Installation Manual

ENGLISH
22
DTV Channel Update
-
It is a mode to set whether to update DTV Channel automatically or not.
-
When is set to ‘Auto’, the function to update TV’s Channel map according to DTV Channel’s stream information.
-
When is set to ‘Manual’, the function to keep TV’s Channel map even though DTV Channel’s information is changed.
Power On Default
-
Set the channel to display and Volume Level, etc. when turn on power.
-
When is set to Off, it is not applied to the subordinate Input, Channel, A/V Setting, Aspect Ratio menu.
-
When is set to On, it can set by entering the subordinate menu.
Input
-
Set whether it is turned on by the set input source or by the last stored input source.
Channel
-
Select start channel number if Input source’s value is TV.
A/V Setting
-
If ‘A/V Setting’ is changed from ‘Off’ to ‘On’, A/V parameters that are set before entering ‘Installation Menu’ are applied whenever turn on
power.
Aspect Ratio
-
The aspect ratio determines the default aspect ratio that the set returns to on power up.
Aux Source Setting
-
Set to On or Off.
-
The Auxiliary (Input) Source Setting feature will enable or disable for each external input.
-
User cannot disable the current input.
Power Management
• The Power Management feature will turn o the TV if no input control command is received from either the Local or IR Key within a selected
hours.
-
Activity on either of these inputs shall reset the ‘Power Management’ timer.
-
This entry can be set to a value which is corresponding to the desired hours (1Hour to 7Hours).
-
Default value is 'Off'
Factory Reset
-
Change all settings to their default values.