OWNER’S MANUAL LED LCD TV / LCD TV / PLASMA TV Please read this manual carefully before operating the set and retain it for future reference.
LICENSES LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified® device that plays DivX video.
IMPORTANT SAFETY INSTRUCTIONS 3 IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. Heed all warning. Follow all instruction. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on yy or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified yy by the manufacturer. Use only with a cart, stand, tripod, bracket, yy or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
IMPORTANT SAFETY INSTRUCTIONS Do not expose to dripping or splashing and yy do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). Grounding yy Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.
IMPORTANT SAFETY INSTRUCTIONS yyDot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.
IMPORTANT SAFETY INSTRUCTIONS yyLCD If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
TABLE OF CONTENTS TABLE OF CONTENTS 2 3 8 LICENSES IMPORTANT SAFETY INSTRUCTIONS TABLE OF CONTENTS 46 Using the quick menu 47 Using the customer support 47 - Testing the Picture / Sound 47 - Using the product or service information 48 3D IMAGING (FOR 3D TV) 48 3D Technology - When watching 3D imaging 49 - When using 3D Glasses ENGLISH ENG 10 ASSEMBLING AND PREPARING 48 10 Unpacking 49 - 3D Imaging Viewing Range 14 Optional Extras 50 Viewing 3D Imaging 15 Parts and buttons 25
TABLE OF CONTENTS 78 - Composite Connection 79 Connecting to a PC 79 - HDMI Connection 79 - DVI to HDMI Connection 80 - RGB Connection 81 Connecting to an Audio System 81 - Digital optical audio connection 81 Connecting to a USB 81 Connecting to a Headphone ( 82 SIMPLINK Connection 82 - Activating and Using the SIMPLINK LCD 9 ) menus 83 MAINTENANCE Cleaning Your TV 83 - Screen and frame 83 - Cabinet and stand 83 - Power cord 83 Preventing “Image burn” or “Burn-in” on your
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item. ENERGY AV MODE INPUT TV SAVING 1 2 3 4 5 6 7 8 9 LIST 0 FLASHBK MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.
ASSEMBLING AND PREPARING 11 PW340, PW350, PW350U, PW350R, PZ200 series (Other models) x4 (For 60PZ200) x3 M4 x 26 M5 x 14.
ASSEMBLING AND PREPARING LK330, LK430, LK450, LK451C, LK453C, LK520 series (Except 47LK450, 47LK451C, 47/55LK520) x8 M4 x 20 Screw for assembly Screw for fixing Protection cover Power Cord CAUTION Do not use any unapproved items to ensure the safety and product life span. yy Any damages or injuries by using unapproved items are not covered by the warranty. yy In case of some model, the thin film on screen is a part of TV, So don’t take it off.
ASSEMBLING AND PREPARING 13 NOTE The items supplied with your product may vary depending on the model. yy Product specifications or contents of this manual may be changed without prior notice due to yy upgrade of product functions. ) How to use the ferrite core yy( 1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
ASSEMBLING AND PREPARING Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. This device only works with compatible LG Plasma TV, LED LCD TV or LCD TV.
ASSEMBLING AND PREPARING 15 Parts and buttons PW340, PW350, PW350U, PW350R, PZ200 series Side Connection panel (For PZ200 series) AV (Audio and Video) input AV IN 2 Screen SERVICE ONLY input VIDEO L/MONO AUDIO R HDMI input VIDEO L/MONO AUDIO R IN 3 USB IN USB input IN 3 SERVICE ONLY (Other models) Remote control and intelligent1 sensors AV IN 2 Speakers HOME INPUT ENTER VOL CH Touch buttons2 ENG ENGLISH OPTICAL DIGITAL AUDIO OUT /DVI IN VIDEO 2 RGB IN (PC) AV IN 1 L/MONO AUDIO R
ASSEMBLING AND PREPARING 32LV2500, 32LV2520, LV3500, LV3520, LV5300, LW5000, LW5300, LV355C series Screen Remote control and intelligent1 sensors Power indicator Touch buttons2 Speakers CH VOL CH VOL ENTER ENTER HOME INPUT HOME INPUT (Other model) (LV5300 series) H USBIN IN USB ENGLISH ENG COMPONENT IN H/P AV IN 2 L VIDEO / AUDIO PR R 1 ANTENNA / CABLE IN AUDIO LAN 2 L/MONO AUDIO R / DVI IN VIDEO RS-232C IN(CONTROL & SERVICE) PB AV IN 1 RGB IN(PC) IN IN 33 Y (RGB/DVI)
ASSEMBLING AND PREPARING 17 LV3400 series Side Connection panel USB IN USB input Screen CH VOL Buttons2 ENTER HOME INPUT CH VOL Remote control and intelligent1 sensors Speakers Power indicator Y PR L 1 R 2 ANTENNA / CABLE IN AUDIO / DVI IN L/MONO AUDIO R RS-232C IN(CONTROL & SERVICE) VIDEO RGB IN(PC) PB AV IN VIDEO (RGB/DVI) AUDIO IN 2 1 Button2 Rear Connection panel (See p.75) Description /I Turns the power on or off. INPUT Changes the input source.
ASSEMBLING AND PREPARING 19/22/26LV2500, 26LV2520 series Screen HDMI input Remote control and intelligent1 sensors IN 3 USB input USB IN Side Connection panel Power indicator Headphone output Speakers CH PR VIDEO L ANTENNA / CABLE IN R AUDIO AUDIO L/MONO Rear Connection panel (See p.
