Installation and Operating Guide Model Numbers | Z42PJ240, Z50PJ240 | PLASMA TV © Copyright 2010, LG Electronics USA, Inc.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
SAFETY INSTRUCTIONS 4 11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FEATURES OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Back Panel Information . . . . . . . . . .
SOUND & LANGUAGE CONTROL APPENDIX Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 56 Preset Sound Settings (Sound Mode) . . . . . . . . . . . . . . . 57 Sound Setting Adjustment - User Mode . . . . . . . . . . . 58 Infinite Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 TV Speakers On/Off Setup . . . . .
FEATURES OF THIS TV ■ This feature is not available for all models. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories.
PREPARATION ACCESSORIES INFO POWER INPUT POWER SAVING Q. MENU 1 2 4 5 6 7 8 9 3 0 FLASHBK LIST MENU CH VOL P A G E PREPARATION Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. ENTER RETURN EXIT MUTE FREEZE RATIO 1.5V 1.
PREPARATION FRONT PANEL INFORMATION ■ Image shown may differ from your TV. PREPARATION Intelligent Sensor Adjusts picture according to the surrounding conditions. Power/Standby Indicator Illuminates red in standby mode. The LED is off while the TV remains on. ENTER VOL CH ENTER POWER Button INPUT Button MENU Button ENTER Button VOL CH VOLUME Buttons CHANNEL Buttons You can operate the button just by touching the button lightly with your finger.
BACK PANEL INFORMATION VIDEO L/MONO AUDIO R 10 9 1 7 AV IN 2 7 R 5 ) 1 HDMI/DVI IN /MONO AUDIO L 1 HDMI/DVI IN Digital Connection. Supports HD video and Digital audio. Doesn’t support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included) 2 OPTICAL DIGITAL AUDIO OUT Optical digital audio output for use with amps and home theater systems. Note: In standby mode, this port doesn’t work. 3 RS-232C IN (CONTROL & SERVICE) PORT Used by third party devices.
PREPARATION STAND INSTRUCTION ■ Image shown may differ from your TV. Installation PREPARATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the Stand Body with the Stand Base of the TV. Stand Body x3 Stand Base M5x14 3 4 Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV.
1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. PREPARATION Detachment x4 M4x28 3 Detach the stand from TV. PROTECTION COVER (Fix a Guide to the Outsides.) Protection Cover After removing the stand, install the included p r o t e c t i o n c o v e r over the hole for the stand. Press the P R O T E C T I O N C O V E R into the TV until you hear it click.
PREPARATION CABLE MANAGEMENT ■ Image shown may differ from your TV. PREPARATION 1 After connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables. To connect additional equipment, see EXTERNAL EQUIPMENT SETUP section.
DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches PREPARATION 4 inches CAUTION G G Ensure adequate ventilation by following the clearance recommendations. Do not mount near or above any type of heat source. SWIVEL STAND (This feature is not available for all models.
PREPARATION VESA WALL MOUNTING PREPARATION Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.
SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND ■ ■ You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.
PREPARATION ■ To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust antenna direction if needed. Outdoor Antenna (VHF, UHF) ) R Multi-family Dwellings/Apartments (Connect to wall antenna socket) ( Wall Antenna Socket VARIABLE AUDIO OUT PREPARATION R 1.
EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ Image shown may differ from your TV. HD RECEIVER SETUP Component Connection 1. How to connect 1 Y PB PR L 2 Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O 1 jacks on the TV. O IN /DVI) 2.
HDMI-DTV OUTPUT 1. How to connect 1 2 Connect the digital set-top box to H D M I / D V I I N 1, 2 or 3 . 1 No separate audio connection is necessary. HDMI supports both audio and video. OPTICAL AUDIO DIGITAL AUDIO OUT (RGB/DVI) Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select the H D M I 1, 2 or 3 input source on the TV using the INPUT button on the remote control. ■ 2 1 HDMI/DVI IN RGB IN(PC) 2.
