFTWARE NOTICE INFORMATION 36 36 36 Registering Magic Remote How to use magic remote Precautions to Take when Using the Magic Remote 3 EXTERNAL CONTROL DEVICE SETUP 37 USING THE USER GUIDE 4 SAFETY INSTRUCTIONS 38 MAINTENANCE 9 - Viewing 3D Imaging 10 INSTALLATION PROCEDURE 38 38 38 Cleaning Your TV - Screen, frame, cabinet and stand - Power cord 38 TROUBLESHOOTING 10 ASSEMBLING
LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION / EXTERNAL CONTROL DEVICE SETUP 3 LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. ENGLISH ENG OPEN SOURCE SOFTWARE NOTICE INFORMATION To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS yyDo not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. yyDo not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury. yyDispose of used batteries carefully to ensure that a small child does not consume them. Please seek Doctor- Medical Attention immediately if child consumes batteries.
SAFETY INSTRUCTIONS ENG ENGLISH yyIf any of the following occur, unplug the product immediately and contact your local service centre. --The product has been impacted by shock --The product has been damaged --Foreign objects have entered the product --The product produced smoke or a strange smell This may result in fire or electric shock. yyUnplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time.
SAFETY INSTRUCTIONS yyDo not place non-rechargeable batteries in charging device. yyMake sure there are no objects between the remote control and its sensor. yyPeriodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. yyWhen connecting external devices such as video game consoles, make sure the connecting cables are long enough.
SAFETY INSTRUCTIONS yyWhen unplugging the cable, grab the plug and unplug it, by pulling at the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous. ENG ENGLISH yyWhen moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
SAFETY INSTRUCTIONS Viewing 3D Imaging WARNING yy Viewing Time -- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING NOTE ENG ENGLISH yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. yyThe available menus and options may differ from the input source or product model that you are using. yyNew features may be added to this TV in the future. yyThe TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 11 Tag On ENGLISH ENG Owner’s manual Magic remote, Batteries (AA) (See p.35) Cinema 3D glasses The number of 3D glasses may differ depending on the model or country. Tag on (Depending on model) Cable Holder (See p.22, 23) Component gender cable (See p.30) Composite gender cable (See p.30,31) HDMI Cable (Depending on model) (See p.27, 28) AV Cover (Only EC93**) (See p.18) AV Cover (Only EC97**) (See p.18) AV Cover (Only EG97**) (See p.
ASSEMBLING AND PREPARING Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models.
ASSEMBLING AND PREPARING 13 Parts and buttons A type : EC93** Screen Speakers Remote Control Sensor and Intelligent Sensor1 LG Logo Light Joystick button2 B type : EC97** Built-In Camera Screen Speakers Remote Control Sensor and Intelligent Sensor1 LG Logo Light Joystick button3 ENGLISH ENG
ASSEMBLING AND PREPARING C type : EG97** Built-In Camera ENG ENGLISH Screen Speakers LG Logo Light Remote Control Sensor and Intelligent Sensor1 Joystick button2 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment. 2 Joystick Button - This button is located behind the TV screen. 3 Joystick Button - This button is located below the TV screen.
ASSEMBLING AND PREPARING 15 Using the joystick button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Power On When the TV is turned off, place your finger on the joystick button and press it once and release it. Power Off When the TV is turned on, place your finger on the joystick button and press it once for a few seconds and release it.
ASSEMBLING AND PREPARING Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yyWhen transporting a large TV, there should be at least 2 people. yyWhen transporting the TV by hand, hold the TV as shown in the following illustration. ENG ENGLISH CAUTION yyAvoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING 17 Setting up the TV (Image shown may differ from your TV.) (Only EC97**) Back cover 1 (Only EC93**, EG97**) ENGLISH ENG Detaching the stand Screen 1 (Only EC93**) 4 EA M4 x L20 (Only EG97**) 8 EA M4 x L20 2 8 EA M4 x L20 2 Back cover Screen CAUTION CAUTION yyWhen you assemble the stand, have the arrows on the bottom of the stand base looking towards the same direction as the screen.
