Owner's Manual

79
ENGENGLISH
CUSTOMIZING SETTINGS
Setting Description
Country Selects a desired country.

If you do not finish the set-up Installation Guide by pressing BACK or if you time out on
the OSD (On Screen Display) the installation menu will continuously appear until the set
up is completed whenever the TV is switched on.

If you select the wrong local country, teletext may not appear correctly on the screen
and some problems may occur during teletext operation.

The CI (Common Interface) function may not be applied based on country broadcasting
circumstances.

DTV mode control buttons may not function based on country broadcasting
circumstances.

In country that Digital broadcasting regulation isn’t fixed, some DTV function may not
work depending on digital broadcasting circumstances.

The Country Setting “UK” should only be activated in UK.

If the country setting is set to “--”, European terrestrial digital standard broadcasting
programmes are available, but some DTV functions may not work properly.
NOTE
Disabled Assist-
ance (In Digital
Mode only)
Option
Hard of Hearing This function if for the hearing impaired.
Audio Description This function is for the blind, and provides explanatory audio describ-
ing the current situation in a TV programme in addition to the basic
audio.
When Audio Description On is selected, basic audio and Audio
Description are provided only for those programmes that have Audio
Description included.
Volume Changes the Audio Description volume
Beep Beeps when a programme with Audio Description infor-
mation is selected
ISM Method
(Only Plasma TV)
A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image
remaining even when you change the image. Avoid allowing a fixed image to remain on the
screen for prolonged periods.
Option
White Wash White wash removes permanent images from the screen.
Note: An excessive permanent image may be impossible to clear
entirely with White Wash.
Orbiter Orbiter may help prevent ghost images. However, it is best not to allow
any fixed image to remain
on the screen. To avoid a permanent image on the screen, the screen
will move every 2 minutes.
Colour Wash The colour block with the screen moved a little and the white pattern
are alternately displayed. It is difficult to sense the afterimage occurred
while the temporary afterimage is removed and the colour pattern is
operating.