Owner's Manual

23
ENGENGLISH
ASSEMBLING AND PREPARING
Video call camera
Product Handling

Do not let the camera get wet. Liquid getting
into the camera could cause a short circuit.

Wipe the camera gently with a dry cloth to
remove any dust or dirt. If the product is very
dirty, spray a mild detergent on the cloth rst.

Do not clean with thinner, alcohol, benzene or
any other volatile agent.
These may damage the product’s surface or
affect its operation.

Do not disassemble, repair or alter the product.
Incorrect disassembly may cause a re, electric
shock, or injury.

Do not shake the camera.

Do not pull on the cable.
Installation Instructions

Make sure you have enough space for
connections when installing the product.

Do not install in a dusty, dirty or moist area.

Do not install in direct sunlight or near a heat
source.

Magnetic objects, such as speakers, may
interfere with the camera’s operation.

Install the product in a place with moderate
temperature and humidity. The recommended
temperature range is 0 °C (32 °F) to 40 °C (104
°F).

Strong electromagnetic waves from other
devices could interfere with the camera’s
operation.

Remove all the protective plastic bags (Vinyl)
before use.
The product and company names contained in this
manual may or may not be registered trademarks
or copyrights, and are only used for identification
or explanatory purposes. All trademarks reserved.
Overview
Stand
Lens
Microphones
Activity
Indicator
USB Cable
Stand-Bottom
Stand-Arm
Stand-cable
holder