Owner’s Manual

35
Installation
*
Adjustment
for screen
Position, Size,
and Phase
*
Initializing (Reset
to
original factory values)
-
To initialize the
adjusted
values
Close
POSITION
G
SIZE
PHASE
RESET
Adjust
D
F G
E
Close
POSITION
SIZE
PHASE
RESET
G
Adjust
Initialize
Settings
Position This function is to
adjust
picture
to
left/right
and
up/down
as
you prefer.
Size This function is to mini-
mize
any
vertical bars or
stripes
visible on the
screen
background.
And
the horizontal screen size
will also
change.
Phase This function allows
you
to
remove
any
horizontal
noise and clear or
sharpen
the
image
of characters.
Mini
Glossary
-
When RGB connect to PC
input
and select the RGB-PC in Main
Input,
this function is used.
-
When HDMI/DVI connect to PC
input
and select HDMI/DVI
input,
this function is used.
-
In RGB-DTV
mode,
SIZE and PHASE is not available.
-
In HDMI/DVI-PC
mode,
PHASE is not available.
-
After
connecting
RGB-PC or HDMI/DVI to PC
input
and
checking
the screen
quality.
Press the ADJUST button and then use D
/
E
button to select
POSITION,
SIZE,
or
PHASE.
Press ENTER button and then use D
/
E
/
F
/
G
buttons to make
appro-
priate adjustments.
?
The
PHASE
adjustment range
is -16
~
+16.
?
The
SIZE
adjustment range
is -50
~
+50.
Press ENTER button.
1
2
3
Press the ADJUST button and then use
D/E
button to select the
RESET
option.
Press ENTER button and then use
F
/
G
button to select
Yes
.
Press ENTER button.
1
2
3
Screen
Setup
for PC mode