1. How to connect Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1, 2 or 3 jack on the TV. 2 2. How to use Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select the H D M I 1, 2 or 3 input source on the TV using the I N P U T button on the remote control. R CO 2 2 1 HDMI/DVI IN RGB IN (PC) Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) jack on the TV.
EXTERNAL EQUIPMENT SETUP DVD SETUP Component Connection 1. How to connect EXTERNAL EQUIPMENT SETUP 1 2 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Y PB Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the TV. ■ ■ ■ Turn on the DVD player, insert a DVD.
HDMI Connection 1. How to connect HDMI-DVD OUTPUT Connect the HDMI output of the DVD to the H D M I / D V I I N 1, 2 or 3 jack on the TV. 2 No separate audio connection is necessary. HDMI supports both audio and video. 1 OPTICAL AUD DIGITAL AUDIO OUT (RGB/D ■ Select the HDMI1, 2 or 3 input source on the TV using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions. 2 1 HDMI/DVI IN RGB IN (PC) ■ RS-232C IN (CONTROL & SERVICE) 2.
EXTERNAL EQUIPMENT SETUP VCR SETUP Antenna Connection 1. How to connect EXTERNAL EQUIPMENT SETUP Connect the RF antenna out socket of the VCR to the A N T E N N A / C A B L E I N socket on the TV. 1 ANTENNA/ CABLE IN 1 2 Connect the antenna cable to the RF antenna in socket of the VCR. ANT OUT S-VIDEO ANT IN OUTPUT SWITCH VIDEO L R Wall Jack 2 2. How to use ■ ■ Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
OTHER A/V SOURCE SETUP Camcorder 1. How to connect ■ ■ Select the A V 2 input source on the TV using the I N P U T button on the remote control. If connected to A V I N 1 input, select the A V 1 input source on the TV. Operate the corresponding external equipment. USB IN HDMI IN 3 ■ L 1 R EXTERNAL EQUIPMENT SETUP 2. How to use VIDEO VIDEO L/MONO AUDIO R 1 Video Game Set V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors.
EXTERNAL EQUIPMENT SETUP AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. 1. How to connect OPTICAL DIGITAL AUDIO OUT ! NOTE 1 HDMII/DVI IN 2 When connecting with external audio equipment, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (G p.60) CAUTION G G Do not look into the optical output port. Looking at the laser beam may damage your vision.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. OPTICAL DIGITAL AUDIO OUT VGA (D-Sub 15 pin) Connection REMOTE CONTROL IN AUDIO IN (RGB/DVI) 1. How to connect 2 Connect the PC audio output to the A U D I O I N ( R G B / D V I) jack on the TV. NI C232-SR NI C232-SR RGB IN (PC) RS-232C IN (CONTROL & SERVICE) Connect the VGA output of the PC to the R G B I N ( P C) jack on the TV. 1 VIDEO 1 COMPONEN 1 2 2.
EXTERNAL EQUIPMENT SETUP ! NOTES EXTERNAL EQUIPMENT SETUP G To get the best picture quality, adjust the PC graphics card to 1280x1024 (Z42/50PJ240). G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness.
Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The P o s i t i o n, P h a s e, and S i z e can also be adjusted. PICTURE Move Screen Enter Move MENU Prev. E 90 50 60 60 60 0 Resolution Auto config. G 1024 x 768 1280 x 768 1360 x 768 Position R G Size • Expert Control • Reset Phase Screen (RGB-PC) Reset 1 MENU 2 ENTER 3 Select P I C T U R E. Select R e s o l u t i o n. ENTER Select S c r e e n ( R G B - P C ).
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase PICTURE Move Screen Enter Move MENU Prev. E EXTERNAL EQUIPMENT SETUP If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. • Contrast • Brightness • H Sharpness • V Sharpness • Color • Tint 90 50 60 60 60 0 Resolution Auto config.
