Owners manual

The Battery
The phone comes with a
rechargeable battery. Keep the
battery charged while not in use
in order to maximize talk and
standby time. The battery charge
level is shown at the top of the
LCD screen.
Installing the Battery
To install, insert the battery into
the opening on the back of the
phone and gently press down
until the latch snaps into place.
Removing the Battery
1. Make sure the power is off so
that you don’t lose any stored
numbers or messages.
2. Press the battery release latch
down and remove the battery
from the phone.
Charging the Battery
To use the charger provided with
your phone:
Warning! Use only the charger
provided with the phone. Using
any charger other than the one
included with the UX260 may
damage your phone or battery.
1. Plug the end of the adapter
into the phone’s charger port
and the other end into an
electrical outlet.
2. The charge time varies
depending upon the battery
level.
Note
It is important to fully charge the
battery before initial use of the phone.
Getting Started with Your Phone
18
Getting Started with Your Phone
NNOOTTIICCEE
Triangle symbol
should face up.
UX260_Eng.qxd 1/24/08 11:52 AM Page 18