ASSEMBLING AND PREPARING Mounting on a table Attaching the AV cover 1 Assemble the AV Cover as shown. ENG ENGLISH Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm (Only EC93**) 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm 10 cm AV cover (Only EC97**) 5 cm 10 cm AV cover 2 (Only EG97**) Connect the power cord to a wall outlet.
ASSEMBLING AND PREPARING Securing the TV to a wall (This feature is not available for all models.) To use the desk-type stand safely, make sure to securely attach it to a wall. 19 Mounting on a wall 10 cm 10 cm 10 cm 10 cm Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. 1 2 3 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
ASSEMBLING AND PREPARING Model 77EG97** VESA (A x B) A B ENG ENGLISH Standard screw Number of screws Wall Type Set-up Guide (Only EG97** - Separate purchase) 400 x 400 Guide spacer assembly 1 Remove the VESA screws (4 EA). 2 Assemble Guide spacer (4 EA) and Guide spacer screws (4 EA). M6 4 LSW420BX Wall mount bracket CAUTION yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.
ASSEMBLING AND PREPARING How to detach the stand Type 1. Hanging the TV on the wall before removing a stand. 1 21 Type 2. Hanging the TV on the wall after removing a stand. 1 ENGLISH ENG Wall mount bracket 2 CAUTION yy When laying the TV on its back on a padded table or surface, be careful to prevent the TV from being damaged.
ASSEMBLING AND PREPARING Tidying cables 4 (Image shown may differ from your TV.) ENG ENGLISH Stand Type (Only EC93**) Gather and bind the cables with the cable holder. Wall mount bracket 5 Cable Holder (Only EC97**) 1 Put the cable management in the hole of TV back cover.
ASSEMBLING AND PREPARING 2 Fix the cable management with cable management screw. 23 (Only EG97**) Gather and bind the cables with the cable holder. ENGLISH ENG M4 x L10 2 EA NOTE Cable Holder yyWhen attaching the cable management, use a magnetic screwdriver. yyIf you don’t have a magnetic screwdriver, insert the screws into the cable management and then attach it to the TV. Wall Mount Type (Only EC93**) 3 Gather and bind the cables with the cable holder. Arrange the cables in the cable mangement.
ASSEMBLING AND PREPARING Using Built-in Camera Preparing Built-in Camera (Only EC97**, EG97**) 1 Pull up the built-in camera at the back of the TV. ENG ENGLISH Angle Adjustment Lever This TV does not support the use of an external camera. Slide NOTE yyBefore using the built-in camera, you must recognize the fact that you are legally responsible for the use or misuse of the camera by the relevant national laws including the criminal law.
ASSEMBLING AND PREPARING 3 25 Push down the built-in camera when you are not using it. ENGLISH ENG Name of Parts of Built-in camera Camera Lens Protective Film Microphone Checking the Camera’s Shooting Range 1 2 Press the (Home) button on the remote control to display the HOME menu. Select CAMERA and then press the Wheel(OK) button. NOTE yyThe optimal distance from the camera to use the motion recgnition function is between 1.5 m and 4.5 m.
MAKING CONNECTIONS MAKING CONNECTIONS This section on MAKING CONNECTIONS mainly uses diagrams for the EC97** models. Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). ENG ENGLISH VHF Antenna Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device.
MAKING CONNECTIONS HDMI connection 27 (Only EC97**) Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown.
MAKING CONNECTIONS (Only EG97**) ENG ENGLISH ARC (Audio Return Channel) yyAn external audio device that supports SIMPLINK and ARC must be connected using HDMI/DVI IN 1 (ARC) or HDMI(4K @ 60 Hz)/DVI IN 2 (ARC) port. yyWhen connected with a high-speed HDMI cable, the external audio device that supports ARC outputs optical SPDIF without additional optical audio cable and supports the SIMPLINK function.
MAKING CONNECTIONS 29 DVI to HDMI connection (Only EC97**) ENGLISH ENG Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable.
MAKING CONNECTIONS Component connection (Only EG97**) Transmits analogue video and audio signals from an external device to the TV. Connect the external device and the TV with a component gender cable as shown. ENG ENGLISH IN AV VIDEO COMPONENT AUDIO PR PB Y (*Not Provided) AV AUDIO OUT DVI OUT DVD / Blu-Ray / PC / HD Cable Box / HD STB GREEN (Use the component gender cable provided.