Screen Reset (Reset to original factory values) Returns P o s i t i o n, S i z e, and P h a s e to the default factory settings. This feature operates only in RGB-PC mode. Move Screen Enter Move MENU Prev. E • Contrast • Brightness • H Sharpness • V Sharpness • Color • Tint 90 50 60 60 60 0 Resolution Auto config. Position R • Expert Control • Reset Screen (RGB-PC) 2 Phase No G Select P I C T U R E. ENTER Select S c r e e n ( R G B - P C ). ENTER Select R e s e t.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INFO POWER INFO Displays channel information at the top of the screen. INPUT POWER SAVING Q. MENU WATCHING TV / CHANNEL CONTROL Q.MENU Opens the list of Quick Menu options. POWER Turns the TV on from standby or off to standby. 1 2 3 INPUT Rotates through inputs. Also switches the TV on from standby. G p.
NUMBER button LIST Displays the channel list. FLASHBK Tunes to the last channel viewed. THUMBSTICK Navigates the on-screen menus and adjusts the system settings to your preference. (Up/Down/Left Right/ENTER) EXIT Displays the main menu or clears all on-screen displays and returns to TV viewing. RETURN Allows the user to move return one step in an interactive application or other user interaction function.
WATCHING TV / CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, TV is in standby mode. ■ In standby mode to turn TV on, press the , INPUT, CH ( or INPUT, CH( or ), Number (0~9 9) button on the remote control. 1 ) button on the TV or press the POWER, WATCHING TV / CHANNEL CONTROL 2 Select the viewing source by using the I N P U T button on the remote control. 3 When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. H o m e U s e”. We recommend setting the TV to “H H o m e U s e” mode for the best picture Default selection is “H in your home environment. ■ “S S t o r e D e m o” Mode is only intended for use in retail environments.
WATCHING TV / CHANNEL CONTROL ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Q.Menu Aspect Ratio 16:9 F Vivid Sound Mode Standard Off Caption English Multi Audio CH G Sleep Timer Off Del/Add/Fav Add CH Close 1 WATCHING TV / CHANNEL CONTROL Picture Mode A s p e c t R a t i o: Selects your desired picture format.
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Also, make sure to run this function with the antenna connected during TV broadcasting hours. Auto Tuning memorizes only the channels available at the time of scanning.
Add/Delete Channel (Manual Tuning) If you select DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter CHANNEL Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Move Enter DTV F G Select channel type and RF-channel number. Channel 2 DTV 2-1 Bad Normal Good Delete Close 1 MENU Select C H A N N E L. 2 Select M a n u a l T u n i n g.
WATCHING TV / CHANNEL CONTROL Channel Editing When a channel number is deleted, it means that you will be unable to select it using CH , button during TV viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the Channel Edit menu. WATCHING TV / CHANNEL CONTROL CHANNEL Move Enter Auto Tuning Manual Tuning Channel Edit Ch.Change 1 MENU 2 ENTER Select C H A N N E L. Move ■ Select C h a n n e l E d i t.
CHANNEL LIST You can check channels which are stored in the memory by displaying the channel list. Channel List 2-1 3-1 4-1 Exit Displaying Channel List 1 Display the C h a n n e l L i s t. WATCHING TV / CHANNEL CONTROL This padlock is displayed when the channel is locked with parental control. LIST Selecting a channel in the channel list 1 Select a channel. 2 Switch to the chosen channel number. ENTER Paging through a channel list 1 CH P A G E 2 Turn the pages. Return to TV viewing.
WATCHING TV / CHANNEL CONTROL FAVORITE CHANNEL SETUP Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select through all the in-between channels. To tune to a favorite channel, press the F A V (Favorite) button repeatedly. 1 Q.
