OWNER’S MANUAL Wall Mounting Bracket Please read this manual carefully before operating your set and retain it for future reference. LSW200B LSW200BG LSW200BX LSW200BXG LSW400B LSW400BG P/NO : MFL63640502 (1101-REV03) www.lg.
* 1 Year Warranty If material or workmanship proves defective under normal use, during the warranty period, please contact the retailer where you purchased it. This warranty is good only to the original purchaser of the product and effective only in the local area.
ENGLISH Caution Install the product according to the directions in the user manual. If the product is not installed based on the directions in the user manual, it can cause a serious injury or damage to the product. During the installation, check the type of wall material and use the sealed anchor and screw if the conditions comply. When installing the product or adjusting the height of the product after installing, always do so with 2 people.
Installation method - Tools you will need : Phillips head "+" driver(Manual or motorized) Ø4mm drill bit for wood or steel / Level / Stud finder / Drill. You may also need an 8mm socket wrench or an 8mm drill bit for concrete. - Installation method is described based on the LSW200B model. The actual product may differ from the picture.
ENGLISH → If the screw cannot be assembled in the designated location inevitably, it can be assembled by rearranging to the closest location. But, do not change 2 or more locations from the designated spot. → LSW200B/LSW200BG/LSW200BX/LSW200BXG : Assemble the wall mount screw on 1 left and 1 right location on the top part and 1 left and 1 right location on the bottom part.
5 How to level the Display After installing the display, check to make sure it is level. The wall mount has two screws that make minor adjustments to the level. LSW200B/LSW200BG/LSW200BX/LSW200BXG : ± 5mm(Leveling) LSW400B/LSW400BG : ± 10mm(Leveling) Cable arrangement and set protection cushion 6 - Arrange the cables as shown in the picture. Use some type of cable banding device to hold all the cables together.
[ Unit : mm ] 145 ° ~ ° ± ° Max. Min. ڌڐڌ Max. YW Min. 145 < LSW400B/LSW400BG> Max. Max. Min. Min.
The model and serial number of the product is located on the back or one side of the product. Record it below should you ever need service. MODEL SERIAL Supported Displays (Consult the retailer for detail list of models.