Owner’s Manual
Table Of Contents
- COVER
- LICENSES
- IMPORTANT SAFETY INSTRUCTIONS
- TABLE OF CONTENTS
- ASSEMBLING AND PREPARING
- REMOTE CONTROL
- WATCHING TV
- 3D Imaging (For 3d Tv)
- ENTERTAINMENT
- CUSTOMIZING TV SETTINGS
- MAKING CONNECTIONS
- MAINTENANCE
- TROUBLESHOOTING
- SPECIFICATIONS
- IR CODES
- EXTERNAL CONTROL DEVICE SETUP
- OPEN SOURCE LICENSE
24
ENG
ENGLISH
ASSEMBLING AND PREPARING
3
Secure the TV and the stand with the 4
screws.
Model Screw for
assembly
Number of
screws
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
M4 x 26 4
60PZ200 M4 x 28 4
CAUTION
y
Tighten the screws firmly to prevent
the TV from tilting forward. Do not over
tighten.
To detach the stand,
1
Lay the TV with the screen side down on a flat
surface.
2
Remove the 4 screws and pull the stand away
from the TV.
Model Screw for
assembly
Number of
screws
42/50PW340
42/50PW350
42/50PW350U
42/50PW350R
50PZ200
M4 x 26 4
60PZ200 M4 x 28 4
3
Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
Attach the protection cover tape.
- This will protect the opening from
accumulating dust and dirt.
- When installing the wall mounting bracket,
use the Protection cover.
Protection cover
Protection
cover tape