ASSEMBLING AND PREPARING 19 LV255C series Side Connection panel USB IN USB input Screen IN 2 Remote control and intelligent1 sensors HDMI input Power indicator AV (Audio and Video) input AV IN 2 Speakers VOL CH ENG ENGLISH L AUDIO R AUDIO L/MONO SPEAKER OUT PR VIDEO RGB IN (PC) PB AV IN VIDEO DC-IN R / DVI IN Touch buttons2 INPUT COMPONENT IN AUDIO IN (RGB/DVI) RS-232C IN(CONTROL & SERVICE) HOME Y OPTICAL DIGITAL AUDIO OUT ENTER ANTENNA / CABLE IN Rear Connection panel
ASSEMBLING AND PREPARING LK450, LK451C, LK453C series Side Connection panel Headphone output AV (Audio and Video) input USB IN IN 3 HDMI input Remote control and intelligent1 sensors Power indicator VIDEO L/MONO AUDIO R USB input Screen Speakers VOL CH ENTER HOME Touch buttons2 INPUT AV IN 2 OPTICAL DIGITAL AUDIO OUT COMPONENT IN (RGB/DVI) AUDIO IN Y ENGLISH ENG 32/37/42/47LK450-UB ANTENNA / CABLE IN L R 1 PR 2 PB / DVI IN AUDIO RS-232C IN (CONTROL & SERVICE) VIDEO L/MONO
ASSEMBLING AND PREPARING 21 26LK330 Side Connection panel Screen USB IN CH USB input VOL Buttons2 ENTER HOME Headphone output IN 3 Remote control Speakers Power indicator AV IN 2 COMPONENT IN AUDIO IN (RGB/DVI) Y OPTICAL DIGITAL AUDIO OUT PR L Button2 ANTENNA / CABLE IN R 1 PB 2 AUDIO / DVI IN VIDEO L/MONO AUDIO R RS-232C IN (CONTROL & SERVICE) VIDEO AV IN 1 RGB IN (PC) ENG ENGLISH AV (Audio and Video) input INPUT VIDEO L/MONO AUDIO R HDMI input Rear Connection panel (S
ASSEMBLING AND PREPARING 32LK330 Side Connection panel Screen USB IN CH USB input VOL Buttons2 ENTER HOME Headphone output AV (Audio and Video) input IN 3 INPUT VIDEO L/MONO AUDIO R HDMI input Remote control and intelligent1 sensors Speakers Power indicator ENGLISH ENG AV IN 2 COMPONENT IN AUDIO IN (RGB/DVI) Y OPTICAL DIGITAL AUDIO OUT L Button2 ANTENNA / CABLE IN R 1 PR 2 PB / DVI IN AUDIO RS-232C IN (CONTROL & SERVICE) VIDEO L/MONO AUDIO R RGB IN (PC) VIDEO AV IN
ASSEMBLING AND PREPARING 23 LK430 series Side Connection panel Screen USB input USB IN CH VOL ENTER Buttons2 HOME Headphone output Speakers Power indicator AV IN 2 COMPONENT IN (RGB/DVI) AUDIO IN Y OPTICAL DIGITAL AUDIO OUT PR ANTENNA / CABLE IN L Rear Connection panel (See p.
ASSEMBLING AND PREPARING LK520 series Side Connection panel Screen USB input USB IN CH VOL ENTER Buttons2 HOME Headphone output AV (Audio and Video) input VIDEO L/MONO AUDIO R HDMI input IN 3 INPUT Remote control and intelligent1 sensors Speakers Power indicator AV IN 2 ENGLISH ENG COMPONENT IN (RGB/DVI) AUDIO IN Y OPTICAL DIGITAL AUDIO OUT ANTENNA / CABLE IN L Rear Connection panel (See p.
ASSEMBLING AND PREPARING 25 Lifting and moving the TV Setting up the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size. Put your TV on a pedestal stand and mount the TV on a table or wall. CAUTION Avoid touching the screen at all times, as yy this may result in damage to the screen. It is recommended to move the TV in the yy box or packing material that the TV originally came in.
ASSEMBLING AND PREPARING 3 Secure the TV and the stand with the 4 screws. To detach the stand, 1 Lay the TV with the screen side down on a flat Model Screw for assembly Number of screws 42/50PW340 42/50PW350 42/50PW350U 42/50PW350R 50PZ200 60PZ200 M4 x 26 4 M4 x 28 4 surface. 2 Remove the 4 screws and pull the stand away from the TV.
ASSEMBLING AND PREPARING 32LV2500, 32LV2520, LV3400, LV3500, LV3520, LV5300, LW5000, LW5300, LV355C series 3 Secure the TV and the stand with the 4 screws. Model 1 Lay the TV with the screen side down on a flat surface. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage. Make sure no objects press against the screen.
ASSEMBLING AND PREPARING 19/22/26LV2500, 26LV2520, LV255C series 1 Lay the TV with the screen side down on a flat surface. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage. Make sure no objects press against the screen. 2 Assemble the parts of the STAND BODY with the STAND BASE of the TV. Screw for assembly Number of screws M4 x 6 2 Stand Body ENGLISH ENG Stand Base 3 Secure the TV and the stand with the 2 screws.
