Owner's Manual

19
ENGENGLISH
ASSEMBLING AND PREPARING
Tidying cables
1 Install the Power Cord Holder and Power Cord. It
will help prevent the power cable from being removed
by accident.
2 Gather and bind the cables with the Cable Holder.
CAUTION

Do not move the TV by holding the cable holder
and power cord holder, as the cable holders may
break, and injuries and damage to the TV may
occur.
CAUTION

Disconnect the power first, and then move or
install the TV. Otherwise electric shock may occur.

If you install the TV on a ceiling or slanted wall, it
may fall and result in severe injury.
Use an authorised LG wall mount and contact the
local dealer or qualified personnel.

Do not over tighten the screws as this may cause
damage to the TV and void your warranty.

Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the manufacturer’s warranty.
NOTE

Use the screws that are listed on the VESA
standard screw specifications.

The wall mount kit includes an installation manual
and necessary parts.

The wall mount bracket is not provided. You can
obtain additional accessories from your local
dealer.

The length of screws may differ depending on the
wall mount. Make sure to use the proper length.

For more information, refer to the manual supplied
with the wall mount.
Cable holder
Power cord holder
(Only 42PN45**)
(Only 50PN45**, 50/60PN65**)
Power cord holder
Separate purchase(Wall Mounting Bracket)
Model
42/50PN45**
50/60PN65**
VESA (A x B) 400 x 400
Standard screw M6
Number of screws 4
Wall mount bracket PSW420BX
A
B