Owners manual

ManualsBrandsLG Electronics ManualsCell PhoneVX6100

VX6100

The Battery

The phone comes with a rechargeable battery. Keep the battery

charged while not in use in order to maximize talk and standby

time. The battery charge level is shown at the top of the LCD

screen.

Installing the Battery

To install the battery, insert the battery into the opening on the

back of the phone. Put the battery cover on the battery and

push it slightly upwards.

Removing the Battery

Turn the power off. While pressing the PUSH button on the back

of the phone, pull the battery cover downwards and remove it.

Then remove the battery by pressing the upper area of it.

Charging the Battery

To use the charger provided with your phone:

Warning! Use only the charger provided with the phone. Using

any charger other than the one included with the VX6100 may

damage your phone or battery.

1. Plug the round end of the adapter into the phone’s charger

jack and the other end into an electrical outlet.

2. The charge time varies depending upon the battery level.

The maximum charge time for a fully discharged battery is

3.5 hours.

NOTE: It is important to fully charge the battery before

initial use of the phone.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen.

When the battery charge level becomes low, the low battery sensor

alerts you in three ways: sounding an audible tone, blinking the

battery icon, and displaying

LOW BATTERY WARNING! If the battery

charge level becomes exceedingly low, the phone automatically

switches off and any function in progress is not saved.

Turning the Phone On and Off

Turning the Phone On

1. Install a charged battery or connect the phone to an external

power source such as a vehicle power charger or hands-free

car kit.

2. Press for a few seconds until the LCD screen lights up.

Turning the Phone Off

1. Press and hold until the display turns off.

Signal Strength

Call quality depends on the signal strength in your area. The signal

strength is indicated on the screen as the number of bars next to the

signal strength icon: The more bars, the better the signal strength. If

the signal quality is poor, move to an open area. If you are in a

building, the reception may be better near a window.

NOTE: Like any other radio device, avoid any unnecessary

contact with the antenna while your phone is on.

Fully DischargedFully Charged

Getting Star

ted W

ith Y

our Phone

VX6100-(E)small.QXD 9/15/04 6:16 PM Page 16