Owner's Manual

20
ENG
ENGLISH
ASSEMBLING AND PREPARING
Adjusting the angle of the TV to suit view
(Only 32/42CS46**, 32/42CS47**, 32/42LS34**,
32/42LM34**)
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
2020
CAUTION

When adjusting the angle of the product,
watch out for your fingers.
»
Personal injury may occur if hands
or fingers are pinched. If the product
is tilted too much, it may fall, causing
damage or injury.
Securing the TV to a table
(Only 26/32/42CS46**, 26/32/42CS47**,
32/42LS34**, 32/42LM34**)
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
WARNING

To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
at surface.
CAUTION

Make sure that children do not climb on or
hang on the TV.
NOTE

Use a platform or cabinet that is strong and
large enough to support the TV securely.

Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.