ASSEMBLING AND PREPARING 29 LK330, LK430, LK450, LK451C, LK453C, To detach the stand, LK520 series 1 Lay the TV with the screen side down on a flat 1 Lay the TV with the screen side down on a flat surface. surface. 2 Remove the 4 screws and pull the stand away from the TV. CAUTION Lay a foam mat or soft protective cloth yy on the surface to protect the screen from damage. Make sure no objects press against the screen.
ASSEMBLING AND PREPARING Mounting on a table Securing the TV to a table 1 42LK451C, 32/37/42LK453C, 42LK520, (For 26/32LK330, 32/42LK430, 32/37/42LK450, Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. 32LV3520) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand.
ASSEMBLING AND PREPARING Securing the TV to a wall (optional) 31 Using the Kensington security system (optional) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table. 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
ASSEMBLING AND PREPARING Mounting on a wall Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. We recommend that you use an LG brand wall mount when mounting the TV to a wall.
ASSEMBLING AND PREPARING 33 Tidying cables PW340, PW350, PW350U, PW350R, PZ200 series 1 Install the power cord holder and power cord. It will help prevent the power cable from being removed by accident. 19/22/26LV2500, 26LV2520, 22/26LV255C series 1 Gather and bind the cables with the cable holder. Cable holder Power cord holder 2 Gather and bind the cables with the cable holder. 32LV2500, 32LV2520, LV3400, LV3500, LV3520, LV5300, LW5000, LW5300, LV355C series holder on the TV back cover.
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control.
ENERGY AV MODE INPUT TV SAVING 1 2 3 4 5 6 7 8 9 0 FLASHBK LIST REMOTE CONTROL MARK FAV VOL CH 3D P A G E MUTE ENERGY AV MODE INPUT INFO Home Q.MENU TV SAVING 1 4 7 BACK LIST VOL Adjusts the volume level. MARK Selects a menu or option. p.41)AV MODE INPUT FAV (SeeENERGY Accesses your favorite channel list. TV SAVING 2 ENTER 5 8 0 MARK FAV VOL 3 3D (For 3D TV) (See p.48) Used for viewing 1 3D 2 video. 3 6 RATIO (See4p.44) 5 Resizes an image. 9 7 8 MUTE Mutes all sounds.
4 5 6 REMOTE CONTROL 36 7 8 9 LIST 0 FLASHBK MARK FAV VOL CH 3D ENERGY AV MODE INPUT MUTE P A G E TV SAVING INFO 1 4 7 BACK LIST 2 3 5 6 8 9 ENTER 0 MARK CH TV MUTE 2 3 4 5 6 7 1 ENTER 9 3 FLASHBK 4 8 20 5 ENGLISH ENG RATIO MARK 7 VOL 3D FAV 8 0 MUTE INFO VOL TV RATIO (See p.44) Resizes an image. EXIT Clears all on-screen displays and returns to TV viewing.
7 INFO 8 9 Home Q.MENU ENERGY AV MODE INPUT FLASHBK LIST SAVING 1 VOL 0 2 3 CH 3D 5 7 Home Q.MENU 8 6 P A G E EXIT 9 3D SETTING ENERGY AV MODE INPUT LIST SAVING 1 VOL 4 BACK 7 INFO LIST 0 MARK ENTER FAV 2 RATIO 5 MUTE 8 MARK ENTER FAV VOL BACK INFO 3D MUTE 37 1 2 3 4 5 6 7 8 9 Control buttons 0 FLASHBK Controls the SIMPLINK compatible devices (USB,SIMPLINK). LIST FLASHBK FREEZE TV MARK RATIO 3 CH 6 FAV P A G E 9 RATIO (See p.
WATCHING TV WATCHING TV Connecting to an antenna or cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and a RF cable is optional. Connecting a cable box Connect the TV to a cable box and the cable box to a wall antenna socket with 2 RF cables (75 Ω). Connecting an antenna or basic cable Connect the TV to a wall antenna socket with an RF cable (75 Ω).
WATCHING TV Connecting to the AC/DC adapter (For 19/22/26LV2500, 26LV2520, 22/26LV255C) 39 3 Follow the on-screen instructions to customize your TV settings according to your preferences. Language Selects a language to display. Mode Setting Selects Home Use for the home environment. Power Indicator Sets the standby light. (For LED LCD TV) Time Zone AC/DC Adaptor Auto Tuning 1 Connect the AC/DC adapter plug to the power input jack on the TV.
WATCHING TV Watching TV Managing channels 1 In Standby mode, press the power button on the remote control to turn the TV on. 2 Press INPUT and select TV. 3 Control the TV using the following buttons while you are watching TV. Button Description CH (^, v) Scrolls through saved channels. LIST Selects a channel on the saved channel list. 0-9 Selects a channel by entering numbers. VOL (+, -) Adjusts the volume level. 1 MUTE Mutes all sounds.
WATCHING TV Using favorite channels Editing your channel list 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to CHANNEL and press ENTER. 3 Press the Navigation buttons to scroll to Channel Edit and press ENTER. 4 Edit channels using the following buttons. Button 41 Description Add the channels that you watch frequently to the favorite list. Setting up your favorite list 1 Select a channel to add to the favorite list. 2 Press FAV.
WATCHING TV Checking current program info Press ENTER to view the information of the currently program while you are watching. The following information appears at the top of the screen. Banner information 8-1 ꔖ DTV Program title End time Brief Info Title Test...
