OWNER’S MANUAL LED LCD TV / LCD TV Please read this manual carefully before operating your set and retain it for future reference. LED LCD TV MODELS LCD TV MODELS 32LS3400 32LS3450 22LS3500 22LS3510 42LS3400 42LS3450 26LS3500 26LS3510 32LS3500 32LS3510 32CS460 32CS560 32CS461 37CS560 42CS530 42CS560 P/NO : MFL67468111 (1206-REV05) www.lg.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. yy TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on yy or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified yy by the manufacturer. Use only with a cart, stand, tripod, bracket, yy or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
IMPORTANT SAFETY INSTRUCTIONS Warning - To reduce the risk of fire or yy electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. Do not expose to dripping or splashing and yy do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
IMPORTANT SAFETY INSTRUCTIONS Never touch this apparatus or antenna during yy a thunder or lightning storm. When mounting a TV on the wall, make sure yy not to install the TV by hanging the power and signal cables on the back of the TV. Do not allow an impact shock or any objects yy to fall into the product, and do not drop anything onto the screen. Dot Defect yy The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels.
IMPORTANT SAFETY INSTRUCTIONS DISPOSAL (Hg lamp only used in LCD TVs) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.
IMPORTANT SAFETY INSTRUCTIONS For USA and Canada FCC NOTICE NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH 2 IMPORTANT SAFETY INSTRUCTIONS 7 Additional information of the manual 8 TABLE OF CONTENTS 9 INSTALLATION PROCEDURE 9 ASSEMBLING AND PREPARING 9 15 18 19 19 25 27 28 Unpacking Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand - Mounting on a table - Mounting on a wall - Tidying cables 29 MAKING CONNECTIONS 29 30 Connecting to an antenna or cable Connecting to a HD receiver, DVD, or VCR player - HDMI Connection
ASSEMBLING AND PREPARING 9 INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
ASSEMBLING AND PREPARING For CS460, CS461, LS3400 series Owner’s manual, CD manual Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Stand Body (See p.19) Stand Base (See p.19) Stand Screws 8 EA, M4 x 20 (See p.19) Protection cover Desk-mount Screw (See p.25) Power Cord ENGLISH Remote control, Batteries (AAA) (See p.
ASSEMBLING AND PREPARING 11 For LS3450 series Owner’s manual, CD manual (for 32LS3450) (for 42LS3450) Stand Body / Stand Base (See p.20) Stand Body / Stand Base (See p.21) (for 32LS3450) (for 42LS3450) Stand Screws 2 EA, P4 x 16 4 EA, M4 x 20 (See p.20) Stand Screws 4 EA, P4 x 16 4 EA, M4 x 14 (See p.21) (for 32LS3450) Protection cover Cable holder (See p.28) Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Desk-mount Screw (See p.
ASSEMBLING AND PREPARING For CS530, CS560 series Owner’s manual, CD manual Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Stand Body (See p.22) Stand Base (See p.22) Stand Screws 8 EA, M4 x 20 (See p.22) ENGLISH Remote control, Batteries (AAA) (See p.35) (For 42CS530, 32/42CS560) Protection cover (For 37CS560) Power Cord Desk-mount Screw (See p.
ASSEMBLING AND PREPARING 13 For 22/26LS3500, 22/26LS3510 Remote control, Batteries (AAA) (See p.35) Owner’s manual, CD manual Polishing cloth (Depending on model) Use this to remove dust from the cabinet. (For 22LS3500, 22LS3510) Stand Body (See p.23) Stand Screws 2 EA, P4 x 16 (See p.23) Cable holder (See p.28) Power Cord (For 26LS3500, 26LS3510) Stand Screws 2 EA, M4 x 14 (See p.23) AC/DC Adapter ENGLISH Stand Base (See p.
ASSEMBLING AND PREPARING For 32LS3500, 32LS3510 Owner’s manual, CD manual Polishing cloth (Depending on model) Use this to remove dust from the cabinet. Stand Body (See p.24) Stand Base (See p.24) Stand Screws 4 EA, P4 x 16 4 EA, M4 x 14 (See p.24) Desk-mount Screw (See p.25) Cable holder (See p.28) Power Cord ENGLISH Remote control, Batteries (AAA) (See p.