BRIEF INFORMATION Brief Info shows the present screen information. 1 INFO or ENTER Show the Brief Info on the screen. 2 7 1 2 3 4 5 6 Brief Info Title Test.. DOLBY DIGITAL CNN Sat, Feb 21, 2009 Multilingual 10:40 AM 10:10 AM D CC Caption 11:40 AM 1080i TV-PG D L S V Multilingual : The program contains two or more audio services. Use the Q . M E N U menu to select wanted Audio. CC Caption : The program contains one or more caption services. Use the Q .
WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. TV AV1 AV2 Component1 Component2 WATCHING TV / CHANNEL CONTROL 1 INPUT Select the desired input source. ENTER TV AV1 HDMI3 AV2 Component1 Component2 HDMI1 HDMI2 ie) RGB-PC Disconnected inputs are inactive (grayed out) TV AV1 AV2 Component1 Component2 Input Label Exit Select a desired input source (except T V).
INPUT LABEL This indicates which device is connected to which input port. OPTION Move Enter OPTION Move Enter Language Language Input Label Input Label AV1 : Off AV2 F : Off Key Lock Caption : Off Caption ISM Method : Normal ISM Method Set ID :1 Set ID : Off Component1 : Normal : 1Component2 Initial Setting : Home Use Initial Setting RGB-PC : Home Use G HDMI1 HDMI2 HDMI3 Close With using OPTION menu With using INPUT button 1 1 MENU 2 ENTER 3 ENTER Select O P T I O N.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio. Q.Menu Aspect Ratio F Vivid Sound Mode Standard G 16:9 Just Scan Set By Program Cinema Zoom Zoom 4:3 Off Caption English Multi Audio CH 16:9 Picture Mode Sleep Timer Off Del/Add/Fav Add Close PICTURE CONTROL 1 Q. MENU Select the A s p e c t R a t i o.
16:9 4:3 Adjust the picture horizontally, in a linear proportion to fill the entire screen. Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Just Scan Zoom Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. Just Scan PICTURE CONTROL Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video.
PICTURE CONTROL POWER SAVING It reduces the TV’s power consumption. You can increase the brightness of your screen by adjusting the Power Saving level or by setting the P i c t u r e M o d e. P i c t u r e M o d e -C i n e m a”.
PRESET PICTURE SETTINGS (PICTURE MODE) There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. Q.Menu Aspect Ratio F F Picture Mode G G Vivid Standard Sound Mode Sleep Timer Off Del/Add/Fav Add Cinema Expert2 Game Expert1 Close Select P i c t u r e M o d e. ■ 2 Select V i v i d, S t a n d a r d, , C i n e m a, S p o r t, G a m e, E x p e r t 1or E x p e r t 2. Auto Power Save ■ ■ 3 Sport Return to TV viewing.
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT-USER MODE Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter Aspect Ratio : 16:9 : Intelligent Sensor Picture Mode : Standard E 90 • Brightness 50 • Sharpness 60 • Color 60 • Tint • Contrast 80 E E • Contrast E Power Saving Enter 0 R G E PICTURE CONTROL 1 MENU Select P I C T U R E. 2 ENTER 3 ENTER 4 ENTER Select P i c t u r e M o d e.
PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video seeing differently for each input. To reset to the factory default screen after making adjustments to each video mode, execute the “Reset” function for each Picture Mode.
PICTURE CONTROL EXPERT PICTURE CONTROL By segmenting categories, E x p e r t 1 and E x p e r t 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used by a professional to help optimize the TV performance in the environment the TV is in.
Dynamic Contrast Dynamic Color Noise Reduction Gamma Black Level Color Gamut Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. ■ Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid. ■ Reduces screen noise without compromising video quality.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move Enter PICTURE Move E E • Contrast • Brightness • H Sharpness • V Sharpness • Color • Tint 90 50 60 60 60 0 i R G • Contrast 90 • Brightness 50 • H Sharpness 60 • V Sharpness 60 Resetting video configuration... • Color 60 • Tint 0 R • Expert Control • Reset Screen (RGB-PC) 1 MENU Select P I C T U R E. PICTURE CONTROL 2 ENTER Select R e s e t.