WATCHING TV ꔖ DTV 8-1 CNN Brief Info Title Test... 10:10 AM ꔀ Ch. Change ▶ Next 43 ꔉ Watch 11:40 AM ꔥ Multilingual ꔨ ꔯ Caption ꔷ 1080i ꔒ 14 TV-PG D L S V No information Sarah Bradley, Steve Gray and Brendon Pongia present the latest in fashion, the arts, entertainment, lifestyle and cooking, with regular and special guests.
WATCHING TV Using additional options - Adjusting aspect ratio Resize an image t at its optimal size by pressing RATIO while you are watching TV. Set By Program: Displays images in the same aspect ratio as the original image. (4:3 4:3 ) Set By Program NOTE You can also change the image size by yy pressing Q. MENU or accessing Aspect Ratio in the PICTURE menu. The available ratio varies depending on the yy input source. - The input sources: HDMI-PC and RGB-PC support 4:3 and 16:9.
WATCHING TV Changing AV modes Each AV mode has optimized image and sound settings. Press AV MODE repeatedly to select an appropriate mode. Mode Description Changes to the previously customized settings. Uses the optimized image and sound settings for a cinematic look. Uses the optimized image and sound settings for dynamic action sports. Uses the optimized image and sound settings for fast gaming. When playing a video game using PlayStation or Xbox. it is recommended to use the Game mode.
WATCHING TV Locking the buttons on the TV (Child Lock) Lock the buttons on the TV to prevent any unwanted operations or accidents by children. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to LOCK Using the quick menu Customize frequently used menus. 1 Press Q. MENU to access the quick menus. 2 Press the Navigation buttons to scroll through the following menus. ◀ and press ENTER. Aspect Ratio ▶ 3 Input password.
WATCHING TV 47 Using the customer support Testing the Picture / Sound To execute picture and sound tests. 1 Press Home to access the main menus. 2 Press the Red button to access Customer Support. 3 Press the Navigation buttons to scroll Picture Test or Sound Test and press ENTER. 4 If you have any problem, press the Navigation buttons to scroll to Yes and press ENTER. 5 When you are finished, press EXIT. When you return to the previous menu, press BACK.
3D IMAGING 3D IMAGING (FOR 3D TV) ( ) After powering on the TV, a few seconds yy may be needed for your TV to calibrate. The TV may flicker slightly if the 3D imaging yy is displayed under 3 wavelength fluorescent light (50 Hz - 60 Hz) or magnetic fluorescent lamp (50Hz - 60 Hz). In such instances, it is recommended to turn the lights off. If there is an obstacle between the TV and yy the 3D glasses, the 3D imaging may not display properly.
3D IMAGING 49 When using 3D Glasses CAUTION 3D glasses are sold separately. Refer to the yy 3D glasses manual for operating instructions. Do not use the 3D glasses to replace your yy corrective glasses, sunglasses or protective goggles. Do not store the 3D glasses in hot or cold yy locations. Do not drop objects onto the 3D glasses. Do yy not drop or bend the glasses. Since the lenses of the 3D glasses are yy easily scratched, make sure to clean only with a soft cloth.
3D IMAGING Viewing 3D Imaging View 2D mode for 3D images 1 Play the 3D video or select 3D channel. View 3D mode for 3D images 2 Press 3D and select same type in your 1 Play the 3D video or select 3D channel. (2D to 3D mode is available with all contents.) 2 Press 3D and select same type in your displayed picture on the screen. (Select type on “2D Video” tab.) 3D Video 2D Video displayed picture on the screen. (Select type on “3D Video” tab.
3D IMAGING 51 CAUTION Some menus may not work while watching yy the TV in 3D. The 3D imaging mode is disabled yy automatically when switching DTV channels. The screen may not be displayed properly yy if you view 2D DTV images in 3D imaging mode. 3D effect can be seen when 3D Mode is yy selected appropriately for the 3D input signal supplied to the TV. For *mpo files (3D camera files), the 3D yy imaging mode is enabled automatically. 3D may not be displayed properly for some yy PC graphics cards.
ENTERTAINMENT ENTERTAINMENT (Depending on model) Connecting USB storage devices IN 3 USB IN Connect USB storage devices such as a USB flash drive or external hard drive to the TV and use multimedia features (See "Browsing files" on p. 53). Connect a USB flash drive or USB memory card reader to the TV as shown in the following illustration. or A VIDEO L/MONO AUDIO R ENGLISH ENG To disconnect a USB storage device, make sure to end the connection properly to prevent damages to the TV or files.
ENTERTAINMENT Browsing files 1 Access the photo, music, or movie lists and browse files. 2 Page 1/1 Music List USB 1 XTICK 1 Connect a USB storage device. 53 Drive1 Page 1/1 001. - B01 .mp3 002. -B02.mp3 003. B03.mp3 004. - B04.mp3 00:00 00:00 00:00 00:00 3 4 005. - B05.mp3 00:00 2 Press Home to access the main menus. 3 Press the Navigation buttons to scroll to MY � Move MEDIA and press ENTER.
ENTERTAINMENT Type Supported File Formats Photo yyJPG yyAvailable size Baseline: 64 pixel (W) x 64 pixel (H) - 15360 pixel (W) x 8640 pixel (H) Progressive: 64 pixel (W) x 64 pixel (H) 1920 pixel (W) x 1440 pixel (H) * Do not use the progressive option when saving JPG files on your PC. yyIt may take some time to open highresolution images in full screen.