ASSEMBLING AND PREPARING 15 Parts and buttons For CS460, CS461, CS530, CS560, LS3400 series Screen Remote control and Intelligent sensors1 Power indicator OK SETTINGS INPUT For CS460, CS461, LS3400 series Touch buttons2 OK SETTINGS Touch button2 INPUT For CS530, CS560 series Description ꔰ/I Turns the power on or off. INPUT Changes the input source. SETTINGS Accesses the main menus, or saves your input and exits the menus. OK ⊙ Selects the highlighted menu option or confirms an input.
ASSEMBLING AND PREPARING For LS3450 series Screen buttons OK OK SETTINGS INPUT SETTINGS ENGLISH INPUT Speakers Remote control and intelligent sensors1 Power indicator Touch button2 ꔰ Description Turns the power on or off. Changes the input source. HINPUT SETTINGS S Accesses the main menus, or saves your input and exits the menus. OK Selects the highlighted menu option or confirms an input. H - + Adjusts the volume level. v ^ Scrolls through the saved channels.
ASSEMBLING AND PREPARING 17 For LS3500, LS3510 series Screen Remote control and Intelligent sensors1 Power indicator ENGLISH Speakers OK SETTINGS INPUT Touch button2 Touch buttons2 Description ꔰ/I Turns the power on or off. INPUT Changes the input source. SETTINGS Accesses the main menus, or saves your input and exits the menus. OK ⊙ Selects the highlighted menu option or confirms an input. - + Adjusts the volume level. v ^ Scrolls through the saved channels.
ASSEMBLING AND PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. CAUTION When transporting a large TV, there should yy be at least 2 people. When transporting the TV by hand, hold the yy TV as shown in the following illustration. Avoid touching the screen at all times, as yy this may result in damage to the screen.
ASSEMBLING AND PREPARING 19 Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. For CS460, CS461, LS3400 series 1 2 4 EA M4 x 20 Stand Body CAUTION Stand Base 3 When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
ASSEMBLING AND PREPARING For 32LS3450 1 2 2EA P4 x 16 Stand Body Stand Base ENGLISH CAUTION 3 When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 4 EA M4 x 20 CAUTION Make sure that the screws are fastened yy completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING 21 For 42LS3450 1 2 4EA P4 x 16 Stand Body Stand Base When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 3 4EA M4 x 14 CAUTION NOTE Remove the stand before installing the TV yy on a wall mount by performing the stand attachment in reverse. Make sure that the screws are fastened yy completely.
ASSEMBLING AND PREPARING For CS530, CS560 series 1 2 4 EA M4 x 20 Stand Body Front ENGLISH CAUTION Stand Base 3 When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 4 EA M4 x 20 CAUTION NOTE Remove the stand before installing the TV yy on a wall mount by performing the stand attachment in reverse. Make sure that the screws are fastened yy completely.
ASSEMBLING AND PREPARING 23 For 22/26LS3500, 22/26LS3510 1 2 Stand Body Stand Base 3 (For 22LS3500, 22LS3510) 2 EA P4 x 16 (For 26LS3500, 26LS3510) 2 EA M4 x 14 CAUTION NOTE Remove the stand before installing the TV yy on a wall mount by performing the stand attachment in reverse. Make sure that the screws are fastened yy completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING For 32LS3500, 32LS3510 1 2 Stand Body 4 EA P4 x 16 ENGLISH CAUTION Stand Base Front When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 3 4 EA M4 x 14 CAUTION NOTE Remove the stand before installing the TV yy on a wall mount by performing the stand attachment in reverse. Make sure that the screws are fastened yy completely.
ASSEMBLING AND PREPARING Mounting on a table 25 Securing the TV to a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. (For 32CS460, 32CS461, 42CS530, 32/37/42CS560, 32/42LS3400, 32/42LS3450, 32LS3500, 32LS3510) Fix the TV to a table to prevent from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand.
ASSEMBLING AND PREPARING Securing the TV to a wall (optional) (Depending on model) Using the Kensington security system (optional) (For 32CS460, 32CS461, 42CS530, 32/37/42CS560, 22/26LS3500, 22/26LS3510) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table.