IMAGE STICKING MINIMIZATION (ISM) METHOD A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. Q.Menu Aspect Ratio F F Sound Mode G Standard Music Cinema Standard G Off Caption CH 16:9 16:9 Vivid Picture Mode Multi Audio English Sleep Timer Off Del/Add/Fav Add Game Sport Close Q. MENU Select S o u n d M o d e. ■ 2 Select S t a n d a r d, M u s i c, C i n e m a, S p o r t, or G a m e.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Move Auto Volume Balance Sound Mode AUDIO Enter : Off 0 : Standard Balance L R Sound Mode L • Treble 50 • Treble 50 • Bass 50 • Bass 50 • Reset TV Speaker : On R Off Infinite Sound Treble 50 Bass 50 E • Infinite Sound: Off : On Enter 0 : Standard • Infinite Sound: Off • Reset TV Speaker Move : Off E AUDIO Auto Volume Close 1 2 4 Select A U D I O.
BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. AUDIO Auto Volume Move Enter : Off Balance 0 Sound Mode AUDIO Auto Volume : Standard Balance L R Sound Mode 2 ENTER 0 Balance L • Infinite Sound: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 : On Enter 0 R Close • Reset TV Speaker : On E 1 MENU : Standard • Infinite Sound: Off • Reset TV Speaker Move : Off L R Select A U D I O. Select B a l a n c e.
SOUND & LANGUAGE CONTROL TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. AUDIO Auto Volume Move Enter : Off Balance Auto Volume 0 Sound Mode AUDIO : Standard L R Sound Mode 0 : Standard L • Infinite Sound: Off • Infinite Sound: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 : On • Reset TV Speaker : On Off On SOUND & LANGUAGE CONTROL 1 MENU 2 Select A U D I O. ENTER Select T V S p e a k e r. ENTER Select O n or O f f.
AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Auto Volume Move Balance Sound Mode AUDIO Enter : Off 0 : Standard R • Treble 50 • Bass 50 i MENU 2 ENTER Select A U D I O. Select R e s e t. 3 ENTER Initialize the adjusted value. : Standard L R • Infinite Sound: Off Resetting audio configuration...
SOUND & LANGUAGE CONTROL STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Q.Menu Aspect Ratio F Vivid Sound Mode Standard F F Multi Audio English English Sleep Timer Off Del/Add/Fav Add G SOUND & LANGUAGE CONTROL Close Analog TV 1 Q. MENU 2 Digital TV Select S A P.
AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. ENTER 3 ENTER OPTION Language Input Label Input Label Move Enter Audio Key Lock : Off Key Lock : Off Caption : Off Caption : Off ISM Method : Normal ISM Method : Normal Set ID :1 ISet ID :1 Initial Setting : Home Use Initial Setting : Home Use Select O P T I O N. Select L a n g u a g e. Select A u d i o .
SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. Move Enter Language : Off Key Lock : Off Caption : Off Caption : Off ISM Method : Normal ISM Method : Normal Set ID :1 Set ID :1 Initial Setting : Home Use Initial Setting : Home Use Select O P T I O N. Select L a n g u a g e. ENTER Select M e n u. 4 ENTER Select your desired language.
CAPTION MODE Analog Broadcasting System Captions Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
SOUND & LANGUAGE CONTROL Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On.
Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is turned On.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
Manual Clock Setup If the current time setting is wrong, set the clock manually. TIME Move Enter Clock TIME Move Enter F Clock Manual G Off Time : Off Off Time : Off Year On Time : Off On Time : Off Month 2 Date 21 Hour 2 AM Sleep Timer : Off Sleep Timer : Off 2008 Minute 10 Eastern Time Zone Daylight Saving Auto Close 1 MENU Select T I M E. G ENTER Select C l o c k. ENTER Select M a n u a l.