ENTERTAINMENT Viewing Videos 55 NOTE Your TV can display video files from a USB storage device. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. : Abnormal files are displayed using this yy graphic. yy : Non-supported files are displayed using this graphic. 7 Control playback by using the following buttons. 3 Press the Navigation buttons to scroll to Movie List and press ENTER. 4 Select Drive1 to access the connected USB storage device.
ENTERTAINMENT ENGLISH ENG The screen may suffer from temporary yy interruptions such as image stoppage or faster playback when you change the audio language. If you play a damaged video file, the video yy file may not be played correctly or some player functions may not be unavailable. The TV may not properly play the video files yy produced with certain encoders.
ENTERTAINMENT 57 NOTE When replaying a video file after stopping, yy select “Yes” to restart where it previously stopped. If continuous series files exist within the yy folder, the next file will automatically be played. But, this excludes cases when the Repeat function of Movie List Option is turned “On” (See p.56) or when set as Play Marked. Set Video. Allows you to change Video presets. (Refer to "PICTURE Settings" on p.65). Set Audio. Allows you to change Audio presets.
ENTERTAINMENT DivX registration code Registering the DivX code The DivX registration code allows you to rent or purchase the latest movies at www.divx.com/vod. To play a rented or purchased DivX file, the file’s registration code should be same as your TV’s DivX registration code. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 3 Press the Blue button. 4 Press the Navigation buttons to scroll to DivX VOD Registration and press ENTER.
ENTERTAINMENT Viewing Photos 59 NOTE You can view image files saved on a USB storage device. The displays on the screen may differ based on the model. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 3 Press the Navigation buttons to scroll to Photo yy : Abnormal files are displayed using this graphic. yy : Non-supported files are displayed using this graphic. 7 The following options are available while viewing photos. 01_a.
ENTERTAINMENT NOTE Option values changed in Photo List do not yy affect Movie List and Music List. Option values changed in Photo List or yy Music List are changed likewise in Photo List and Music List, but not Movie List. Q.MENU options for photo list 1 Press Q. MENU. A pop-up window will appears. 2 Press the Navigation buttons to scroll to photo list option and press ENTER. 3 Press the Navigation buttons to scroll to one of the following options and press ENTER. Set Photo View.
ENTERTAINMENT Listening to music NOTE 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press ENTER. 3 Press the Navigation buttons to scroll to Music List and press ENTER. 4 Select Drive1 to access the connected USB storage device. 5 Press the Navigation buttons to scroll to a folder/file you want and press ENTER. 6 Play music by using the following menus/ buttons. Page 1/1 Music List USB 1 XTICK Drive1 001. - B01 .mp3 00:00 Page 1/1 002. -B02.
ENTERTAINMENT Q.MENU options for music list 1 Press Q. MENU. A pop-up window will appears. 2 Press the Navigation buttons to scroll to music list option and press ENTER. 3 Press the Navigation buttons to scroll to one of the following options and press ENTER. NOTE Option values changed in Movie List does yy not affect the Photo List and Music List. Option value changed in Photo List and yy Music List are changed likewise in Photo List and Music List. Set Audio Play. Select Repeat or Random option.
CUSTOMIZING SETTINGS 63 CUSTOMIZING TV SETTINGS The Main Menus 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to one of the following menus and press ENTER. 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER. 4 When you are finished, press EXIT. Menu (Depending on model) Description Sets up and edit channels. PICTURE Adjusts the image size, quality, or effect. AUDIO Adjusts the sound quality, effect, or volume level.
CUSTOMIZING SETTINGS Customizing Settings CHANNEL Settings 1 Press Home to access the main menus. CHANNEL 2 Press the Navigation buttons to scroll to CHANNEL and press ENTER. • Auto Tuning • Manual Tuning • Channel Edit 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. The available channel settings are described in the following.
CUSTOMIZING SETTINGS 65 PICTURE Settings 1 Press Home to access the main menus. PICTURE 2 Press the Navigation buttons to scroll to CHANNEL and press • Aspect Ratio ENTER. ꔂ Move ꔉ Enter : 16:9 • Picture Wizard • ꕊ Energy Saving : Off 3 Press the Navigation buttons to scroll to the setting or option you want and press ENTER. - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS Setting Picture Mode Description Selects one of the preset image or customizes options in each mode for the best TV screen performance. You are also able to customize advanced options of each mode. The available preset picture modes vary depending on the TV. Mode Intelligent Sensor ( LCD ) Sets the TV to adjust the image settings, such as contrast, brightness, sharpness, color, or tint, automatically corresponding to the surrounding environments.
CUSTOMIZING SETTINGS 67 Basic Image Options Setting Backlight ( LCD ) Description Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. NOTE yyIf you use the “Energy saving - Off, Minimum, Medium”, Backlight will be available. Contrast Increases or decreases the amplitude of the video signal.
CUSTOMIZING SETTINGS Setting Color Gamut Description Advanced Control Maximizes the utilization of color to increase color quality. »»Standard: Displays standard set of colors. »»Wide: Increase number of colors used. Expert Control Displays color domain of the signal. »»Standard: Displays standard set of colors. »»Wide: Increase number of colors used. »»EBU: Mode to display EBU standard color area. ( LCD ) »»SMPTE: Mode to display SMPTE standard color area.
