Use and Care Manual

26
HOW TO USE
FABRIC SOFTENER
The fabric softener is dispensed in the final rinse. Se-
lect the FABRIC SOFTENER button if you are using
fabric softener.
EXTRA RINSE
This option will add an extra rinse to the selected cycle.
Use this option to help ensure the removal of detergent
or bleach residue from fabrics. Liquid fabric softener, if
used, is always dispensed in the final rinse. Press and
hold the TURBO WASH™ button for three seconds to
activate or deactivate EXTRA RINSE.
NOTE:
You cannot select the Extra Rinse option with
the Spin Only option.
WATER PLUS
Use this option if you wish to add more water to your wash
load. This option is especially useful for large or bulky
loads. Press and hold the FABRIC SOFTENER button for
3second to activate or deactivate SIGNAL. The melody
and button tones can be turn off.
NOTE:
y If the washing machine reaches its maximum water
level, the WATER PLUS button will have no effect.
y You cannot select the WATER PLUS option in the
Tub Clean and Bulky.
SIGNAL ON/OFF
The washing machine plays a melody when the wash
cycle has finished. Press and hold the COLD WASH
button for three seconds to activate or deactivate
SIG NAL. When no signal is heard, the signal is off. The
volume settings are ON/OFF.
CHILD LOCK
Use this option to disable the controls. The washer can
only be locked during a cycle. This feature can prevent
children from changing cycles or operating the ma-
chine. Once the Child Lock is set, it must be deactivat-
ed before any controls, except the POWER button, can
be used. Once the washer has shut off, the POWER
button will allow the machine to be turned ON, but
the controls will still be locked. When the controls are
locked, CL will display alternately with the estimated
time remaining. Press and hold the SOIL LEVEL button
for five seconds to activate or deactivate Child Lock.
NOTE: Once the controls are locked, they must be
manually unlocked to restore operation.
ADD GARMENTS
Laundry may ONLY be added to the load at the
proper time in the wash cycle. When the ADD GAR-
MENTS light is illuminated, it is safe to pause the cy-
cle and add more items to the load. If garments are
added when the ADD GARMENTS light is off, the
washer will not adjust for these items which could
result in poor performance and/or fabric damage.
1. Press the START/PAUSE button to pause the
washer while the Add Garments light is on.
2. Open the lid after it unlocks.
3. Add your additional items.
4. Close the lid.
5. Press the START/PAUSE button. The cycle will
resume after the lid locks.
NOTE:
y The ADD GARMENTS light is an indicator only and is
not selected by pressing the SPECIAL USE button.
y If the washer remains idle for nine minutes after
pausing the cycle, the water in the tub will drain.