Use and Care Manual

ENGLISH
35
Replacing the oven door
1. Firmly grasp both sides of the door at the top and
close the door to the removal position (approximately
ve degrees).
Hinge arm
Indentation
Bottom edge
of slot
2. Seat the indentation of the hinge arm into the bottom
edge of the hinge slot.
Hinge lock
Hinge arm
3. Open the door to its full extension. Push the hinge
locks down against the front frame of the oven cavity
to the locked position. Close the oven door.
REMOVING AND REPLACING
THE OVEN DOOR AND WARMING
DRAWER
• Be careful when removing and lifting the door.
• DO NOT lift the door by the handle.
• DO NOT hit the glass with pots, pans, or any other
object.
• Scratching, hitting, jarring or stressing the glass
may weaken its structure, causing an increased risk
of breakage at a later time.
CAUTION
Removing the oven door
1. Fully open the door. Lift up the hinge locks toward the
oven frame until they stop.
Slot
Hinge lock
2. Close the door to the removal position (approximately
ve degrees).
About 5˚
3. Lift the door up and out until the hinge arm is clear o
of the slot. Put the door on the oor.
CARE AND CLEANING