Instruction Manual

A-5
SETTING UP THE TV
CAUTION
y
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screenfromscratches.
y
Make sure that the screws are inserted
correctlyandfastenedsecurely.(Iftheyare
not fastened securely enough, the TV may
tiltforwardafterbeinginstalled.)
Do not use too much force and over tighten
the screws; otherwise screw may be
damagedandnottightencorrectly.
NOTE
y
Removing the protective film (from the
bottom)
(Depending on model)
Protective film is temporarily attached to
prevent the surface of the product from
beingdamagedduringdelivery.
Once the TV has been installed, please
remove the protective film on the bottom of
theunitasshowninthefigure.
y
Remove the stand before installing the TV
on a wall mount by performing the stand
attachmentinreverse.
LN57**-ZA
2
3
1
Stand Body
Stand Base
P5 x 25
3EA
M4 x 14
4EA