TIME SETTING AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work. If you do not press any button within 2 hours after the TV turns on with the O n T i m e function, the TV will automatically revert to standby mode.
SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. Q.Menu Aspect Ratio 16:9 16:9 F Vivid Sound Mode Standard Off Caption English Multi Audio Sleep Timer CH G Picture Mode F Off G Add Del/Add/Fav Close 1 Q. MENU ■ 2 Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 1 2 0, 1 8 0, or 2 4 0 minutes. 3 Return to TV viewing. You can also adjust S l e e p T i m e r in the T I M E menu.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Lock System 1 MENU 2 1 2 4 5 6 7 8 9 Enter : Off LOCK Move Lock System : On Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Enter Off On Select L O C K. 3 Input the password. 0 3 4 ENTER Select O n or O f f.
PARENTAL CONTROL / RATINGS Set Password Change the password by inputting a new password twice. LOCK Move Lock System 1 MENU 2 1 2 4 5 6 7 8 3 9 Enter : Off LOCK Lock System Set Password Set Password Block Channel Block Channel Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER Select L O C K. Input the password. PARENTAL CONTROL / RATING 74 Select S e t p a s s w o r d.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Lock System Enter : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Ch.Change 1 MENU ENTER 2 1 2 4 5 6 7 8 3 9 Move CH Move Page Previous Block/Unblock Select L O C K. Input the password. 0 3 4 ENTER Select a channel to block or unblock. 5 Blue Block or unblock a channel.
PARENTAL CONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
TV Rating Children Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
PARENTAL CONTROL / RATINGS TV Rating General Based on the ratings, blocks certain TV programs that you and your family do not want to view.
DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Region5 Rating data.
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input.
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
APPENDIX TROUBLESHOOTING Abnormal Operation Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries. *This feature is not available for all models.
Audio Problems Press the VOL or VOLUME button. Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ ■ Picture OK & No sound No output from one of the speakers ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. ■ Check HDMI cable over version 1.3.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PRODUCT SPECIFICATIONS MODEL Z50PJ240 (Z50PJ240-UB) Dimensions (Width x Height x Depth) With stand 988 mm x 678.7 mm x 260 mm (38.8 inch x 26.7 inch x 10.2 inch) 1171.4 mm x 781.8mm x 309.7 mm (46.1 inch x 30.7 inch x 12.1 inch) Without stand 988 mm x 617.8 mm x 55.3 mm (38.8 inch x 24.3 inch x 2.1 inch) 1171.4 mm x 720.9 mm x 55.3 mm (46.1pouces x 28.3 inch x 2.1 inch) Weight With stand Without stand 21.6 kg (47.6 lb) 20 kg (44.0 lb) 30 kg (66.1 lb) 27.6 kg (60.
APPENDIX IR CODES (This feature is not available for all models.) 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
(Hexa) Code Function Note 08 POWER Remote control Button (Power On/Off) D6 45 Q.
APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. ■ Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software.
RS-232C Configurations Either cable below can be used. 7-Wire Configuration (Serial female-female NULL modem cable) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DTR DSR RTS CTS Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’.
APPENDIX Command Reference List COMMAND1 COMMAND2 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select k x k k k k k k k k k k a b c d e f g h i j k l COMMAND1 COMMAND2 21. Channel Tuning m a DATA (Hexadecimal) 00 ~ 01 (G p.91) (G p.91) 00 ~ 01 00 ~ 01 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 01 COMMAND1 COMMAND2 13. Remote Control Lock Mode 14. Treble 15. Bass 16.
01. Power (Command: k a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge.
APPENDIX 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. 08: Normal 20: Color Wash Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 19. Power saving (Command: j q) To control the low energy function on/off. Transmission [ j ][q][ ][Set ID][ ][Data][Cr] 13.
Data 05: 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 3 2 1 0 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved ...