Manual

01. Power (Command: k a)
To control Power On/Off of the TV.
Transmission[k][a][][SetID][ ][Data][Cr]
Data 00: Power Off Data 01 : Power On
A_knowledgement [a][ ][Set ID][ ][OKiNG] [Data] [x]
* In a like manner, if other functions transmit 'FF' data
based on this format, Acknowledgement data feedback
presents status about each function.
Note: In this model, TV will send the Acknowledge
after power on processing completion.
There might be a time delay between command and
acknowledge.
02.
Input Select (Command: x b)
To select input source for TV.
TransmlssiOn[x] [b][ ][set ID][ ] [Data] [cr]
Data 00: DTV (Antenna) Data 01 : DTV (Cable)
Data 10: Analog (Antenna) Data 11: Analog (Cable)
Data 20:AV1 Data 21 : AV2
Data 40: Component 1 Data 41: Component 2
Data 60: RGB-PC Data 90:HDMI1
Data 91:HDMI2 Data 92:HDMI3
Data 95:HDMI4
AcknOWledgement [b][ ][Set ID][ ][OK/NG] [Data] [x]
* Use the feature depending on your model.
0S.
Volume Mute (Command: k e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Transmission[k] [e][ ][set ID][ ][Data] [cr]
Data 00: Volume mute on (Volume off)
Data 01: Volume mute off (Volume on)
Acknowledgement[el[ ][Set ID][ ][OKiNG] [Data] [x]
06.
Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the volume buttons on
remote control.
Transmission[k] [f] [] [Set ID] [ ] [Data] [Cr] ....
Data Min: 00 - Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping'. See page 13:5.
Acknowledgement[f] [] [Set ID] [] [OKiNG] [Data] [x]
07.
Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission[k] [g][ ][Set ID][ ][Data] [Cr]
Data Min: O0 - Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping: See page 13:5.
Acknowledgemen_ [g] [ ] [set ID] [ ] [OK/NG] [Data] [x]
"O
"O
Z
_D
X
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission [k] [c] [ ] [Set ID] [ ] [Data] [Cr]
Data 01:4:3 05: Zoom 2
02:16:9 06: Set by program
04: Zoom 1 09:Just scan
Reserved
A_knoWledgemeni [C] [ ] [Set ID] [ ] [OK/NG] [Data] [x]
08.
Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission[k] [h][] [Set ID] [ ] [Data] [cr]
Data Min: 00 _ Max: 64 (*transmit by Hexadecimal code)
_Refer to 'Real data mapping'. See page 133.
ACknowledgement [h][] [Set ID] [] [OK/NG] [Data] [x]
04. Screen Mute (Command: k d)
To select screen mute on/off.
TransmisSiOn [k] [d] [] [set ID] [] [Data] [Cr]
Data 00: Screen mute off (Picture on)
Data 01 : Screen mute on (Picture off)
ACknoWledgemen_ [d] [] [Set ID] [] [OK/NG] [Data] [x]
132