Owner’s Manual

ENGLISH
17
ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
(Depending on model)
1
Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to
the wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets
tightly with a sturdy rope or cable.
Make sure to keep the rope parallel to the
flat surface.

Make sure that children do not climb on or
hang on the TV.
CAUTION

Use a platform or cabinet that is strong and
large enough to support the TV securely.

Brackets, bolts and ropes, are optional. You
can obtain additional accessories from your
local dealer.
NOTE
Tidying cables
1
Install the cable holder as shown.
Cable Holder
2
Gather and bind the cables with the cable
holder.
Cable Holder

Do not move the TV by holding the cable
holder, as the cable holders may break, and
injuries and damage to the TV may occur.

When attaching a wall mount bracket to the
TV, the Cable holder hole is located on the
TV back cover.
or
Cable Holder Hole
CAUTION