Use and Care Manual

ManualsBrandsLG Electronics ManualsAppliances2.3 cu. ft. All-in-one Graphite Steel Front Load Electric Washer and Ventless Dryer Combo

OPERATION

Using the Washer

Load the laundry into the washing machine and close the door.

Press the Power button.

- The lights around the cycle selector knob will illuminate and a chime will sound.

Turn the cycle selector knob in either direction to select the desired cycle.

- The proper default option is automatically set according to the wash cycle. See

page 23, Cycle Guide, for more detailed default options for each cycle.

- See page 24, Wash Cycles, for details on the wash cycles.

- To change the options, press the option button and select the desired option.

See page 25, Setting Options Before Cycle, for more details on options.

- Skip to step 4 to use the default setting without changing the options.

Add the proper amount of detergent and additions (bleach, softener) into the

detergent dispenser drawer.

See page 20, Using Detergent/Fabric Softener, for more details on using

detergent.

Press the Start/Pause button.

- The washing machine will start.

When the melody plays, the wash cycle is finished.

- When the washing cycle is finished, the door will unlock. Open the door and

remove the laundry immediately.

- Make sure to check around the door seal when taking out the finished load.

Small items may be caught in the door seal.

NOTE

The front-load washing machine rotates the laundry in a way that allows it to use less water while still

fully saturating your clothing. It is normal to not be able to see water during the wash cycle.

If the temperature or the water level inside the machine is too high, the door locks and cannot be

opened.

If drying items, make sure the drum is no more than half full before beginning the dry cycle.

WARNING

To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY

INSTRUCTIONS before operating this appliance.

Summary of content (13 pages)

PAGE 1
22 OPERATION OPERATION Using the Washer 1 Load the laundry into the washing machine and close the door. 2 Press the Power button. - The lights around the cycle selector knob will illuminate and a chime will sound. Turn the cycle selector knob in either direction to select the desired cycle. 3 - The proper default option is automatically set according to the wash cycle. See page 23, Cycle Guide, for more detailed default options for each cycle.
PAGE 2
OPERATION 23 The cycle guide below shows the options and recommended fabric types for each cycle.  = Available option BASIC OPTION (=DEFAULT) ADDITIONAL OPTIONS CYCLE FABRIC TYPE Soil Pre Delay Add Temp. Spin Dry Steam Wash Level Wash Garments AllergieneTM Cotton, underwear, pillow Heavy Ex.Hot Ex.High covers, bed sheets, baby Normal High *    wear Med. Low No Spin Baby Wear Lightly soiled baby clothes Heavy Hot  High Normal Warm Med. **    Low No Spin Perm.
PAGE 3
24 OPERATION Wash Cycles You can wash laundry items more thoroughly by selecting the wash cycle that best suits the type of items to be washed. Turn the cycle selector knob in either direction to select the desired cycle. When you select a wash cycle, the light for the corresponding wash cycle will turn on. See page 22, Using the Washer, for more details on operating methods. Sanitary: Reducing Laundry Bacteria This wash cycle helps to remove heavy soil on laundry through high temperature.
PAGE 4
OPERATION 25 Each cycle has preset settings that are selected automatically. You may also customize the settings using the cycle modifier buttons. Press the button for that option to view and select other settings. The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. It may seem there is no water inside the drum in some cycles, but this is normal.
PAGE 5
26 OPERATION Dry ( ) Press the Dry button to select drying options. • For consistently dry loads, all articles in the load should be similar in material and thickness. • Do not overload the drum. Items must have room to tumble freely. • Press Start/Pause to remove items before the dry cycle has finished. Press the Dry button repeatedly to toggle through the selections: By pressing the Dry button, you can select: Low Temp.
PAGE 6
OPERATION Cycle Description Normal ( ) For cottons. Reduces the drying time and energy usage during the dry cycle. Normal Eco ( ) Saves energy. Low Temp. ( ) Damp Dry ( ) Time 30 min. Time 60 min. Time 120 min. Fabric Type Cotton or linen fabrics such as cotton towels, t-shirts, and linen clothing. ) Steam Wash features enhanced washing performance with low energy consumption. 1 Press the Power button. 2 Select a compatible wash cycle (see Cycle Guide). 3 Press the Steam button.
PAGE 7
28 OPERATION Setting Options During Cycle Heavy Soil ( You can add the desired options during the wash cycle. Select this option to wash heavily soiled laundry with more power than the standard cycle. Press and hold the Steam button for 3 seconds to select the option. Control Lock You can lock the washing machine to prevent children or others from changing the cycle settings by pressing the buttons during the cycle.
PAGE 8
MAINTENANCE 29 Regular Cleaning 6 Press the Spin Speed button for draining and Care After Wash 7 Press the Start/Pause button. After the cycle is finished, wipe the door and the inside of the door seal to remove any moisture. Leave the door open to dry the washer tub interior. Wipe the body of the washing machine with a dry cloth to remove any moisture. WARNING yy Unplug the washer before cleaning to avoid the risk of electric shock.
PAGE 9
30 MAINTENANCE Thawing a Frozen Drain Line 1 Pour hot water in the washer tub and close the door. - Leave it for 10 minutes. 2 Press the Power button after 10 minutes. 3 Press the Spin Speed button for draining and spinning. 4 Press the Start/Pause button. - Check if the water drains. Cleaning Periodically clean the washing machine to help maintain its performance and to minimize the chance of malfunction.
PAGE 10
MAINTENANCE Removing Mineral Buildup If you live in an area with hard water, mineral scale can form on the internal components of the washing machine. Take extra care to periodically clean the mineral buildup on the internal components to extend the lifespan of the washing machine.
PAGE 11
32 MAINTENANCE WARNING Cleaning the Water Inlet Filters Clean the water inlet filters periodically to prevent clogging. Take extra care to clean the water inlet filters in areas using hard water. Water may not be supplied if there are foreign objects, such as rust, sand, or stones in the water inlet filters. 1 Press the Power button to turn off the washing machine and pull out the plug. 2 Turn off the faucets connected with the water inlets. 3 Remove the water inlets.
PAGE 12
MAINTENANCE 6 Recap the plug onto the drain hose and reattach the drain hose. The washing machine fails to drain if the drain pump filter is clogged. Periodically clean the drain filter to prevent clogging with foreign objects. 1 Press the Power button to turn off the washing machine and pull out the plug. 2 Open the drain pump filter cover. 7 Insert the drain pump filter. 3 Unclip the drain hose and remove the plug from the drain hose to drain the remaining water. 8 Close the drain pump filter cover.
PAGE 13
34 MAINTENANCE Cleaning the Door Seal Clean the door seal once a month to prevent buildup of dirt in the door seal. 1 Wear rubber gloves and protective goggles. 2 Dilute 3/4 cup (177 ml) of liquid chlorine bleach in 1 gallon (3.8 L) of water. 3 Soak a sponge or a soft cloth in this diluted solution and wipe down all around the door seal. 4 Wipe any moisture with a dry towel or cloth after cleaning. 5 Leave the door open to allow the door seal to dry completely.