Manual

EXTERNALCONTROLTHROUGHRS-232C

- Except 32/37/42/47/52LG60, 42/47LGX

The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer

or an #u/V control system) to control the TV's functions externally.

01_Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software.

The instructions below are provided to help with programming software or to test functionality using telenet

software.

RS-232C Setup

i.e)

Type of Connector; D-Sub 9-Pin Male

No connection

RXD (Receive data)

TXD (Transmit data)

DTR (DTE side ready)

GND

DSR (DCE side ready)

RTS (Ready to send)

CTS (Clear to send)

No Connection

@ @

Communication Parameters

01_Baud rate : 9600 bps (UART)

01_Data length : 8 bits

01_Parity : None

01_Stop bit : 1 bit

01_Communication code : ASCII code

01_Use a crossed (reverse) cable.

1 29