User guide

Getting Started 9
Getting Started
1
Connecting the AC
Adapter
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet. Then
the unit goes into standby mode.
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
>
Caution
Auto Power Down
This unit will be off itself to save electronic
consumption in the case main unit is not
connected to external device and is not used for 25
minutes.
So does this unit after six hours since Main unit
has been connected to other device using analog
input.
Setting the Clock
If the power has been interrupted or the
power plug has been disconnected, the clock
setting is erased.
,
Note
Setting the Clock
Automatically
y
Make sure that your iPod/iPhone/iPad
or your Android device has set the clock
correctly.
y
In standby mode, the clock will not
synchronize with your iPod/iPhone/iPad or
your Android device.
y
In auto clock synchronization, “LG Bluetooth
Remote” app has priority over the docking
system.
y
The 24 hour format can be set only for
Android OS.
,
Note
Setting the Clock by Synchronizing
with Your iPod/iPhone/iPad
Connect the iPod/iPhone/iPad rmly. Then the
clock setting in the control panel will synchronize
with your iPod/iPhone/iPad.
The synchronized time may be slightly
different from that of your iPod/iPhone/iPad.
,
Note
Setting the Clock through “LG
Bluetooth Remote” App
Install “LG Bluetooth Remote” app on your iPod
touch/iPhone/iPad or your Android device. (see
page 16-17)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth
connection through “LG Bluetooth Remote” app.
ND5521-FC.BDEULLK_ENG.indd 9 12. 10. 10. �� 1:41