CUSTOMIZING SETTINGS AUDIO Settings 1 Press Home to access the main menus. AUDIO ꔂ Move 2 Press the Navigation buttons to scroll to AUDIO and press ENTER. • Auto Volume : Off • Clear Voice II : Off � 3 3 Press the Navigation buttons to scroll to the setting or option you • Balance want and press ENTER. - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS TIME Settings 1 Press Home to access the main menus. TIME ꔂ Move 2 Press the Navigation buttons to scroll to TIME and press ENTER. • Clock • Off Time : Off 3 Press the Navigation buttons to scroll to the setting or option you • On TIme : Off • Sleep Timer : Off want and press ENTER. - To return to the previous level, press BACK. ꔉ Enter 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS LOCK Settings 1 Press Home to access the main menus. LOCK ꔂ Move 2 Press the Navigation buttons to scroll to LOCK and press ENTER. • Set Password 3 Press the Navigation buttons to scroll to the setting or option you • Lock System : On • Block Channel • Movie Rating • TV Rating-Children • TV Rating-General • Downloadable Rating want and press ENTER. - To return to the previous level, press BACK. 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS Setting TV RatingGeneral (Depending on model) Description Blocks the TV programs that you want based on the ratings by using the Parental Control Function (V-Chip). NOTE yy The V-Chip electronically reads TV program ratings and allows parents to block program that are unsuitable for children.
CUSTOMIZING SETTINGS OPTION Settings 1 Press Home to access the main menus. OPTION ꔂ Move 2 Press the Navigation buttons to scroll to OPTION and press ENTER. • Language • Caption : Off 3 Press the Navigation buttons to scroll to the setting or option you • ISM Method : Normal want and press ENTER. - To return to the previous level, press BACK. ꔉ Enter • Power Indicator • Initial Setting • Set ID :1 • Mode Setting : Home Use 4 When you are finished, press EXIT.
CUSTOMIZING SETTINGS Setting ISM Method ( ) Plasma Description Prevents image sticking or removes a ghost image. A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. Mode Normal Sets it if image sticking is never a problem. Orbiter Avoids a ghost image on the screen. The image will move every 2 minutes to help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. Color Wash Removes a ghost image on the screen.
MAKING CONNECTIONS 75 MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS Connection Overview Connect various external devices to the ports on the TV back panel. 1 Find an external device you want to connect to your TV as shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details. HD Receiver Speaker ENGLISH ENG PC DVD VCR USB Gaming device HDMI – See p.77 DVI – See p.77 Component – See p.78 Composite – See p.78 Digital – See p.81 RGB – See p.
MAKING CONNECTIONS Connecting to a HD receiver, DVD or VCR player Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode. DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.
MAKING CONNECTIONS Component Connection Composite Connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown in the following illustration. Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration.
MAKING CONNECTIONS Connecting to a PC 79 DVI to HDMI Connection NOTE It is recommended to use the TV set with yy the HDMI connection for the best image quality. HDMI Connection Transmits the digital video signal from your PC to the TV. Connect the PC and the TV with the DVIHDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. PW350 series Transmits the digital video and audio signals from your PC to the TV.
MAKING CONNECTIONS RGB Connection NOTE Transmits the analog video signal from your PC to the TV. Connect the PC and the TV with the D-sub 15 pin signal cable as shown in the following illustrations. To transmit an audio signal, connect an audio cable.
MAKING CONNECTIONS Connecting to an Audio System 81 Connecting to a USB (Not support for PZ200 series) Use an optional external audio system instead of the built-in speaker. Connect a USB storage device such as a USB flash memory, external hard drive or a USB memory card reader to the TV and access the My media menu to use various multimedia files. See "Connecting USB storage devices" on p.52 and "Browsing files" on p. 53.
MAKING CONNECTIONS SIMPLINK Connection Use the TV remote control to play and control the AV device connected with the HDMI cable through HDMI-CEC. Your TV only works with the devices that support HDMI-CEC. But only devices with the logo are fully supported. Connect one end of the HDMI cable to the HDMI/ DVI IN or HDMI IN terminal on the rear of the TV and the other end to the SIMPLINK device. NOTE If the connected device does not support yy HDMI-CEC, the SIMPLINK feature is unavailable.
MAINTENANCE MAINTENANCE Update and clean your TV regularly to keep the best performance and to extend the product lifespan. Cleaning Your TV CAUTION Make sure to turn the power off and yy disconnect the power cord and all other cables first. When the TV is left unattended and unused yy for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. 83 CAUTION Do not spray liquid onto the surface.
TROUBLESHOOTING TROUBLESHOOTING General Problem Resolution Cannot control the TV with the remote control. yyCheck the remote control sensor on the product and try again. yyCheck if there is any obstacle between the product and the remote control. to ). yyCheck if the batteries are still working and properly installed ( to , yyCheck if the appropriate input mode such as TV or VCR is set for using the remote control. No image display and no sound is produced. yyCheck if the product is turned on.
TROUBLESHOOTING 85 Video Problem Resolution An image displays in black and white or the color quality is poor. yyAdjust the color setting in the menu option. yyKeep a sufficient distance between this product and other electronic products. yyScroll to other channels. There may a problem with the broadcast. Horizontal or vertical bars appears or images blur yyCheck if there are local interferences such as an electrical appliance or power tool.
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS 42LW5000 (42LW5000-UC) MODELS Dimensions (W x H x D) Weight With stand 998.0 mm x 684.0 mm x 256.0 mm (39.2 inch x 26.9 inch x 10.0 inch) Without stand 998.0 mm x 615.0 mm x 30.4 mm (39.2 inch x 24.2 inch x 1.1 inch) With stand 15.5 kg (34.1 lbs) Without stand 13.3 kg (29.3 lbs) Current Value / Power consumption 1.