ASSEMBLING AND PREPARING Mounting on a wall 27 CAUTION Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. We recommend that you use an LG brand wall mount when mounting the TV to a wall. 10 cm (4 inches) 10 cm Disconnect the power first, and then move yy or install the TV. Otherwise electric shock may occur.
ASSEMBLING AND PREPARING Tidying cables 1 Gather and bind the cables with the cable For CS460, CS461, CS530, CS560, LS3400 For 22/26LS3500, 22/26LS3510 holder. 1 Gather and bind the cables with the cable management clip. 2 Fix the cable management clip firmly to the TV.
MAKING CONNECTIONS 29 MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS Connecting to a HD receiver, DVD, or VCR player Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function.
MAKING CONNECTIONS 31 Component Connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could case the image to display in black and white or with yy distorted color. Check to ensure the cable are matched with the corresponding color connection.
MAKING CONNECTIONS Composite Connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE yyIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
MAKING CONNECTIONS 33 Connecting to a PC NOTE It is recommended to use the TV with the HDMI connection for the best image quality. yy Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or yy brightness.
MAKING CONNECTIONS Connecting to a USB USB IN Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV.
REMOTE CONTROL 35 REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL ENERGY POWER TV SAVING AV MODE INFO RATIO INPUT FLASHBK Q.MENU Accesses the quick menu. Navigation buttons (up/down/left/right) Scrolls through menus or options. OK ꔉ Selects menus or options and confirms your input. ꕣ (BACK) Returns to the previous level. EXIT ꕯ Clears all on-screen displays and returns to TV viewing. LIST SETTINGS SETTINGS Accesses the main menu. Q.MENU ENGLISH OK VOL Adjusts the volume level.
WATCHING TV 37 WATCHING TV Connecting to the AC/DC adapter (For 22/26LS3500, 22/26LS3510) 3 Follow the on-screen instructions to customize your TV settings according to your preferences. Language Selects a language to display. Mode Setting Selects Home Use for the home environment. Time Setting Selects the time zone and daylight saving. Auto Tuning 1 Connect the AC/DC adapter plug to the power input jack on the TV.
TROUBLESHOOTING TROUBLESHOOTING General Problem Solution Cannot control the TV with the remote control. yyCheck the remote control sensor on the product and try again. yyCheck if there is any obstacle between the product and the remote control. to ). yyCheck if the batteries are still working and properly installed ( to , No image display and no sound is produced. yyCheck if the product is turned on. yyCheck if the power cord is connected to a wall outlet.
TROUBLESHOOTING 39 Video Problem Solution An image displays in black and white or the color quality is poor. yyAdjust the color setting in the menu option. yyKeep a sufficient distance between this product and other electronic products. yyScroll to other channels. There may a problem with the broadcast. Horizontal or vertical bars appears or images blur yyCheck if there are local interferences such as an electrical appliance or power tool.
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS 42LS3400 (42LS3400-UA) Dimensions (W x H x D) With stand 795.0 x 566.0 x 207.0 mm (31.2 x 22.2 x 8.1 inch) 1018.0 x 696.0 x 261.0 mm (40.0 x 27.4 x 10.2 inch) Without stand 795.0 x 504.0 x 73.5 mm (31.2 x 19.8 x 2.8 inch) 1018.0 x 629.0 x 76.5 mm (40.0 x 24.7 x 3.0 inch) Weight With stand 9.1 kg (20.0 lbs) 14.7 kg (32.4 lbs) Without stand 8.1 kg (17.8 lbs) 13.1 kg (28.8 lbs) 1.0 A / 70 W 1.
SPECIFICATIONS HDMI (PC) supported mode Resolution Horizontal Frequency (KHz) Component port connecting information Vertical Frequency (Hz) 640 x 350 31.468 70.09 720 x 400 31.469 70.08 640 x 480 31.469 59.94 800 x 600 37.879 60.31 1024 x 768 48.363 60.00 1360 x 768 47.712 60.015 1152 x 864 54.348 60.053 1280 x 1024 63.981 60.02 1920 x 1080 67.50 60.
CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE yy The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
The model and serial number of the TV is located on the back and/or one side of the TV. Record it below should you ever need service. MODEL SERIAL LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 1-888-865-3026 1-888-542-2623 USA, Consumer User USA, Commercial User CANADA Register your product Online! www.lg.