MAKING CONNECTIONS Composite connection Audio connection Transmits analogue video and audio signals from an external device to the TV. Connect the external device and the TV with a composite gender cable as shown. You may use an external audio system instead of the built-in speaker. 31 Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown.
MAKING CONNECTIONS MHL connection Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. ENG ENGLISH Headphone connection 3 (Only EC93**) 2 OUT Ext.
MAKING CONNECTIONS (Only EC97**) 33 (Only EG97**) ENGLISH ENG MHL passive cable (*Not Provided) MHL passive cable (*Not Provided) Mobile phone Mobile phone NOTE yyConnect the mobile phone to the HDMI/DVI IN 4(MHL) or HDMI(4K @ 60 Hz)/DVI IN 4(MHL) port to view the phone screen on the TV. yyThe MHL passive cable is needed to connect the TV and a mobile phone. yyThis only works for the MHL-enabled phone. yySome applications can be operated by the remote control.
MAKING CONNECTIONS USB connection (Only EC97**, EG97**) USB 2 2 USB 3 3 (Only EC93**) 1 ENG ENGLISH Connect a USB storage device such as a USB flash memory, external hard drive or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. HUB (*Not Provided) USB (*Not Provided) HDD HUB (*Not Provided) HDD (*Not Provided) (*Not Provided) USB (*Not Provided) NOTE yySome USB Hubs may not work.
MAGIC REMOTE FUNCTIONS 35 MAGIC REMOTE FUNCTIONS CAUTION yyDo not mix old and new batteries, as this may damage the remote control. yyIn Analogue TV and some countries, some remote control buttons may not work. (Home) Accesses the Home menu. (POWER) Turns the TV on or off. (Voice recognition) (BACK) Returns to the previous screen. Coloured buttons These access special functions in some menus. ( : Red, : Green, : Yellow, : Blue) Wheel (OK) Press the center of the Wheel button to select a menu.
MAGIC REMOTE FUNCTIONS Registering Magic Remote BACK HOME How to register the Magic Remote ENG ENGLISH (Wheel) P MY APPS To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control. * If the TV fails to register the Magic Remote, try again after turning the TV off and back on.
USING THE USER GUIDE 37 USING THE USER GUIDE 1 Press the (Home) button to access the Home menu. 2 Select User Guide and press the button. Wheel(OK) ENGLISH ENG User Guide allows you to more easily access the detailed TV information.
MAINTENANCE / TROUBLESHOOTING MAINTENANCE ENG ENGLISH Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yyMake sure to turn the power off and disconnect the power cord and all other cables first. yyWhen the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
SPECIFICATIONS 39 SPECIFICATIONS (Only EC93**) Wireless LAN Standard Bluetooth IEEE 802.11a/b/g/n 2400 to 2483.5 MHz 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) Frequency Range 802.11a: 13 dBm 802.11b: 15 dBm 802.11g: 14 dBm 802.11n - 2.4 GHz: 16 dBm 802.11n - 5 GHz: 16 dBm Output Power (Max.) Standard Bluetooth Version 3.0 Frequency Range 2400 to 2483.5 MHz Output Power (Max.
SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. Thickness Depth ENG ENGLISH 55EC93** MODEL Dimensions (W x H x T(D)) 55EC9300-CA With stand (mm) 1225 x 753 x 204 Without stand (mm) 1225 x 715 x 44 (81) With stand (kg) 16.7 Weight Without stand (kg) 14.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) ►► To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP 0 0 5th Band 0 0 1 0 1 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value. 19. Energy Saving (Command: j q) ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical Channel Number - 46 : Cable TV (CADTV) – Use Major Channel Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). * Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV ISDB-BS (Japan) 03 : ISDB-CS1 (Japan) 04 : ISDB-CS2 (Japan) 11 : CATV O 01 X X X 02 X X X 03 X O O [Data03][x] [t][ ][Set ID][ ][NG][Data00][x] 40 : Component1 60 : RGB 41 : Component2 90 : HDMI1 92 : HDMI3 91 : HDMI2 93 : HDMI4 26.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 27. Auto Configure (Command: j u) (Depending on model) ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.