- LG - Life's Good Air Conditioner User Manual

12 Air Conditioner

During Healthy Dehumidification Operation

❏ If you select the dehumidification mode on the OPERATION MODE

SELECTION BUTTON, the product starts to run the dehumidification function.

It automatically sets the room temperature and airflow volume to the best

condition for dehumidification, based on the sensed current room temperature.

In this case, however, the setting temperature is not displayed on the remote

controller and you are not able to control the room temperature either.

❏ During the healthy dehumidification function, the fan speed is automatically set

according to the optimization algorithm responding to the current room

temperature status, so that the room condition is kept healthy and comfortable

even in the very humid season.

Operating Instructions

The temperature and fan speed are automatically set by the electronic controls based on the

actual room temperature.

If you feel hot or cold, press TEMPERATURE SETTING buttons for more cooling or heating effect.

You cannot switch the indoor fan speed. It has already been set by the Auto Operation Mode rule.

Auto Operation(Optional)

Healthy Dehumidification Operation

MODE

This operation is basically heating or cooling function of the air

conditioner. But during this operation the controller changes the

operation mode automatically to keep the temperature within

±2°C with respect to the setting temperature.

Auto Changeover Operation (Optional)

MODE

TEMP

Code Feel

2 Cold

1 Slightly cool

0 Neutral

-1 Slightly warm

-2 Warm

❈

Please select the code

as per your requirement.

You can set desired temperature and indoor fan speed.

Setting Temp. Range : 18~30°C(64°F~86°F).

: You can not set the actual setting temperature and the fan speed in

this operation mode ,But you can use the Auto swing in this

operation. If the system is not operating as desired,switch manually

to another mode

NOTE