SPECIFICATIONS 32LV2500 (32LV2500-UA) 32LV2500 (32LV2500-UG) MODELS 32LV2520 (32LV2520-UC) 32LV2520 (32LV2520-UJ) Dimensions (W x H x D) Weight With stand 777.0 mm x 552.0 mm x 234.0 mm (30.5 inch x 21.7 inch x 9.2 inch) Without stand 777.0 mm x 501.0 mm x 35.4 mm (30.5 inch x 19.7 inch x 1.3 inch) With stand 11.9 kg (26.2 lbs) Without stand 10.7 kg (23.5 lbs) Current Value / Power consumption Power requirement 0.
SPECIFICATIONS 42LV3500 (42LV3500-UA) 47LV3500 (47LV3500-UA) 42LV3500 (42LV3500-UG) MODELS 89 42LV3520 (42LV3520-UC) 42LV3520 (42LV3520-UJ) 47LV3500 (47LV3500-UG) 42LV355C (42LV355C-UA) Dimensions (W x H x D) Weight With stand 998.0 mm x 684.0 mm x 256.0 mm 1108.0 mm x 746.0 mm x 256.0 mm (39.2 inch x 26.9 inch x 10.0 inch) (43.6 inch x 29.3 inch x 10.0 inch) Without stand 998.0 mm x 615.0 mm x 30.4 mm 1108.0 mm x 677.0 mm x 30.4 mm (39.2 inch x 24.2 inch x 1.1 inch) (43.6 inch x 26.6 inch x 1.
SPECIFICATIONS MODELS Dimensions (W x H x D) Weight 663.0 mm x 423.0 mm x 79.9 mm 800.0 mm x 509.0 mm x 73.8 mm (26.1 inch x 16.6 inch x 3.1 inch) (31.4 inch x 20.0 inch x 2.9 inch) With stand 7.3 kg (16.0 lbs) 9.2 kg (20.2 lbs) Without stand 6.2 kg (13.6 lbs) 8.2 kg (18.0 lbs) 1.0 A / 100 W 1.2 A / 120 W AC100 - 240 V ~ 50/60 Hz 42LK430 (42LK430-UA) 32LK430 (32LK430-UG) 42LK430 (42LK430-UG) 799.0 mm x 555.0 mm x 207.0 mm 1023.0 mm x 685.0 mm x 261.0 mm (31.4 inch x 21.8 inch x 8.
SPECIFICATIONS MODELS 42LK450 (42LK450-UB) 47LK450 (47LK450-UB) 42LK450 (42LK450-UH) 47LK451C (47LK451C-UB) 42LK451C (42LK451C-UB) 47LK450 (47LK450-UH) 42LK453C (42LK453C-UB) Dimensions (W x H x D) Weight With stand 1019.0 mm x 698.0 mm x 265.0 mm 1132.0 mm x 762.0 mm x 265.0 mm (40.1 inch x 27.4 inch x 10.4 inch) (44.5 inch x 30.0 inch x 10.4 inch) Without stand 1019.0 mm x 631.0 mm x 76.5 mm (40.1 inch x 24.8 inch x 3.0 inch) 15.1 kg (33.2 lbs) 19.0 kg (41.8 lbs) Without stand 13.4 kg (29.
SPECIFICATIONS RGB (PC), HDMI (PC) supported mode ( Resolution Plasma ) Horizontal Vertical Frequency (KHz) Frequency (Hz) 720x400 31.469 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1360x768 47.712 60.015 1280x1024 63.981 60.02 1920x1080 RGB-PC 66.587 59.934 1920x1080 HDMI-PC 67.5 60.00 HDMI (DTV) supported mode ( Resolution Plasma ) LCD Horizontal Vertical Frequency (KHz) Frequency (Hz) 720x480p 31.47 31.50 59.94 60.00 1280x720p 44.96 45.
SPECIFICATIONS 93 Video Supported Formats (Depending on model) File Video Decoder Extension name Audio Codec mpg, mpeg MPEG1, MPEG2 MP2, MP3, Dolby Digital, LPCM dat MPEG1 MP2 ts, trp, tp MPEG2, H.264, AVS, VC1 MP2, MP3, Dolby Digital, AAC, HE-AAC vob MPEG1, 2 MP2, MP3, Dolby Digital, LPCM mp4, mov MPEG4,DivX 3.11, DivX 4.12, DivX 5.x, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10-beta1/2H.264 AAC, HE-AAC, MP3 mkv H.
IR CODES IR CODES (Depending on model) How to Connect Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes Output waveform Single pulse, modulated with 37.917kHz signal at 455kHz Tc T1 Frame configuration 1st frame Lead code Low custom code High custom code Data code Data code ENGLISH ENG C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame Repeat code Tf Lead code 9 ms 4.
IR CODES Code (Hexa) Function Note Code (Hexa) Function 95 Note POWER Remote control Button (Power On/Off) 0F TV Remote control Button DC 3D Remote control Button 45 Q.
EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Type of connector; D-Sub 9-Pin Male 1 5 6 9 RS-232C IN (CONTROL & SERVICE) RS-232C IN (CONTROL & SERVICE) No.
EXTERNAL CONTROL DEVICE SETUP RS-232C configurations Set ID Set ID number. 7-Wire Configuration (Serial female-female NULL modem cable) PC OPTION TV ꔂ Move ꔉ Enter • Language RXD 2 3 TXD TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS CTS 8 7 RTS D-Sub 9 97 D-Sub 9 • Caption : Off • Power Indicator • Initial Setting • Set ID :1 • Mode Setting : Home Use ꔉ ꔀ 1 Press Home to access the main menus.
EXTERNAL CONTROL DEVICE SETUP Communication Parameters Stop bit: 1 bit yy Communication code: ASCII code yy Use a crossed (reverse) cable. yy Baud rate: 9600 bps (UART) yy Data length: 8 bits yy Parity : None yy Command reference list COMMAND1 01. Power COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 DATA (Hexadecimal) ENGLISH ENG k a 00 - 01 14. Treble k r 00 - 64 02. Input Select x b (See p.100) 15. Bass k s 00 - 64 03. Aspect Ratio k c (See p.100) 16.
EXTERNAL CONTROL DEVICE SETUP 99 Transmission / Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired set ID number in Option menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected the set is controlled.
EXTERNAL CONTROL DEVICE SETUP 01. Power (Command: k a) To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this model, set will send the Acknowledge after power on processing completion.
EXTERNAL CONTROL DEVICE SETUP 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 13. Remote Control Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set.
EXTERNAL CONTROL DEVICE SETUP 20. ISM Method (Command: j p) ( ) To avoid having a fixed image remain on screen. Plasma Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 02: Orbiter 04: White Wash 08: Normal 20: Color Wash Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 21. Energy Saving (Command: j q) To control the energy saving function.
EXTERNAL CONTROL DEVICE SETUP 103 * Table List (Channel Tuning) 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 Reserved 3 2 1 0 Step 0 Main 0 Two 0 Use x 0 0 0 0 NTSC Air 1 Sub 1 One 1 No Use x 0 0 0 1 NTSC Cable x 0 0 1 0 ATSC Air x 0 0 1 1 ATSC Cable_std x 0 1 0 0 ATSC Cable_hrc x 0 1 0 1 ATSC Cable_irc x 0 1 1 0 ATSC cable_auto x 0 1 1 1 Reserved x x x x x ...
OPEN SOURCE LICENSE OPEN SOURCE LICENSE Open source software notice Please be informed that LG Electronics products may contain open source software listed in the tables below. ENGLISH ENG License Component OpenSSL license - openssl MIT license - libcurl - ncurses expat license - expat Freetype license - freetype JPEG license - libjpeg Zlib/libpng license - libmng - libpng - md5 checksum - tinyxml - zlib X.
OPEN SOURCE LICENSE 105 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
OPEN SOURCE LICENSE 1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
OPEN SOURCE LICENSE 107 The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable.
OPEN SOURCE LICENSE applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10.
OPEN SOURCE LICENSE 109 surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code.
OPEN SOURCE LICENSE A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The “Library”, below, refers to any such software library or work which has been distributed under these terms.
OPEN SOURCE LICENSE 111 Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License.
OPEN SOURCE LICENSE or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library.
OPEN SOURCE LICENSE 113 ditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all.
OPEN SOURCE LICENSE END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library.
OPEN SOURCE LICENSE 115 Mozilla Public License 1.1 (MPL 1.1) 1. Definitions. 1.0.1. “Commercial Use” means distribution or otherwise making the Covered Code available to a third party. 1.1. ‘’Contributor’’ means each entity that creates or contributes to the creation of Modifications. 1.2. ‘’Contributor Version’’ means the combination of the Original Code, prior Modifications used by a Contributor, and the Modifications made by that particular Contributor. 1.3.
OPEN SOURCE LICENSE 1.11. ‘’Source Code’’ means the preferred form of the Covered Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differential comparisons against either the Original Code or another well known, available Covered Code of the Contributor’s choice.
OPEN SOURCE LICENSE 117 3. Distribution Obligations. 3.1. Application of License. The Modifications which You create or to which You contribute are governed by the terms of this License, including without limitation Section 2.2. The Source Code version of Covered Code may be distributed only under the terms of this License or a future version of this License released under Section 6.1, and You must include a copy of this License with every copy of the Source Code You distribute.
OPEN SOURCE LICENSE 3.6. Distribution of Executable Versions. You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligations of Section 3.2.
OPEN SOURCE LICENSE 119 PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. 8. TERMINATION. 8.1.
OPEN SOURCE LICENSE 11. MISCELLANEOUS. This License represents the complete agreement concerning subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions.
OPEN SOURCE LICENSE 121 OpenSSL License Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
OPEN SOURCE LICENSE 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)” The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-). 4.
OPEN SOURCE LICENSE 123 Except as contained in this notice, the name(s) of the above copyright holders shall not be used in advertising or otherwise to promote the ale, use or other dealings in this Software without prior written authorization. Expat license The source package was downloaded from . The original packager is Adam Di Carlo . The current maintainer is Ardo van Rangelrooij .
OPEN SOURCE LICENSE thus encourage you to use the following text: Portions of this software are copyright The FreeType Project (www.freetype.org). All rights reserved. Please replace with the value from the FreeType version you actually use. Legal Terms 0.
OPEN SOURCE LICENSE 125 Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc. Our home page can be found at http://www.freetype.org JPEG license This software is copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved except as specified below.
OPEN SOURCE LICENSE tation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation.
OPEN SOURCE LICENSE 127 claimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the names of PolarSSL or XySSL nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
The model and serial numbers of the TV is located on the back of the TV Record it below should you ever need service.
